|
|
|
04-28-2011, 10:28 PM
|
#1 |
|
Registered User
Join Date: Jul 2007
Location: Salina, Kansas
Posts: 1,998
|
massive problem
truck only starts if u sit there and crank and crank and crank.. then it will sputter and shoot gas outta the carb.. so i then rebuilt carb.. then it sputters more so i restabbed distributor so then now it wont even start after i shut it off.... had it running once after i restabbed distributor.... so what do i do next? plugs?
__________________
1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796 |
|
|
|
04-28-2011, 11:36 PM
|
#2 |
|
VA72C10
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,267
|
Re: massive problem
you sure the distributor was at correct tdc? And what timing are you running? Also, have you verified the plug placement is correct?
__________________
Looking for a 67-72 swb or blazer project in or around VA. 
|
|
|
|
|
04-29-2011, 01:03 AM
|
#3 |
|
Registered User
Join Date: Jan 2011
Location: Redmond, OR
Posts: 763
|
Re: massive problem
Sounds like something is seriously messed up with your timing. Any chance the timing chain skipped a tooth?
Was it running ok before/how long ago? If it is a points distributor, I lost condenser once and it caused it to backfire to the point I destroyed my exhaust system. The flashes coming out from under the hood were impressive too.
__________________
68 Chev C20- son has it now 83 K20 - bought from son 70 C20 - in progress Last edited by dmack91; 04-29-2011 at 01:06 AM. |
|
|
|
|
04-29-2011, 01:05 AM
|
#4 |
|
Registered User
Join Date: Jan 2011
Location: Redmond, OR
Posts: 763
|
Re: massive problem
double tap
__________________
68 Chev C20- son has it now 83 K20 - bought from son 70 C20 - in progress Last edited by dmack91; 04-29-2011 at 01:05 AM. |
|
|
|
|
04-29-2011, 01:06 AM
|
#5 |
|
Registered User
Join Date: Apr 2011
Location: Hesperia Ca
Posts: 52
|
Re: massive problem
points or hei?
__________________
70 c10 long bed 57 chevy 2 door wagon 07 tahoe 96 civic commuter |
|
|
|
|
04-29-2011, 01:15 AM
|
#6 |
|
Registered User
Join Date: Apr 2011
Location: Pacoima California
Posts: 19
|
Re: massive problem
Sounds like your timing is of or your wire’s are wrong double check your firing order and reset your distributor where there is compression on the Number one cylinder…Hope this will help you..
|
|
|
|
|
04-29-2011, 05:18 AM
|
#7 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: massive problem
makin sure of TDC un compression stroke s a must when installing dizzy
points gap or dwell MUST be set after cleaning checking points in dizzy
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
