CA WTB: stock six lug wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oem4me · 06-27-2011, 08:29 PM

Need some stock 15x5.5 six lugs and skinny whites for occasional show use. preferably little rust or damage. PM me if ya got the tires and/or the wheels and let me know what you want for 'em.

geezer#99 · 06-28-2011, 09:55 AM

Pm sent.

oem4me · 06-28-2011, 01:02 PM

Thanks for the quick response and outstanding offer, but shipping from Canada may be a killer. Hopefully someone a little closer to home will come forward. I'll wait and see. stay tuned.

geezer#99 · 06-28-2011, 01:32 PM

Pm slepysal. He was looking too. He found some I think. He might know a source.
He's in San Jose I think.

Blue Heeler · 06-28-2011, 10:29 PM

Quote:

Originally Posted by oem4me

Need some stock 15x5.5 six lugs and skinny whites for occasional show use. preferably little rust or damage. PM me if ya got the tires and/or the wheels and let me know what you want for 'em.

I have some 4- 16's with tires?

oem4me · 06-29-2011, 12:14 AM

thanks, but I'm going OE, 15x5.5. I could settle for 15x6 if I had to.

62ShortStep · 07-11-2011, 10:47 PM

Quote:

Originally Posted by oem4me

thanks, but I'm going OE, 15x5.5. I could settle for 15x6 if I had to.

oem4 me- You have the nicest trucks on this site, no lie.
I have one 15x5.5 6-lug stock rim available. It was on my truck, but I changed to 15x5 (1962), and this rim is now left over.
Some scratches from hanging from the spare tire bracket.
Located in Fountain Valley, Orange County
Gus

oem4me · 07-13-2011, 12:50 AM

Quote:

Originally Posted by 62ShortStep

oem4 me- You have the nicest trucks on this site, no lie.
I have one 15x5.5 6-lug stock rim available. It was on my truck, but I changed to 15x5 (1962), and this rim is now left over.
Some scratches from hanging from the spare tire bracket.
Located in Fountain Valley, Orange County
Gus

Thanks very much. I appreciate your compliment.
Chances are good the wheels I get will need to be blasted clean anyway, so scratches are of minimal concern. In my mind, these wheels are not rare and should not be too hard to find a full set somewhere fairly local (saves shipping costs). I had a very nice OG paint set awhile back and tried for years to give em away but never found any takers. Now, damned if I can find but one or two odd wheels. I'll acquire them one at a time if need be, but for now I'd like to see if a set turns up. So, don't toss em just yet, gimmie some time.
Thanks again

1964c-10 · 07-13-2011, 01:53 AM

ive got 5 rims

would like $10 each

if i am too far away i understand

Wrenchbender Ret · 07-12-2011, 04:24 PM

I have one 5 1/2 & one 6 in. Very clean.
georgec2434@yahoo.com

jonzcustomshop · 07-13-2011, 12:15 AM

I am going to have a match set of 1963 wheels (4) available from a build I am doing,,, 15, not sure the width

oldblue1968chevy · 07-18-2011, 05:45 PM

I have a 6 lug steel wheel very skinny probably like 6" wide or something. dunno bS or anything.

Is it what your lookin for

oem4me · 07-18-2011, 09:47 PM

It could be what I'm looking for... but I'm after a whole set, and I think I'm gonna hold out and find some local to save the hassle and expense of shipping. Just gotta be patient, I guess.

oldblue1968chevy · 07-18-2011, 09:48 PM

I understand shipping would be nuts

geezer#99 · 07-18-2011, 10:15 PM

Here's a lead for you.

http://losangeles.craigslist.org/lac...499235540.html

oem4me · 07-18-2011, 11:45 PM

Called 'em. No gots.

geezer#99 · 07-18-2011, 11:59 PM

I got the link from here. Search a bit. Might get lucky.

