![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Apr 2010
Location: Boise, ID
Posts: 1,280
|
What tools do I need to...
Take off the side of the bed. See, I found a 68 that has almost pristine bed-sides and I can get tem for 75 bucks a piece. I am ssuming 9/16 to 5/8's but what else will I need. I have never pulled the bedsides off before. Thanks!
Last edited by ubtripn; 05-13-2011 at 01:05 PM. |
![]() |
![]() |
![]() |
#2 |
Moderator
![]() Join Date: May 2007
Location: Southern Cal
Posts: 20,005
|
Re: What tools do I need to...
a cutoff wheel. there are 2 small spot welds at the back by where the tailgate mounts.
__________________
1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Apr 2010
Location: Boise, ID
Posts: 1,280
|
Re: What tools do I need to...
yikes, no outlets, better look for a battery powered one, would a metal chisel and hammer do it without damaging anything?
Last edited by ubtripn; 05-13-2011 at 01:22 PM. |
![]() |
![]() |
![]() |
#4 |
Project Junkie! Fishing Poor!!
![]() Join Date: Dec 1999
Location: Olympia,Wa. 98512
Posts: 10,770
|
Re: What tools do I need to...
You will also need 1/2" wrench. 1/2" Socket, and wrench, Large Phillips screwdriver, and possibly a toarch. WES
__________________
On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys |
![]() |
![]() |
![]() |
#5 |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,515
|
Re: What tools do I need to...
-
I found taking mine off that once you started loosening the nuts the carriage type bolts wanted to turn in the holes. Be sure and spray the threads with penetrating oil. It also helps if you clean the threads with a small wire brush after spraying them the first time, then spray them again. Yes, I know it is a pain in the arse, but it really helps in getting them off. Also, have someone in the bed holding down on the bolt heads. I have found that pushing down on the bolt heads with the handle of large hammer works well and it is easy to hang on to. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
![]() |
![]() |
![]() |
#6 |
Moderator
![]() Join Date: May 2007
Location: Southern Cal
Posts: 20,005
|
Re: What tools do I need to...
I suppose you could try that too.
__________________
1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Apr 2010
Location: Boise, ID
Posts: 1,280
|
Re: What tools do I need to...
Got it, thanks! Is the torch for the spot welds to heat up and then break?
|
![]() |
![]() |
![]() |
#8 |
Moderator
![]() Join Date: May 2007
Location: Southern Cal
Posts: 20,005
|
Re: What tools do I need to...
Instead of trying to loosen up the old bolts, just over-tighten and snap them off. Quick and easy.
__________________
1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man |
![]() |
![]() |
![]() |
#9 | |
Redefining LowBudget
Join Date: Mar 2009
Location: lebanon Cow Hampshire
Posts: 4,538
|
Re: What tools do I need to...
Quote:
take the wheel tub too the bolts that hold it to the bed are threaded into the bed side if you break one you'll be making more work for yourself... I would go for the hole bed too depending on your relationship with the yard they make let you take it home strip it and bring back your old stuff....a junk bed is better than no bed
__________________
1970 C10 CST fleetside 472 ....big dreams little cash... SunShine Syndicate.. ![]() Mikes Sandwich Fair Run OCT 8th 2011
|
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Apr 2010
Location: Boise, ID
Posts: 1,280
|
Re: What tools do I need to...
Thanks for the advise all, I really appreciate it!
|
![]() |
![]() |
![]() |
#11 |
Project Junkie! Fishing Poor!!
![]() Join Date: Dec 1999
Location: Olympia,Wa. 98512
Posts: 10,770
|
Re: What tools do I need to...
The toarch is for cutting the nuts off on the bolts that will ultimately spin on you.
![]()
__________________
On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Sep 2003
Location: maine
Posts: 191
|
Re: What tools do I need to...
do a search on here, I recently typed it out pretty good for a guy on how to do it
|
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Sep 2003
Location: maine
Posts: 191
|
Re: What tools do I need to...
|
![]() |
![]() |
![]() |
#14 | |
VA72C10
![]() Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: What tools do I need to...
Quote:
__________________
Looking for a 67-72 swb or blazer project in or around VA. ![]() |
|
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Apr 2010
Location: Boise, ID
Posts: 1,280
|
Re: What tools do I need to...
awesome, thanks!
|
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Nov 2009
Location: maine
Posts: 2,315
|
Re: What tools do I need to...
Y not buy the whole bed?
Posted via Mobile Device
__________________
1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd. |
![]() |
![]() |
![]() |
#17 |
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: What tools do I need to...
A cordless drill may be an easier find and should drill out the spot welds.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Apr 2010
Location: Boise, ID
Posts: 1,280
|
Re: What tools do I need to...
A drill I have. It is in a junkyard or I would go for the whole bed. Well, maybe I still will, they have cheap pices. Found an original general motors horncap in the cab, great chrome condiion (if chrome is what they used.) tghe guy asked me if it was a gascap, got it for 3 bucks.
|
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Apr 2010
Location: Boise, ID
Posts: 1,280
|
Re: What tools do I need to...
good idea or I could bring the whole bed/differential home, swap out my panels and have a matching trailer!
Last edited by ubtripn; 05-14-2011 at 09:27 AM. |
![]() |
![]() |
![]() |
Bookmarks |
|
|