![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: May 2011
Location: stafford,CT
Posts: 30
|
67 c10 with 5 speed s10 tranny questions
i have a 67 c10 that i am putting a 292 straight 6 in and i think it would be nice with a 5 speed s10 tranny. I am wondering what years s10s' had five speeds and what the compatibility would be. Any information or input would be great guys!
![]() |
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Mar 2011
Location: Valley of the Sunstroke, Arizona
Posts: 1,210
|
Re: 67 c10 with 5 speed s10 tranny questions
Check the FAQ area, under engines IIRC. There are a couple very good write ups on just that.
__________________
My build thread - Devastation and Reform http://67-72chevytrucks.com/vboard/s...d.php?t=567131 |
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Mar 2011
Location: Valley of the Sunstroke, Arizona
Posts: 1,210
|
Re: 67 c10 with 5 speed s10 tranny questions
__________________
My build thread - Devastation and Reform http://67-72chevytrucks.com/vboard/s...d.php?t=567131 |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: May 2011
Location: stafford,CT
Posts: 30
|
Re: 67 c10 with 5 speed s10 tranny questions
thanks for the link. to day we picked up a 79 c10 parts truck. the plan is to use the front crossmember and swap it so i will have power steering,disk brakes, and five bolt lug pattern. put it this way i have my work cut out for me this month!!
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: May 2011
Location: Mayflower,AR
Posts: 802
|
Re: 67 c10 with 5 speed s10 tranny questions
look for the "square body" s10 5spd or an 80's camaro, the square body also. i dont know much about the round body s10s, but i do know that the square body 5spd is called a t5 and all you need is an old manual trans bell housing for it and it will bolt up. i was looking at buying a friends t5 out of his 86 s10 and putting it in the 71 elcamino i used to have and make it a "pro touring" car.
__________________
-Mike- '94 GMT 400 ext z71 3" body, 3 in rough country, hd mirrors, 20" motometals on 35s |
![]() |
![]() |
![]() |
#6 |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,477
|
Re: 67 c10 with 5 speed s10 tranny questions
-
I installed one in my '67 with a 250 6 cyl. I love it... My '67 had a 4 speed from the factory. Here is a decent thread on the swap. http://67-72chevytrucks.com/vboard/s...d.php?t=434512 LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 05-08-2011 at 10:50 PM. |
![]() |
![]() |
![]() |
#7 |
Cool Truck
Join Date: Dec 2008
Location: Bowie,MD
Posts: 1,869
|
Re: 67 c10 with 5 speed s10 tranny questions
I've got a 68 C20 with a 292 and an 83 Camaro T5 in mine that works great. When I got the truck, it had a 1980 Camaro Saginaw 4 speed. To run the Camaro transmissions you will probably need bucket seats do to the shifter location.
__________________
1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Oct 2008
Location: Marianna Arkansas
Posts: 7,269
|
Re: 67 c10 with 5 speed s10 tranny questions
you would want the 4.3 model the years for those started in mid year 88 and stayed in till the end of production run 03 [04 s10's were built but they were 4wd]. The earlier 5 speed would be from the 2.8 engine and the bellhousing from a 305 camaro would work. but I would stay with the one from the 4.3 as it was a light duty truck trans basicly the same as in the 1/2 ton 5 speed trucks[fullsize] from 88-07 with a few changes.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|