http://www.stovebolt.com/ubbthreads/...483#Post763483

Driveway Dreams · 07-19-2011, 11:43 PM

Go to car-part.com (a used parts search website that we use all the time in the body shop). I just searched for a 1964 Chevy Truck, search by distance from 91522, search for a 15x5.5 wheel (it was that or a 16x5), quite a few turned up. There is a place in Grand Junction, CO that looks to have a matching set from a 65. Call the places on there and they should be able to quote you shipping to you. That is what these places do. You may even be able to haggle some. I would just ask for pictures.

kieth · 07-20-2011, 05:16 PM

Quote:

Originally Posted by oem4me

Need some stock 15x5.5 six lugs and skinny whites for occasional show use. preferably little rust or damage. PM me if ya got the tires and/or the wheels and let me know what you want for 'em.

Since these wheels were not in vogue a few years back they went to the crusher with all the other 66, 64, 65, 63, 62, 61 trucks......that is why you do not see them in the salvages. I know someone who has a whole lot full of them, but they are in Tulsa, Oklahoma Kennys trucks
918-827-2600

kieth · 07-20-2011, 05:22 PM

I checked on fed x ground 16 x 16x 6 10 lbs weight 20.00 value the price is $12.81 each Tulsa, to california, it is to a business address (which is cheaper)

oem4me · 07-21-2011, 01:14 AM

Thanks Kieth, I'm lookin into it.

Caudillo64 · 07-22-2011, 08:17 PM

I have a set of 15' baby moons on craigslist. lhttp://fresno.craigslist.org/pts/2503163196.html

perro13 · 07-25-2011, 10:22 PM

15 with the clips? i have a set not sure on the width. i'll be in Whittier on friday in case they work for you. i'll measure tomorrow.
Randy (209) 639-1281

oem4me · 07-26-2011, 12:46 AM

Quote:

Originally Posted by perro13

15 with the clips? i have a set not sure on the width. i'll be in Whittier on friday in case they work for you. i'll measure tomorrow.
Randy (209) 639-1281

Dang! So close, but I need nubs as opposed to the clips. Thanks though for the offer to bring them within reach.

perro13 · 07-26-2011, 01:27 AM

i might have 2 in Whittier. just need to make sure on the width. just sent a 62 subdown.
Randy

06-27-2011, 08:29 PM	#1
oem4me Registered User Join Date: Aug 2010 Location: Burbank CA Posts: 3,055	WTB: stock six lug wheels Need some stock 15x5.5 six lugs and skinny whites for occasional show use. preferably little rust or damage. PM me if ya got the tires and/or the wheels and let me know what you want for 'em. Last edited by oem4me; 06-27-2011 at 08:31 PM.

06-28-2011, 09:55 AM	#2
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,732	Re: WTB: stock six lug wheels Pm sent.

06-28-2011, 01:02 PM	#3
oem4me Registered User Join Date: Aug 2010 Location: Burbank CA Posts: 3,055	Re: WTB: stock six lug wheels Thanks for the quick response and outstanding offer, but shipping from Canada may be a killer. Hopefully someone a little closer to home will come forward. I'll wait and see. stay tuned.

06-28-2011, 01:32 PM	#4
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,732	Re: WTB: stock six lug wheels Pm slepysal. He was looking too. He found some I think. He might know a source. He's in San Jose I think. Last edited by geezer#99; 06-28-2011 at 02:57 PM.

06-29-2011, 12:14 AM	#6
oem4me Registered User Join Date: Aug 2010 Location: Burbank CA Posts: 3,055	Re: WTB: stock six lug wheels thanks, but I'm going OE, 15x5.5. I could settle for 15x6 if I had to.

07-13-2011, 01:53 AM	#9
1964c-10 Registered User Join Date: Nov 2010 Location: State Center, IA Posts: 212	Re: WTB: stock six lug wheels ive got 5 rims would like $10 each if i am too far away i understand __________________ 2003 Serria K1500 1998 Camaro 1964 C10 long fleetside bed, small back window, 3 on the tree 1964 C20 custom cab, long fleetside bed, big back window, 4 on the floor Disclaimer- anything posted is only based on my personal experience, opinions, and advice given by others. There are no implied or written warranties or guarantees with anything posted on this website.

