TN Parting out 1990 Suburban - The 1947 - Present Chevrolet & GMC Truck Message Board Network

thepenguin99 · 04-15-2011, 03:43 PM

Engine and trans are gone. Truck rally's and tires are going on my truck till I can find what I want. The rest is for sale. Interior is in pretty good shape other than the dash which is cracked to hell and the 3rd row seat is missing. The motor/trans were missing when I got it so I have never had a battery on it to check electric parts.

**ScottH** · 04-15-2011, 04:17 PM

interested in the door carpet strips (just below door panels) for the front doors shipped to 08753. Also how much for steering wheel?

thanks
Scott

ricks2500gmc · 04-15-2011, 08:34 PM

i would be interested in the console if its in good condition and you seperate it from the buckets....

Rick

CORSAIR · 04-15-2011, 09:01 PM

Would be interested in the two (LH/RH) door handle trims shipped to 89048
(Nevada)

Thanks,
CORSAIR

thepenguin99 · 04-16-2011, 04:49 PM

Quote:

Originally Posted by CORSAIR

Would be interested in the two (LH/RH) door handle trims shipped to 89048
(Nevada)

Thanks,
CORSAIR

Completely missed this post when I went out to check parts out today. Will check condition and get back to you with a price later today.

thepenguin99 · 04-16-2011, 04:48 PM

Quote:

Originally Posted by ricks2500gmc

i would be interested in the console if its in good condition and you seperate it from the buckets....

Rick

Console is in pretty good shape other than the chrome part where you put the key in being missing but you can see that in the pic. For now I want to keep it with the seats. If I change my mind I will give you first shot at it.

thepenguin99 · 04-16-2011, 04:46 PM

Quote:

Originally Posted by ScottH

interested in the door carpet strips (just below door panels) for the front doors shipped to 08753. Also how much for steering wheel?

thanks
Scott

I took a closer look at the door carpets today. The drivers side is rougher in person than in the picture. TBH not worth the cost of shipping them probably since new ones aren't that high.

The steering wheel is in good shape 40 + ship on it. I wouldn't expect shipping to be over $10 but I will get an exact quote if you want it.

str8axle55 · 04-15-2011, 09:59 PM

How is the body? Any rust in the rear, barn or gate?

thanks

thepenguin99 · 04-16-2011, 04:51 PM

Quote:

Originally Posted by str8axle55

How is the body? Any rust in the rear, barn or gate?

thanks

Body of the burb is pretty rust free and the back is the gate style. That said, the bottom portion of the gate has dents.

bill2 · 04-16-2011, 12:53 AM

How much for the entire front clip-(hood, fenders, grill support, bumper)

thepenguin99 · 04-16-2011, 04:56 PM

Quote:

Originally Posted by bill2

How much for the entire front clip-(hood, fenders, grill support, bumper)

As you can see in the pics the clip isn't perfect. Specifically, the pass fender has a couple dents you can see in the grille pic at the front. Also in the grille pic you can get a pretty good idea of the grille condition. Chrome is less than stellar and it has a crack which you may or may not be able to see in the pic. All in all the pass fender can be used but isn't great, same for the grille. Drivers fender, hood, bumper, inner fenders, radiator support are all in pretty good shape.

$200 for the whole thing if you can pick it up.

bill2 · 04-16-2011, 12:56 AM

the grill itself too.

K30_dump · 04-16-2011, 09:21 PM

Hello,

31 gallon tank? Not sure how far apart you're willing to go, but I've been looking for a set of Suburban fuel tank crossmembers (for the square style tank). Anything you can do?

Thanks,

Joe
Posted via Mobile Device

**71blksuper4x4** · 04-17-2011, 12:37 AM

how pitted up are the luggage rack ends? The 6 chrome stands that the rack sits on is what I am looking at. Trevor

thepenguin99 · 04-18-2011, 06:59 PM

Quote:

Originally Posted by 71blksuper4x4

how pitted up are the luggage rack ends? The 6 chrome stands that the rack sits on is what I am looking at. Trevor

I glanced at them today while I was pulling parts. They didn't look bad. I will get them off and give you a pic when I make it back out there. Probably tomorrow or the next day. I am trying to get the parts off the truck so I can put pics and prices of specific parts in the thread. The middle stand looks more aluminum than chrome btw. Is that the same as yours?

**71blksuper4x4** · 04-18-2011, 08:09 PM

Quote:

Originally Posted by thepenguin99

I glanced at them today while I was pulling parts. They didn't look bad. I will get them off and give you a pic when I make it back out there. Probably tomorrow or the next day. I am trying to get the parts off the truck so I can put pics and prices of specific parts in the thread. The middle stand looks more aluminum than chrome btw. Is that the same as yours?

Yeah, the middle stand, may be aluminum not real sure. Let me know how bad the pitting is on the ends when you get to them, no big rush. Trevor

thepenguin99 · 04-19-2011, 04:19 PM

Quote:

Originally Posted by 71blksuper4x4

Yeah, the middle stand, may be aluminum not real sure. Let me know how bad the pitting is on the ends when you get to them, no big rush. Trevor

Here are closeups of the front two. They are the worst of them. Not sure if this set is going to be worth the hassle for you tbh unless yours are in pretty poor shape.

EDIT: I just looked at the pics. The chrome has wrinkles in it which is what I was trying to show but the pics are kinda bad and probably make them look worse than they are.

