Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
04-20-2011, 01:01 PM | #1 |
Registered User
Join Date: Mar 2009
Location: norman okahoma
Posts: 269
|
bedside replacement question.
Can anyone help me out with a link to a thread that would show me how to replace a fleetside bedside?
__________________
The TEAL GMC build thread is HERE 1972 GMC SWB 454 oval ports TH400 fastest 1/4 mile time so far 13.05 @ 104 If you think you have too much horsepower you obviously have a traction problem ! |
04-20-2011, 01:31 PM | #2 |
Registered User
Join Date: Sep 2003
Location: maine
Posts: 191
|
Re: bedside replacement question.
Pretty simple, just did mine.
#1. Reomve bolts from front of head board. 5 or 6. The top 2 are threaded into the head board, rest are 1/2" heads with nut and bolt. #2. Remove carrige bolts along that side from headboard to the wheel well. I find breaking the bolts off works better than trying to remove them. I just get underneath with a impact and sanp them off an then go back with a hammer and punch and knock the rest out. #3. remove the bolts from the wheel well to the bed side. I think there is 6. These are threaded so dont snap these. #4. Now remove the carrige bolts from the back of the wheel well back to the last stake pocket. This leaves the wheel well on the bed. #5. Get under neath and there is 4 bolts 2 with nuts and bolts, 2 that are threaded under the back stake pocket. Take those out #6. Two small welds, one in by the tailgate lower hinge and one on top of the bed floor where it meets the bed side. Cut/grind whatever these #7 Take of the support rod underneath #8, thats it! I just did this last night, not really a big deal |
04-20-2011, 02:15 PM | #3 |
Registered User
Join Date: Mar 2009
Location: norman okahoma
Posts: 269
|
Re: bedside replacement question.
do you have pics of where the welds are?
__________________
The TEAL GMC build thread is HERE 1972 GMC SWB 454 oval ports TH400 fastest 1/4 mile time so far 13.05 @ 104 If you think you have too much horsepower you obviously have a traction problem ! |
04-20-2011, 02:30 PM | #4 |
Registered User
Join Date: Apr 2011
Location: Northern Harford county,Md.
Posts: 41
|
Re: bedside replacement question.
Before you weld it back on,put on your tailgate and set your gaps making sure they look right before welding...
Steve |
04-20-2011, 02:40 PM | #5 |
Registered User
Join Date: Sep 2003
Location: maine
Posts: 191
|
Re: bedside replacement question.
|
04-21-2011, 09:13 AM | #6 |
Registered User
Join Date: Mar 2009
Location: norman okahoma
Posts: 269
|
Re: bedside replacement question.
Thanks Jessechop. I would still like to find a thread with pics.
__________________
The TEAL GMC build thread is HERE 1972 GMC SWB 454 oval ports TH400 fastest 1/4 mile time so far 13.05 @ 104 If you think you have too much horsepower you obviously have a traction problem ! |
04-21-2011, 09:34 AM | #7 |
Registered User
Join Date: Sep 2003
Location: maine
Posts: 191
|
Re: bedside replacement question.
This might help you http://www.classictrucks.com/tech/02...rts/index.html
|
Bookmarks |
|
|