console parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jonesky2 · 04-05-2011, 11:26 PM

does anybody know were to get the chrome strip that goes all the way around?

jonesky2 · 04-06-2011, 10:47 PM

in between the red lol

**Gary 70 Jimmy** · 04-07-2011, 08:04 AM

The venders should have them.

jonesky2 · 04-07-2011, 12:46 PM

Quote:

Originally Posted by Gary 70 Jimmy

The venders should have them.

cant seem to find the chrome strip

yellow70 · 04-07-2011, 11:05 PM

ttt

71jimmy · 04-08-2011, 01:27 AM

I don't think anyone makes that chrome strip, I had looked a while back for my console, and I had to buy a used strip. Got lucky it's in really good conition. Try looking in the parts section or on e-bay for console parts.

**Gary 70 Jimmy** · 04-08-2011, 08:21 AM

http://www.vintagechevytrucks.com/index2.html

Try this place they should have some used ones.

themb2g · 04-08-2011, 09:17 AM

look for a member "classic bowtie" i was just buying a console from him and he had about 5 extra of those chrome strips.

**70cst** · 04-08-2011, 11:31 PM

Also look up PT70CST He might have one avliable. Good luck

jonesky2 · 04-09-2011, 12:53 AM

Quote:

Originally Posted by 70cst

Also look up PT70CST He might have one avliable. Good luck

thanks everyone for the help.

jonesky2 · 04-09-2011, 12:54 AM

i still have my old one, do you think it would be worth the cost to get it re-chromed? i also have the bowtie that needs attention too.

**70cst** · 04-09-2011, 01:06 AM

Quote:

Originally Posted by jonesky2

i still have my old one, do you think it would be worth the cost to get it re-chromed? i also have the bowtie that needs attention too.

I think that trim is SS...I might be wrong. (It wouldn't be the 1st time

)

Then again maybe it wasn't

jonesky2 · 04-09-2011, 01:22 AM

Quote:

Originally Posted by 70cst

I think that trim is SS...I might be wrong. (It wouldn't be the 1st time

)

Then again maybe it wasn't

i was looking at it and im thinking the same thing, kind of hard to tell on mine because Po painted over it.

themb2g · 04-09-2011, 08:53 AM

try using steel wool to remove the paint/rust.

mustardjimmy71 · 04-09-2011, 12:38 PM

WOAH THERE!!! never use steel wool on satinless. your stainless wont be as corosion resistant. u will get little orange rust specs. just use some metal polish like rim cleaner. just make sure its safe for stainless

jaros44sr · 04-09-2011, 08:09 PM

I don't think it's SS, it would be better if it was. I think it is steel that has been chromed...check out chroming prices, spendy

jonesky2 · 04-13-2011, 01:05 AM

almost done. thanks for the advice

romarti0825 · 04-16-2011, 01:18 AM

Quote:

Originally Posted by mustardjimmy71

WOAH THERE!!! never use steel wool on satinless. your stainless wont be as corosion resistant. u will get little orange rust specs. just use some metal polish like rim cleaner. just make sure its safe for stainless

On the console I got I think somebody tried using steel wool cuz I got the little orange rust specs. What works good getting the rust spots out?
Posted via Mobile Device

jonesky2 · 04-16-2011, 03:03 AM

Quote:

Originally Posted by romarti0825

On the console I got I think somebody tried using steel wool cuz I got the little orange rust specs. What works good getting the rust spots out?
Posted via Mobile Device

I started sanding with 200 and work my way up to 1000 and then polished with some compound. i think it looks great and will work.

BBrendal · 04-16-2011, 07:14 AM

When you striped the console with the Klen Strip what did you use to remove the bubbled off paint without ruining the texture of the bare plastic? I would think a scraper would mess up the texture.

72 Blazer CST · 04-16-2011, 12:25 AM

That looks great! What kind of paint did you use?

jonesky2 · 04-16-2011, 03:01 AM

Quote:

Originally Posted by 72 Blazer CST

That looks great! What kind of paint did you use?

Its SEM color coat Landau Black. I really liked out it turned out, its not to flashy but not too dull. here's the link. http://semproducts.com/Catalog.asp?prod=190

i wish i would have taken before and after pics, the po painted it about three different colors so i used Klean strip to remove the old paint. http://www.kleanstripauto.com

i will post up better pictures with a real camera and not a cell phone.

