CA Parting 77 Chevy/GMC 1/2 ton 2wd - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 03-28-2011, 12:18 AM

This is a mix/match truck so many of the parts came from various trucks.

5 lug front suspension/disc brakes- $150 local

350 engine with rebuilt top end- $500 local

th350- $200 local

tilt column with key- $80 plus shipping

HEI- $40 plus shipping

instrument bezel- $25 plus shipping

gas tank straps- $20 per pair plus shipping

exhaust manifolds- $20 each plus shipping

I will be making a trailer out of the back end. If you see any parts you want please respond in thread to avoid confusion. I will give 2 days after answering a question on a part and then it goes to next in line.
Thanks,
Ray

KrazyRay · 03-28-2011, 12:29 AM

pics

KrazyRay · 03-28-2011, 12:42 AM

more

Project Nico · 03-29-2011, 10:42 PM

How much to ship the dash pad to Bell Gardens, CA 90201....if Scotth doesn't take it.

wklink · 03-28-2011, 04:23 AM

What would the entire power window setup run? Wouldn't mind adding it to my 77 gmc.

classic lover · 03-28-2011, 10:03 AM

this will be a little strange but if you can sell me the rear window middle rubber a have photo to help you i dont know what you call it

**ScottH** · 03-28-2011, 11:27 AM

Ray, what kind of shape is the dashpad in?
Also how much for the mini tach?

Thanks
Scott

KrazyRay · 03-28-2011, 12:04 PM

wklink- I would like to sell the doors whole...$100 pair and I have a friend that could run them to WA if you are in no hurry.

classic lover- Sorry, I want to sell the window complete...$30 local only

ScottH- The dash is good except the cracks in the pic at the speaker. $40 plus shipping. The tach is $26 shipped.

Thanks,
Ray

wklink · 03-28-2011, 10:13 PM

Let me think about it. I'm not sure how hard it is to rewire the whole thing, plus I suspect that I will have to get the motors rebuilt. I'm not sure that power windows are that big a deal to me. Price is certainly right but I don't need whole doors.

KrazyRay · 03-29-2011, 01:13 AM

Quote:

Originally Posted by wklink

Let me think about it. I'm not sure how hard it is to rewire the whole thing, plus I suspect that I will have to get the motors rebuilt. I'm not sure that power windows are that big a deal to me. Price is certainly right but I don't need whole doors.

There is some problems with the power doors. pm sent.

**ScottH** · 03-28-2011, 10:58 PM

Ray, can u LMK what shipping on the dashpad would be to 08753?
I know u r no stranger to shipping parts, but the last 2 dashpad I had shipped did not make it in the same shape as they were before they shipped. So if u could figure in any extra padding needed, I would appreciate it.

Will pass on tach for now.

Thanks
Scott

KrazyRay · 03-28-2011, 11:51 PM

Scott, The shipping is steep. Fedex wants $77. That makes it $117 shipped.
Thanks,
Ray

BigRed76 · 03-29-2011, 12:15 AM

I am interested in the wood grain inserts on the door panels...kind of hard to see in the pics but would you consider them DD quality?

If so, how much?

KrazyRay · 03-29-2011, 12:57 AM

Quote:

Originally Posted by BigRed76

I am interested in the wood grain inserts on the door panels...kind of hard to see in the pics but would you consider them DD quality?

If so, how much?

I would think they are daily driver...one has a scrape that sort of blends in and they are a bit faded. $30 shipped to CO. I offered the whole doors to wklink for the power parts. I need to see if he declines.
Thanks,
Ray

BigRed76 · 03-29-2011, 06:30 PM

Quote:

Originally Posted by KrazyRay

I would think they are daily driver...one has a scrape that sort of blends in and they are a bit faded. $30 shipped to CO. I offered the whole doors to wklink for the power parts. I need to see if he declines.
Thanks,
Ray

Ok, just let me know if he takes them or not

hotrodhomi · 03-29-2011, 06:42 PM

is this thing lowered? I need some drop spindles.

Project Nico · 03-29-2011, 10:24 PM

Quote:

Originally Posted by KrazyRay

This is a mix/match truck so many of the parts came from various trucks.

