Captain America 68 short/fleetside

[gottattooz]

Well, after being a member for 3 years with nothing to contribute, I finally dragged home my "dream truck", a 1968 Chevy Shortbed Fleetside. I"ve loved the bodystyle for a very long time, and found someone who'd trade me even up for my old 1994 S-10 Blazer with a SBC. I"ll do my best to use the search function before asked redundant questions about things that I"m sure have been covered hundreds of times.
Currently, the truck has a 250 inline 6 and supposedly a Muncie 4 speed, set in, but neither are hooked up. MY plan was to run the drivetrain as is, and work on making it a safe and dependable truck before bothering to swap out the drivetrain. However, I know very little about the engine, and even less about the trans. I don't even know if I have all the parts to make it roadworthy. Time will tell.
Now, the bad news. The guy I traded to painted the truck himself, red, white and blue. Doesn't sound too awful until you see what he did to the clearcoat. I kid you not, the guy clearcoated the truck, and then threw glitter all over it. I don't mean put glitter in the clear and sprayed it evenly. He threw it on the truck like he was feeding chickens!!! There's mailbox numbers screwed to the hood, Tiger-print cloth all over the dashboard and doorpanels, and probably a slew of problems I have yet to discover.
Anyways, looking forward to gathering as much info and knowledge as I can.

-Josh

[classicchev]

As long as is what you want, how cares how ugly it is, just makes it easier to remove tha paint without felling bad.

Have fun,

Darren

[Papa-J]

Congratz. The red white and blue didn't look to bad, but the glitter, thats rough, i didn't notice till i read that part, i thought it was just dirty in the first pic, lol. Good luck on fixing her up and be sure to post pics. oh and by the way you gotta post some interior pics, im dieing to see the print interior

[gottattooz]

Originally Posted by Papa-J

Congratz. The red white and blue didn't look to bad, but the glitter, thats rough, i didn't notice till i read that part, i thought it was just dirty in the first pic, lol. Good luck on fixing her up and be sure to post pics. oh and by the way you gotta post some interior pics, im dieing to see the print interior

I'll be sure to get interior pics tomorrow, just for you. MY wife laughed when I opened the door. You'll see!!

-Josh

[gixxerpymp]

Hey neighbor! Looking forward to seeing your build.

[gottattooz]

Originally Posted by gixxerpymp

Hey neighbor! Looking forward to seeing your build.

Thanks! Hopefully I"ll have it roadworthy before I know it.

-Josh

[VA72C10]

Looking forward to how you fix it up.

[67chevy1series]

looks like a victim of a poor restoration i hope you fix her up!

[heeroyue2002]

want to see how this turns out.

[bruceman1968]

Josh, When you said the PO threw glitter on like he was feeding chickens, I laughed so hard. That was funny man!
Your truck is a good one. Doesn't seem to have dents or rust, so when you get the interior replaced and exterior painted that's gonna be one fine truck, for sure!!

I am looking forward to watching your progress....

Bruce

[FL71C10]

Looks like a good truck to start with. I like the 6 cyl 4 speed combo.

[propanemudtruck]

Originally Posted by FL71C10

Looks like a good truck to start with. I like the 6 cyl 4 speed combo.

x2

It's a pretty original paint job, I say if you like it maybe try to wetsand through the clear for a weathered look

[gottattooz]

The Tiger Print interior.

-Josh

[VA72C10]

The seat is kind of cool......

[CHICKENTRUCK]

Boy,that must have been one nice blazer you had.lol

[bruceman1968]

Josh,
That seat has potential. I bet it cleans up nice and will look good man.

[gottattooz]

Originally Posted by CHICKENTRUCK

Boy,that must have been one nice blazer you had.lol

I bought the blazer for $900 with a blown 4.3 v6. I stuck in a 0.040 over 350 with Vortec heads. It's got a stout 700R4, and it's been a good truck. The only down side is that it's an S-10. If I rob all the parts I want, it'll have the 350 with the Serpentine setup, possible power windows and locks, tilt wheel, maybe the buckets and center console, etc. We'll see.

FRENCHBLUE72, polishing the wheels is on my very near to-do list

bruceman1968, it looks like someone stuffed a couch pillow under the seat cover on the driver's side. I"ll see if it's salvageable.

m6z, the Tiger PRint is currently lookin for a new home.

-Josh

[bollybib]

looks like a bicentennial truck.,,.but really,,,even with all that bad makeup i can see a fine lookin truck

[m6z]

looks like a good start. You're keeping the tiger print right? lol j/k.

[wh1skea]

Makes me think more Evel Knievel than Capt America. Either way, good luck!

[FRENCHBLUE72]

Looks like she needs just a little bit of help... Need to polish out the rest of the slots..

[69ROTROD]

Looks like a decent platform to start a nice build... I will say the interior is an epic fail. LOL

[72freak]

Id make it mechanically sound and leave it alone!!! That thing is awsome!

[bollybib]

Originally Posted by 72freak

Id make it mechanically sound and leave it alone!!! That thing is awsome!

ya drive it like it is, tiger !

[Papa-J]

haha, that tiger print is more horrible then i thought it would be, but that bench seat if i can be fixed seems nice, Im interested to see what direction you take this in.