Big Block · 04-17-2011, 07:37 PM

Very nice! Looks great. Mine is need of a repaint. Thanks for the info.

jonesky2 · 04-17-2011, 09:10 PM

once i find another console with the cup holders i will do a thread with detailed photos and steps

04-05-2011, 11:26 PM	#1
jonesky2 Registered User Join Date: Nov 2009 Location: Hooper Utah Posts: 224	console parts does anybody know were to get the chrome strip that goes all the way around?

04-06-2011, 10:47 PM	#2
jonesky2 Registered User Join Date: Nov 2009 Location: Hooper Utah Posts: 224	Re: console parts in between the red lol

04-07-2011, 08:04 AM	#3
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: console parts The venders should have them. __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

04-07-2011, 11:05 PM	#5
yellow70 Registered User Join Date: Mar 2006 Location: Heber Springs Arkansas Posts: 117	Re: console parts ttt

04-08-2011, 01:27 AM	#6
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,084	Re: console parts I don't think anyone makes that chrome strip, I had looked a while back for my console, and I had to buy a used strip. Got lucky it's in really good conition. Try looking in the parts section or on e-bay for console parts. __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

04-08-2011, 08:21 AM	#7
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: console parts http://www.vintagechevytrucks.com/index2.html Try this place they should have some used ones. __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

04-08-2011, 09:17 AM	#8
themb2g Registered User Join Date: Jul 2010 Location: Portland, Oregon Posts: 411	Re: console parts look for a member "classic bowtie" i was just buying a console from him and he had about 5 extra of those chrome strips.

04-08-2011, 11:31 PM	#9
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: console parts Also look up PT70CST He might have one avliable. Good luck __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! Last edited by 70cst; 04-08-2011 at 11:31 PM.

04-09-2011, 12:54 AM	#11
jonesky2 Registered User Join Date: Nov 2009 Location: Hooper Utah Posts: 224	Re: console parts i still have my old one, do you think it would be worth the cost to get it re-chromed? i also have the bowtie that needs attention too.

04-09-2011, 08:53 AM	#14
themb2g Registered User Join Date: Jul 2010 Location: Portland, Oregon Posts: 411	Re: console parts try using steel wool to remove the paint/rust.

04-09-2011, 12:38 PM	#15
mustardjimmy71 toys'r'us Join Date: Nov 2010 Location: Penticton, BC, Canada Posts: 347	Re: console parts WOAH THERE!!! never use steel wool on satinless. your stainless wont be as corosion resistant. u will get little orange rust specs. just use some metal polish like rim cleaner. just make sure its safe for stainless __________________ 71 jimmy bone stock 350 sm465 33x12.5 rallies 79 caprice landau full load crate350 th350 lowered 20"wires 00 f150 reg cab sb 4x4 5.4L

04-09-2011, 08:09 PM	#16
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,454	Re: console parts I don't think it's SS, it would be better if it was. I think it is steel that has been chromed...check out chroming prices, spendy __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 04-09-2011 at 08:10 PM.

04-13-2011, 01:05 AM	#17
jonesky2 Registered User Join Date: Nov 2009 Location: Hooper Utah Posts: 224	Re: console parts almost done. thanks for the advice Attached Images

04-16-2011, 07:14 AM	#20
BBrendal Recalculating..... Join Date: Nov 2010 Location: New Lenox Il Posts: 686	Re: console parts When you striped the console with the Klen Strip what did you use to remove the bubbled off paint without ruining the texture of the bare plastic? I would think a scraper would mess up the texture. __________________ Brian - (BBrendal) 1969 Chevy Camaro Z28 1972 Chevy Blazer CST 2004 GMC Yukon (The truck that pulls the car trailer) 1972 Chevy Blazer CST #2 (Finished and sold!) Blazer build link... http://s1213.photobucket.com/albums/...rendal/Blazer/ Last edited by BBrendal; 04-16-2011 at 07:14 AM.

04-16-2011, 12:25 AM	#21
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: console parts That looks great! What kind of paint did you use?



Register or Log In To remove these advertisements.

04-17-2011, 07:37 PM	#23
Big Block Big Block Join Date: Mar 2005 Location: Durham, N.C. Posts: 1,649	Re: console parts Very nice! Looks great. Mine is need of a repaint. Thanks for the info.

04-17-2011, 09:10 PM	#24
jonesky2 Registered User Join Date: Nov 2009 Location: Hooper Utah Posts: 224	Re: console parts once i find another console with the cup holders i will do a thread with detailed photos and steps

Register or Log In To remove these advertisements.