![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Senior Member
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
|
2 bbl carb screw needed
I need one of the round headed (flat screwdriver) screws that holds a 2 bbl carb together. I have a 67 with a 292, and one of the four screws fell out. Does anyone have one of these screws?
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. |
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Jul 2001
Location: Wellington, Ks
Posts: 10,188
|
Re: 2 bbl carb screw needed
I "might" have one if you can post a pic with length and diameter sizes. Have several carb parts laying in a box, not sure what they came from. No promises but will look if I know what I'm looking for. Yours for postage if I have it.
__________________
1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
|
Re: 2 bbl carb screw needed
I believe the bolt size is #12 and the thread count is 28 TPI.
From the bottom of the head to the end of the bolt it is about 15/16" long. The head is a little more about 3/16" thick. Total bolt length including head is about 1 1/8". Here is a picture
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
|
Re: 2 bbl carb screw needed
I tired the local farm supply store and they have NOTHING in a #12-28. I found a #12 once and is was a #12-24.
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. |
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() Join Date: Jul 2001
Location: Wellington, Ks
Posts: 10,188
|
Re: 2 bbl carb screw needed
Thanks for the info on the carb screw, makes it easier to look for something when I know what I'm looking for.
![]()
__________________
1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks |
![]() |
![]() |
![]() |
#6 |
Senior Member
![]() Join Date: Jul 2001
Location: Wellington, Ks
Posts: 10,188
|
Re: 2 bbl carb screw needed
Sorry but can't help on this one. Checked all the odd carb screws I have and all are either too short or too long. 3/4 " and 1 5/16" in length.
__________________
1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
|
Re: 2 bbl carb screw needed
Thanks for checking, I appreciate it. I will keep looking.
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. |
![]() |
![]() |
![]() |
Bookmarks |
|
|