07-12-2011, 04:24 PM	#10
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,229	Re: WTB: stock six lug wheels I have one 5 1/2 & one 6 in. Very clean. georgec2434@yahoo.com

07-13-2011, 12:15 AM	#11
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: WTB: stock six lug wheels I am going to have a match set of 1963 wheels (4) available from a build I am doing,,, 15, not sure the width __________________ 60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955

07-18-2011, 05:45 PM	#12
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: WTB: stock six lug wheels I have a 6 lug steel wheel very skinny probably like 6" wide or something. dunno bS or anything. Is it what your lookin for __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

07-18-2011, 09:47 PM	#13
oem4me Registered User Join Date: Aug 2010 Location: Burbank CA Posts: 3,055	Re: WTB: stock six lug wheels It could be what I'm looking for... but I'm after a whole set, and I think I'm gonna hold out and find some local to save the hassle and expense of shipping. Just gotta be patient, I guess.

07-18-2011, 09:48 PM	#14
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: WTB: stock six lug wheels I understand shipping would be nuts __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

07-18-2011, 10:15 PM	#15
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,732	Re: WTB: stock six lug wheels Here's a lead for you. http://losangeles.craigslist.org/lac...499235540.html

07-18-2011, 11:45 PM	#16
oem4me Registered User Join Date: Aug 2010 Location: Burbank CA Posts: 3,055	Re: WTB: stock six lug wheels Called 'em. No gots.

07-18-2011, 11:59 PM	#17
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,732	Re: WTB: stock six lug wheels I got the link from here. Search a bit. Might get lucky. http://www.stovebolt.com/ubbthreads/...483#Post763483

07-19-2011, 11:43 PM	#18
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: WTB: stock six lug wheels Go to car-part.com (a used parts search website that we use all the time in the body shop). I just searched for a 1964 Chevy Truck, search by distance from 91522, search for a 15x5.5 wheel (it was that or a 16x5), quite a few turned up. There is a place in Grand Junction, CO that looks to have a matching set from a 65. Call the places on there and they should be able to quote you shipping to you. That is what these places do. You may even be able to haggle some. I would just ask for pictures. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.



Register or Log In To remove these advertisements.

07-20-2011, 05:22 PM	#20
kieth Registered User Join Date: Sep 2010 Location: Tulsa, Oklahoma Posts: 1,925	Re: WTB: stock six lug wheels I checked on fed x ground 16 x 16x 6 10 lbs weight 20.00 value the price is $12.81 each Tulsa, to california, it is to a business address (which is cheaper)

07-21-2011, 01:14 AM	#21
oem4me Registered User Join Date: Aug 2010 Location: Burbank CA Posts: 3,055	Re: WTB: stock six lug wheels Thanks Kieth, I'm lookin into it.

07-22-2011, 08:17 PM	#22
Caudillo64 Registered User Join Date: Jul 2011 Location: Fresno, Ca Posts: 365	Re: WTB: stock six lug wheels I have a set of 15' baby moons on craigslist. lhttp://fresno.craigslist.org/pts/2503163196.html

07-25-2011, 10:22 PM	#23
perro13 Registered User Join Date: Dec 2008 Location: Stockton CA Posts: 2,364	Re: WTB: stock six lug wheels 15 with the clips? i have a set not sure on the width. i'll be in Whittier on friday in case they work for you. i'll measure tomorrow. Randy (209) 639-1281

07-26-2011, 01:27 AM	#25
perro13 Registered User Join Date: Dec 2008 Location: Stockton CA Posts: 2,364	Re: WTB: stock six lug wheels i might have 2 in Whittier. just need to make sure on the width. just sent a 62 subdown. Randy

Register or Log In To remove these advertisements.