5 lug front suspension/disc brakes- $150 local

350 engine with rebuilt top end- $500 local

th350- $200 local

tilt column with key- $80 plus shipping

HEI- $40 plus shipping

instrument bezel- $25 plus shipping

gas tank straps- $20 per pair plus shipping

exhaust manifolds- $20 each plus shipping

I will be making a trailer out of the back end. If you see any parts you want please respond in thread to avoid confusion. I will give 2 days after answering a question on a part and then it goes to next in line.
Thanks,
Ray

I'm interested in the Dash Bezel. How much to ship to 90201?

**ScottH** · 03-29-2011, 10:46 PM

Ray, I'll take the dashpad as long as u can package it so it doesnt get any more cracks during shipping.

Thanks
Scott

KrazyRay · 03-30-2011, 01:02 AM

hotrodhomi- The truck is not lowered.

Project Nico- $37 shipped to socal, 2nd on the dash pad

ScottH- I'm 2 for 2 so far on dash pad shipping...Let's hope the fedex fork lift operator has a good day.

Thanks,
Ray

KrazyRay · 03-30-2011, 01:13 AM

Here's a pic of the hacked wiring on the doors.

Project Nico · 03-30-2011, 09:18 AM

Ray ill take the dash bezel. Send me aPM on how to send payment.
Posted via Mobile Device

bnb0221 · 03-30-2011, 09:25 AM

is it duel tanks, if what do u want for the values and switches, i have the tanks just need everything else

bossrod · 03-30-2011, 08:32 AM

What do you want for the complete steering wheel including the cancellation cam? What do you rate the condition? Would be shipped to 06340.

Thanks

Jim

KrazyRay · 03-30-2011, 10:43 AM

bossrod- $38 shipped...I will get pics

Project Nico- pm sent

bnb0221- These parts are in unknown condition. It also requires the crossover fuel lines and wiring. I will have the cab off today to get a better look.

Thanks,
Ray

Project Nico · 03-30-2011, 11:58 AM

Ray payment sent.Thanks
Posted via Mobile Device

03-28-2011, 12:18 AM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Parting 77 Chevy/GMC 1/2 ton 2wd This is a mix/match truck so many of the parts came from various trucks. 5 lug front suspension/disc brakes- $150 local 350 engine with rebuilt top end- $500 local th350- $200 local tilt column with key- $80 plus shipping HEI- $40 plus shipping instrument bezel- $25 plus shipping gas tank straps- $20 per pair plus shipping exhaust manifolds- $20 each plus shipping I will be making a trailer out of the back end. If you see any parts you want please respond in thread to avoid confusion. I will give 2 days after answering a question on a part and then it goes to next in line. Thanks, Ray Attached Images

03-28-2011, 12:29 AM	#2
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Chevy/GMC 1/2 ton 2wd pics Attached Images

03-28-2011, 12:42 AM	#3
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Chevy/GMC 1/2 ton 2wd more Attached Images

03-29-2011, 10:42 PM	#4
Project Nico Registered User Join Date: Feb 2011 Location: Bell Gardens, CA Posts: 114	Re: Parting 77 Chevy/GMC 1/2 ton 2wd How much to ship the dash pad to Bell Gardens, CA 90201....if Scotth doesn't take it.

03-28-2011, 04:23 AM	#5
wklink Junior Member Join Date: Sep 2006 Location: Olympia, WA Posts: 122	Re: Parting 77 Chevy/GMC 1/2 ton 2wd What would the entire power window setup run? Wouldn't mind adding it to my 77 gmc. __________________ I let my 16 year old son drive my every car that I own. I don't let him drive my truck. A man has to draw a line somewhere.

03-28-2011, 10:03 AM	#6
classic lover Registered User Join Date: Mar 2011 Location: newyork Posts: 6	Re: Parting 77 Chevy/GMC 1/2 ton 2wd this will be a little strange but if you can sell me the rear window middle rubber a have photo to help you i dont know what you call it

03-28-2011, 11:27 AM	#7
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Parting 77 Chevy/GMC 1/2 ton 2wd Ray, what kind of shape is the dashpad in? Also how much for the mini tach? Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon Last edited by ScottH; 03-28-2011 at 11:29 AM.

