|
03-25-2003, 10:57 PM | #1 |
Registered User
Join Date: Sep 2002
Location: DFW, TX
Posts: 350
|
radio light
I finally got the radio in my '72 to work. The only thing left is the light behind the dial. The truck manual that I have says that the lamp is located at the right rear of the radio. I cannot feel anything back there. Is there a wire attached to the lamp or does it have one of those quarter turn lamp holders? I can see the right side of the radio since I removed the glove box and don't see the lamp there.
Any help would be appreciated! Thanks, Kent
__________________
'56 F-100 (w/all GM stuff) Lookin' for another parts chaser! '05 GMC crew cab |
03-25-2003, 11:29 PM | #2 |
Registered User
Join Date: Oct 2001
Location: SW Washington
Posts: 1,006
|
I'm not sure about the AM/FM Radios. However, if it's an AM Radio, you follow the brown wire that goes around the outside / side of the radio, and goes into a "button" type deal in the back of the radio. Grasp this round metal deally, and pull it straight out the back of the radio. The light bulb is on the end of the "tube like" holder you just pulled out.
Darren
__________________
Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super |
03-26-2003, 12:00 AM | #3 |
Registered User
Join Date: Sep 2002
Location: DFW, TX
Posts: 350
|
Darren,
Thanks for the info. It is an AM radio. Will I have to pull the radio out to get at this light? Thanks for your help, Kent
__________________
'56 F-100 (w/all GM stuff) Lookin' for another parts chaser! '05 GMC crew cab |
03-26-2003, 10:01 PM | #4 |
Registered User
Join Date: Oct 2001
Location: SW Washington
Posts: 1,006
|
fatfords,
Honestly, I'm not sure. I'm just getting into this truck thing, and my 67 didn't have a radio in it. I just bought one (A Radio). It is on my workbench right now. I was cleaning up the radio when I noticed this light thing. You can probably change the bulb with the radio in the dash. You will just have to lay on your back, and try to reach up behind the heater and radio to do it. Maybe it's helpful to have a flashlight and one of those mirrors on the end of an extendable rod to see what your goal is. Good luck. Darren
__________________
Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super |
Bookmarks |
|
|