KY N.o.s. Door & wing vent glass channel runs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

junkyardjohn · 04-10-2011, 09:29 PM

These are N.O.S. Door & wing vent window channel runs for 73-87 trucks. (it's the weatherstrip that the door glass uses.) There's four pieces... For both doors. The door sides are both pt.#33-9902 & the wing vent sides are 36-9957 & 36-9958. They are flawless show quality. They are still in the G.M. Packaging. I need $85 shipped for these & wont consider them sold until someone says "I'll take em" & will still be for sale until someone does. Thanks john

junkyardjohn · 04-12-2011, 04:37 PM

ttt

f.monroe · 04-12-2011, 05:34 PM

I am interested. can you specify if the same part number were used for the early trucks73-80 as the later trucks81-87? I know the glass is a different thickness. I would need the channel seals for a 76 or 77 truck. If someone can confirm the part numbers above are for the older thicker window glass, I am interested.
Frank

RandyP · 04-12-2011, 08:12 PM

1977
Upper and Side Run Channel, does not show discontinued but my system lies a lot
Lt 339902 $47.28
Rt 339902 $47.28

Division Bar Weatherstrip, does not show discontinued in my system, same story
Lt 369558 $37.26
Rt 369557 $33.34

Helluva buy here Frank. The computer at my house with Mitchell on it is not networked and not online, so I can not give you a screenshot, can do it tomorrow if you want.

JMac11 · 04-12-2011, 08:59 PM

The window thickness thing is confirmed??? So are these for which years??

f.monroe · 04-12-2011, 10:50 PM

It looks like the door glass rubbers for a 77 based on the info above . If i am correct, these run up the glass channel from the rear of the door and terminate at the vent window assy. sealing the back and top side of the door glass? The other trim runs down the backside of the vent window channel and seals the front of the door glass to the rear portion of the vent windo assy? If this is all correct , I will take them . Thanks Randy for the info . A screen shot would be greately appreciated.
Frank

**4X4GMC1972** · 04-12-2011, 10:46 PM

i will take them

**4X4GMC1972** · 04-13-2011, 10:15 AM

I guess the first I will take them doesn't apply for these?

junkyardjohn · 04-13-2011, 11:44 AM

WELL... THIS IS KINDOF A PISSER.. THANKS TO ALL YOU GUYS FOR USING A LITTLE COMMON SENCE & COURTESY. FRANK WILL BE FIRST & THEN 4X4GMC72. SORRY ABOUT THE CONFUSION. FRANK... I'LL P.M. YOU WITH THE INFO.

JOHN

04-10-2011, 09:29 PM	#1
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	N.o.s. Door & wing vent glass channel runs These are N.O.S. Door & wing vent window channel runs for 73-87 trucks. (it's the weatherstrip that the door glass uses.) There's four pieces... For both doors. The door sides are both pt.#33-9902 & the wing vent sides are 36-9957 & 36-9958. They are flawless show quality. They are still in the G.M. Packaging. I need $85 shipped for these & wont consider them sold until someone says "I'll take em" & will still be for sale until someone does. Thanks john Attached Images __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

04-12-2011, 04:37 PM	#2
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	Re: N.o.s. Door & wing vent glass channel runs ttt __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

04-12-2011, 08:12 PM	#4
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: N.o.s. Door & wing vent glass channel runs 1977 Upper and Side Run Channel, does not show discontinued but my system lies a lot Lt 339902 $47.28 Rt 339902 $47.28 Division Bar Weatherstrip, does not show discontinued in my system, same story Lt 369558 $37.26 Rt 369557 $33.34 Helluva buy here Frank. The computer at my house with Mitchell on it is not networked and not online, so I can not give you a screenshot, can do it tomorrow if you want. __________________ *Why is every used 350 sbc out of a corvette?* There's only two things that excite a man, expensive toys and real expensive toys. *VEGETARIAN: That's an old Indian word meaning "I don't hunt so good."* When the going gets tough, switch to power tools. Last edited by RandyP; 04-12-2011 at 08:13 PM.

04-12-2011, 08:59 PM	#5
JMac11 Registered User Join Date: May 2005 Location: Tallahassee Fl Posts: 773	Re: N.o.s. Door & wing vent glass channel runs The window thickness thing is confirmed??? So are these for which years??

04-12-2011, 10:50 PM	#6
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: N.o.s. Door & wing vent glass channel runs It looks like the door glass rubbers for a 77 based on the info above . If i am correct, these run up the glass channel from the rear of the door and terminate at the vent window assy. sealing the back and top side of the door glass? The other trim runs down the backside of the vent window channel and seals the front of the door glass to the rear portion of the vent windo assy? If this is all correct , I will take them . Thanks Randy for the info . A screen shot would be greately appreciated. Frank __________________ Born and proudly residing in a Red State !

04-12-2011, 05:34 PM	#3
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: N.o.s. Door & wing vent glass channel runs I am interested. can you specify if the same part number were used for the early trucks73-80 as the later trucks81-87? I know the glass is a different thickness. I would need the channel seals for a 76 or 77 truck. If someone can confirm the part numbers above are for the older thicker window glass, I am interested. Frank __________________ Born and proudly residing in a Red State !

04-12-2011, 10:46 PM	#7
4X4GMC1972 Registered User Join Date: Apr 2005 Location: Dallas, Texas Posts: 506	Re: N.o.s. Door & wing vent glass channel runs i will take them __________________ 1978 Dodge Omni

04-13-2011, 10:15 AM	#8
4X4GMC1972 Registered User Join Date: Apr 2005 Location: Dallas, Texas Posts: 506	Re: N.o.s. Door & wing vent glass channel runs I guess the first I will take them doesn't apply for these? __________________ 1978 Dodge Omni

04-13-2011, 11:44 AM	#9
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	Re: N.o.s. Door & wing vent glass channel runs WELL... THIS IS KINDOF A PISSER.. THANKS TO ALL YOU GUYS FOR USING A LITTLE COMMON SENCE & COURTESY. FRANK WILL BE FIRST & THEN 4X4GMC72. SORRY ABOUT THE CONFUSION. FRANK... I'LL P.M. YOU WITH THE INFO. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.