Please help I need headers for my 1971 c10 with pro comp angle plugs

[FLAKO]

Hi I need headers for angle plugs and I can't find ones that will fit I have pro comp heads and yea I know I xxck up but I want a 3" collector any body have angle plugs and what headers u guys using please I'm almost don't with my frame off restoration and this is holding me up any suggestions and pic would be greatly appreciated thanks again guys...
Posted via Mobile Device

[landsurvey1]

Have you taken a look at the Hooker Super Competition block hugger headers? They are pricey at $420.00 a set on Summits web sight.

[bigsnookmaster]

I run Hooker Super Comps on my 406 with Victor Jr angle plugs, with no problems. #5 is a little tight, and I did have to do a slight notch on the pass side of the frame. I think it was the pass side. Iv'e had them for a while, with no problems. If your'e going to get coated headers, I suggest to get them painted, blast them, and have them coated local if you can. I bought mine coated and they didn't last a year or so. I had them done again local, and they have lasted for 5 years or so now. Good luck

[FLAKO]

Hey guys I picked up some shortys I think there SS jba there pretty good some frame work but they cleared the heads and there a 3" thanks guys for the help I will be upgrading to hooker super comp when I finish the build and can take some fresh air
Posted via Mobile Device

[FLAKO]

I'll post some pic tomorrow guys
Posted via Mobile Device