wiring in cab, replacement incab harness? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevy2racr · 03-23-2003, 10:34 PM

ok, I drove my truck today, fisttime in a while, the fuel gauge broke over a month ago and I FINANLY got gas and I realized tongiht when I was headed home I'd forgotthe last nigh I drove itno dash lights worked. my dome didnt either. the harness ahs been hacked a bit too. should I jst head to the bone yard and look for an A/C truck and yank the harness or what? what do I need to take to remove the interior harness? if not wat brand is cheap, just an in cab harness andplug and go?

Reumster · 03-23-2003, 10:40 PM

I tell you what I love the front M&H harness I just put in, but the fuse box will be spendy, but well worth the money. Last over 30 years

chevy2racr · 03-24-2003, 02:34 PM

ttt

cdowns · 03-24-2003, 04:09 PM

you actually have 2seperate harnesses 1for the truck 1for theA/C so you can get a regular truck harness for all the lights etc.

Low69CST · 03-24-2003, 04:43 PM

Before you do anyting, check the ground strap on your cab.

03-23-2003, 10:34 PM	#1
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	wiring in cab, replacement incab harness? ok, I drove my truck today, fisttime in a while, the fuel gauge broke over a month ago and I FINANLY got gas and I realized tongiht when I was headed home I'd forgotthe last nigh I drove itno dash lights worked. my dome didnt either. the harness ahs been hacked a bit too. should I jst head to the bone yard and look for an A/C truck and yank the harness or what? what do I need to take to remove the interior harness? if not wat brand is cheap, just an in cab harness andplug and go? __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

03-23-2003, 10:40 PM	#2
Reumster L.E.D. Freak Join Date: Jan 2002 Location: Polson MT Posts: 1,358	I tell you what I love the front M&H harness I just put in, but the fuse box will be spendy, but well worth the money. Last over 30 years __________________ Specializing in Custom L.E.D. inserts. http://www.ccled.com/ Contact me @ blazer2wd1972@hotmail.com (406)675-8082 or Joel @ jmcwaters@eps-corp.net 1972 2wd Blazer, 350/700R4/3:73 posi, err & Custom L.E.D. inserts! LOL

03-24-2003, 02:34 PM	#3
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	ttt __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

03-24-2003, 04:09 PM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	you actually have 2seperate harnesses 1for the truck 1for theA/C so you can get a regular truck harness for all the lights etc. __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

03-24-2003, 04:43 PM	#5
Low69CST Registered User Join Date: May 2000 Location: Frankfort, Kentucky, USA Posts: 2,163	Before you do anyting, check the ground strap on your cab. __________________ '69 CST Short fleetside Lowered, 400 small block, 700R4, 4 wheel disc brakes, front sway bar & rear camaro sway bar (in progress) '87 V10 4x4 Short Fleetside Quad Suspension and Dual Tanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.