03-28-2011, 12:04 PM	#8
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Chevy/GMC 1/2 ton 2wd wklink- I would like to sell the doors whole...$100 pair and I have a friend that could run them to WA if you are in no hurry. classic lover- Sorry, I want to sell the window complete...$30 local only ScottH- The dash is good except the cracks in the pic at the speaker. $40 plus shipping. The tach is $26 shipped. Thanks, Ray

03-28-2011, 10:13 PM	#9
wklink Junior Member Join Date: Sep 2006 Location: Olympia, WA Posts: 122	Re: Parting 77 Chevy/GMC 1/2 ton 2wd Let me think about it. I'm not sure how hard it is to rewire the whole thing, plus I suspect that I will have to get the motors rebuilt. I'm not sure that power windows are that big a deal to me. Price is certainly right but I don't need whole doors. __________________ I let my 16 year old son drive my every car that I own. I don't let him drive my truck. A man has to draw a line somewhere.

03-28-2011, 10:58 PM	#11
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Parting 77 Chevy/GMC 1/2 ton 2wd Ray, can u LMK what shipping on the dashpad would be to 08753? I know u r no stranger to shipping parts, but the last 2 dashpad I had shipped did not make it in the same shape as they were before they shipped. So if u could figure in any extra padding needed, I would appreciate it. Will pass on tach for now. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-28-2011, 11:51 PM	#12
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Chevy/GMC 1/2 ton 2wd Scott, The shipping is steep. Fedex wants $77. That makes it $117 shipped. Thanks, Ray

03-29-2011, 12:15 AM	#13
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: Parting 77 Chevy/GMC 1/2 ton 2wd I am interested in the wood grain inserts on the door panels...kind of hard to see in the pics but would you consider them DD quality? If so, how much? __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

03-29-2011, 06:42 PM	#16
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: Parting 77 Chevy/GMC 1/2 ton 2wd is this thing lowered? I need some drop spindles. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

03-29-2011, 10:46 PM	#18
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Parting 77 Chevy/GMC 1/2 ton 2wd Ray, I'll take the dashpad as long as u can package it so it doesnt get any more cracks during shipping. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-30-2011, 01:02 AM	#19
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Chevy/GMC 1/2 ton 2wd hotrodhomi- The truck is not lowered. Project Nico- $37 shipped to socal, 2nd on the dash pad ScottH- I'm 2 for 2 so far on dash pad shipping...Let's hope the fedex fork lift operator has a good day. Thanks, Ray



Register or Log In To remove these advertisements.

03-30-2011, 01:13 AM	#20
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Chevy/GMC 1/2 ton 2wd Here's a pic of the hacked wiring on the doors. Attached Images

03-30-2011, 09:18 AM	#21
Project Nico Registered User Join Date: Feb 2011 Location: Bell Gardens, CA Posts: 114	Re: Parting 77 Chevy/GMC 1/2 ton 2wd Ray ill take the dash bezel. Send me aPM on how to send payment. Posted via Mobile Device

03-30-2011, 09:25 AM	#22
bnb0221 Registered User Join Date: Jan 2011 Location: springdale arkansas Posts: 41	Re: Parting 77 Chevy/GMC 1/2 ton 2wd is it duel tanks, if what do u want for the values and switches, i have the tanks just need everything else

03-30-2011, 08:32 AM	#23
bossrod Registered User Join Date: Feb 2004 Location: Groton, CT Posts: 168	Re: Parting 77 Chevy/GMC 1/2 ton 2wd What do you want for the complete steering wheel including the cancellation cam? What do you rate the condition? Would be shipped to 06340. Thanks Jim

03-30-2011, 10:43 AM	#24
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Chevy/GMC 1/2 ton 2wd bossrod- $38 shipped...I will get pics Project Nico- pm sent bnb0221- These parts are in unknown condition. It also requires the crossover fuel lines and wiring. I will have the cab off today to get a better look. Thanks, Ray

03-30-2011, 11:58 AM	#25
Project Nico Registered User Join Date: Feb 2011 Location: Bell Gardens, CA Posts: 114	Re: Parting 77 Chevy/GMC 1/2 ton 2wd Ray payment sent.Thanks Posted via Mobile Device

Register or Log In To remove these advertisements.