![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: May 2011
Location: Fort worth
Posts: 1
|
Low 71 c10 needs perty wheels
I have a 71 c-10 swb that I am putting a djm 5-5 static drop kit on. It has tubular upper and lower control arms and a drop spring front and rear. I want to put on some boss 338 wheels. Was thinking about 18x8.5 in front and 20x10 rear. Any idea if this will fit with the lowering kit? Anybody know what the back spacing would be on that? Thanks for your help.
Posted via Mobile Device |
![]() |
![]() |
![]() |
#2 |
VA72C10
![]() Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: Low 71 c10 needs perty wheels
Welcome to the board!
the 5" in the front will mean you have to be real careful with the backspace and also the tire size. Should be fine in the rear. Don't have the backspaces available handy...but I do know the boss wheels require modification to fit our trucks.... do a search on here for boss wheels and you'll get lots of info and pics...
__________________
Looking for a 67-72 swb or blazer project in or around VA. ![]() |
![]() |
![]() |
![]() |
Bookmarks |
|
|