**ScottH** · 04-17-2011, 01:16 PM

Thanks for getting back to me but will pass.

Scott

BLE 'BURBAN · 04-18-2011, 01:09 AM

I'd be interested in the seats/console if you were a bit closer.

iceship · 04-18-2011, 01:38 AM

So what would u be asking for the door pockets....
Posted via Mobile Device

bill2 · 04-18-2011, 02:34 AM

Still waiting on the title for the truck that needs the front clip. I'll pass for now so as not to hold you up but will pm if I get the paperwork.

SBTork · 04-18-2011, 03:06 AM

does this suburban have a factory fuel tank skid plate?

CORSAIR · 04-18-2011, 04:23 PM

I am passing on door panel trims

thanks,
Corsair

SBTork · 04-20-2011, 02:10 PM

Quote:

Originally Posted by SBTork

does this suburban have a factory fuel tank skid plate?

just incase you missed it

thepenguin99 · 04-18-2011, 06:59 PM

Quote:

Originally Posted by iceship

So what would u be asking for the door pockets....
Posted via Mobile Device

They are going with the panels.

04-15-2011, 03:43 PM	#1
thepenguin99 Registered User Join Date: Mar 2004 Location: Millington TN Posts: 435	Parting out 1990 Suburban Engine and trans are gone. Truck rally's and tires are going on my truck till I can find what I want. The rest is for sale. Interior is in pretty good shape other than the dash which is cracked to hell and the 3rd row seat is missing. The motor/trans were missing when I got it so I have never had a battery on it to check electric parts. Last edited by thepenguin99; 04-16-2011 at 01:33 AM.

04-15-2011, 04:17 PM	#2
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting out 1990 Suburban interested in the door carpet strips (just below door panels) for the front doors shipped to 08753. Also how much for steering wheel? thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon Last edited by ScottH; 04-15-2011 at 04:21 PM.

04-15-2011, 08:34 PM	#3
ricks2500gmc Registered User Join Date: Apr 2011 Location: lincoln park,michigan Posts: 53	Re: Parting out 1990 Suburban i would be interested in the console if its in good condition and you seperate it from the buckets.... Rick

04-15-2011, 09:01 PM	#4
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: Parting out 1990 Suburban Would be interested in the two (LH/RH) door handle trims shipped to 89048 (Nevada) Thanks, CORSAIR __________________ "The Can't Family Lives Across The Street"

04-15-2011, 09:59 PM	#8
str8axle55 Registered User Join Date: May 2009 Location: Weymouth Ma Posts: 489	Re: Parting out 1990 Suburban How is the body? Any rust in the rear, barn or gate? thanks __________________ 03 GMC Yukon XL 2500 Quadrasteer, wife`s DD 84 Chevy K30 CC SRW 55 Chevy 210 2dr post

04-16-2011, 12:53 AM	#10
bill2 Registered User Join Date: Mar 2011 Location: Fort Smith, Arkansas Posts: 13	Re: Parting out 1990 Suburban How much for the entire front clip-(hood, fenders, grill support, bumper)

04-16-2011, 12:56 AM	#12
bill2 Registered User Join Date: Mar 2011 Location: Fort Smith, Arkansas Posts: 13	Re: Parting out 1990 Suburban the grill itself too.

04-16-2011, 09:21 PM	#13
K30_dump Registered User Join Date: Oct 2007 Location: Pennsylvania Posts: 164	Re: Parting out 1990 Suburban Hello, 31 gallon tank? Not sure how far apart you're willing to go, but I've been looking for a set of Suburban fuel tank crossmembers (for the square style tank). Anything you can do? Thanks, Joe Posted via Mobile Device

04-17-2011, 12:37 AM	#14
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,152	Re: Parting out 1990 Suburban how pitted up are the luggage rack ends? The 6 chrome stands that the rack sits on is what I am looking at. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

04-17-2011, 01:16 PM	#18
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting out 1990 Suburban Thanks for getting back to me but will pass. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

04-18-2011, 01:09 AM	#19
BLE 'BURBAN In the Forgotten far North. Join Date: Jul 2007 Location: Anchorage, Alaska Posts: 2,627	Re: Parting out 1990 Suburban I'd be interested in the seats/console if you were a bit closer. __________________ 1987 R3500 CREW CAB DUALLY (BIG RED)Acquired 06/12/2015 1990 chevy suburban V2500 5.7L My cluster Mods-Nov 2007 overhead console Stereo install Round 2 Aug 2009 Heated/turn signal mirror upgrade

04-18-2011, 01:38 AM	#20
iceship Registered User Join Date: Apr 2011 Location: bowling green, ky Posts: 439	Re: Parting out 1990 Suburban So what would u be asking for the door pockets.... Posted via Mobile Device

04-18-2011, 02:34 AM	#21
bill2 Registered User Join Date: Mar 2011 Location: Fort Smith, Arkansas Posts: 13	Re: Parting out 1990 Suburban Still waiting on the title for the truck that needs the front clip. I'll pass for now so as not to hold you up but will pm if I get the paperwork.

04-18-2011, 03:06 AM	#22
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: Parting out 1990 Suburban does this suburban have a factory fuel tank skid plate? __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

04-18-2011, 04:23 PM	#23
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: Parting out 1990 Suburban I am passing on door panel trims thanks, Corsair __________________ "The Can't Family Lives Across The Street"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.