OR Parting a couple 67 Chevy trucks

[chrisj930]

Parting out 2 complete 67 chevy small window AC cab trucks
Trucks are in Portland OR - zip 97267
Prices are for pick up - will ship for actual shipping cost if needed

Attached is a partial list, if you need something not listed, please ask

SWB frame with 6 lug front end $250 (no SWB bed available)
3.73 posi coil spring 6-lug rear end $350 (with frame $500)
LWB 3/4 ton frame - straight, coil springs, 8 lug - $400
Complete front clip - very solid $400
6-lug rally wheels with tires - not much tread left $250
Grille (silver one)- ok shape $125
Drivers fender - ok shape $75
Inner fenders - ok shape $25
V8 radiator with shroud - $75
Chrome front bumper with small guards - needs work/driver cond - $75
Bench seat - needs work $75
Gas tank - $50
AC cab with doors, small back window - good shape, solid corners, needs driver rocker panel only - $400
Original stainless windsheild trim from CST - good shape $50
Extra AC parts - compressor, condensor, firewall box - $100
Rusty doors with good glass and one year only chrome vent window trim - $150
Rusty hood - straight but needs front edge repair - $25
Cowl panel - $25
Blue sun visors - excellent shape $50
Blue seat belts - good shape $50
Powerglide trans - need rebuilt $75
TH400 trans - needs rebuilt $150
CST buddy bucket seat - complete, needs covered but foam seems good $600

[too much stuff]

Condition of the glovebox door and lighter assy? Price?

[nds1968]

Can I get a pic of the blue seat belts? Thanks, Nate

[68 IRON]

Chris, I'd like to see pics of the ralleys and radiator w/ shroud. Good lookin' parts truck.

[tampz67@yahoo.com]

In line for the buddy buckets to 77520
Posted via Mobile Device

[tampz67@yahoo.com]

I'll take the seat belts and lighter if they pass
Posted via Mobile Device

[chrisj930]

Originally Posted by tampz67@yahoo.com

In line for the buddy buckets to 77520
Posted via Mobile Device

Right now Tampz67 has the buckets and seatbelts pending payment and shipping details.

[chrisj930]

glove box box door $20
a little bit of surface rust
Lighter - good shape - needs to be cleaned up $20 with socket

[chrisj930]

Seatbelt pics - need some cleanup

[chrisj930]

Tire sizes are 235/70/15 and 205/70/15

Upon second look, I noticed the shroud has a broken tab and the radiator has been repaired as some point. I'd take $50 for them.

[Leroy-B1]

put me in line for the lighter and check on shipping on the buddy buckets to 28787 or Asheville, NC greyhound
Also interested in the chrome bumper w/ bumper guards pending pics and shipping on it
Tell Eric he doesn't need the lighter anyway unless he sales to me...lol

[Newtz67]

Price for the dash bezel with shipping to 95301? Thanks.

[tooter]

I would like a price on steering wheel with horn cap to 39562 Thanks

[tampz67@yahoo.com]

Chris I'll take the buddy buckets lighter and the seat belts to 77520 I'll pay pal u if u pm your info
Posted via Mobile Device

[too much stuff]

I will pass on the glovebox door, but i will take the lighter and socket. Paypal work?
Eric

[chrisj930]

Originally Posted by tooter

I would like a price on steering wheel with horn cap to 39562 Thanks

Wheel has some cracks in it. I think the horn button will clean up nicely.

$45 shipped

[chrisj930]

Originally Posted by Newtz67

Price for the dash bezel with shipping to 95301? Thanks.

Just the bezel? No gauges?

$40 shipped

[DesertCat]

Pics and price of vent window assemblies, a/c controll and cables, and dog dishes please... shipped to 85295

Thanks!

[rcrahn]

I see an auto steering column. Looking for an column with auto and tilt for a project. You mention having 2 trucks, so what is in the other one?

[nds1968]

I'll pass and let tampz get the belts. Thanks for the pics.

[chrisj930]

Originally Posted by rcrahn

I see an auto steering column. Looking for an column with auto and tilt for a project. You mention having 2 trucks, so what is in the other one?

Sorry, neither truck had a tilt.

[chrisj930]

Originally Posted by DesertCat

Pics and price of vent window assemblies, a/c controll and cables, and dog dishes please... shipped to 85295

Thanks!

I'll try to get some good pics tomorrow.

Caps are late model. I assume you're after early parts?

[DesertCat]

Originally Posted by chrisj930

I'll try to get some good pics tomorrow.

Caps are late model. I assume you're after early parts?

I'll pass on the caps (just found some) but the vent windows and a/c parts interested in for sure!

Thanks!

[chrisj930]

Originally Posted by DesertCat

Pics and price of vent window assemblies, a/c controll and cables, and dog dishes please... shipped to 85295

Thanks!

Vent windows are in OK shape for a driver, but I just noticed that the bottom mount studs are broken on both sides. Dont know how easily repairable that is. 100 bucks for the pair + shipping. (dont know how heavy they are yet to get a shipping est)

Heater control is in good shape. 50 bucks including the cables. + shipping.

[DesertCat]

Originally Posted by chrisj930

Vent windows are in OK shape for a driver, but I just noticed that the bottom mount studs are broken on both sides. Dont know how easily repairable that is. 100 bucks for the pair + shipping. (dont know how heavy they are yet to get a shipping est)

Heater control is in good shape. 50 bucks including the cables. + shipping.

Thanks for looking into it, but I'll pass...