Mexican made Crate Motors?

[FLDBRED]

My son has been looking for a new crate motor,GM has some great combo's for a fair price.The fact that they are made in Mexico kinda bothers us,after all the reason we love these old trucks and muscle cars is because they are a part of America. Should we let this stop us from buying one? How do you guys feel about this?

[68gmsee]

I agree with the made in America thing but in reality we're already inundated with parts not made in the United States.

Personally, I don't know about the quality of these engines but there are a lot of engines out there that one can buy and have rebuilt. No guarantee that they will use all made in America parts, though.

[cdowns]

not a thing wrong with the crate motors sold by GM

most all are using cheeeep skippy chinese parts to finish them out anyway

[Kidd-7]

I would not but it, unless there was just absolutely no American made crates available. I buy everything I can in America; nothing against foreign people or imports per se, but the quality from Mexico & China generally suck. Aside from that they are made in sweat shops; I won't support abusing people just so I can save a buck. The biggest reason though, if Americans don't made stuff here then we don't work. I'll pay a little extra if need be so my neighbor has a job.
Sorry 'bout the rant here, but I believe strongly in buying American.

[DeputyDan]

I thought about going the crate motor route but decided to take a stab at rebuilding my own. I will tell you what I learned was invaluable. I now know how every component of my engine works and how to tear it down and rebuild it. Besides that I had many nights of good friendship and beer drinking to attribute to rebuilding the engine. As far as American made this was one way to ensure everything was made in the U.S. and having a old GM block machined was a way to ensure you have a U.S. made block. Besides that I found out I actually had a 4 bolt main which most crates charge extra for. If you go the GM route at least you get peace of mind through warranty. As for other engine builders I don't trust their parts for the prices they state.

[bobs409]

Originally Posted by DDixon1000

I thought about going the crate motor route but decided to take a stab at rebuilding my own. I will tell you what I learned was invaluable.

I have to agree 100% with DDixon! Last year, I considered buying a crate big block for my 72 Chevelle. The prices scared me off first of all but after talking to some of my people on my forum, they talked me into building one myself.

It was the best thing I ever did! I found a 454 in a 74 Caprice in a junk yard that was locked up. Got it for $300 and got lucky, it was a good usable core. With the help of some guys on my forum, they talked me through and answered the many questions I had. (a few books helped too)

I had such fun, I found another 454 about a month later in another junkyard so I did that one up as well! I just put that one in my 69 stepside a few days ago in fact.

I'm currently building the 350 for my wrecker so I'm building the 3rd engine and having alot of fun.

There's a big feeling of pride and accomplishment when you do it yourself. The nice thing is, I now have enough knowledge to build any engines I may need in the future. I already have plans to do the 327 in my 66 Impala next.

Now where would I be if I bought that crate engine?

[Edmond]

Originally Posted by Kidd-7

I would not but it, unless there was just absolutely no American made crates available. I buy everything I can in America; nothing against foreign people or imports per se, but the quality from Mexico & China generally suck. Aside from that they are made in sweat shops; I won't support abusing people just so I can save a buck. The biggest reason though, if Americans don't made stuff here then we don't work. I'll pay a little extra if need be so my neighbor has a job.
Sorry 'bout the rant here, but I believe strongly in buying American.

Manufacturers can put on 'Made in America' if at least a certain percentage of the item is indeed from the USA. That could even be the package material alone.
All this is according to the rules of the Federal Trade Commission.
Strange but true.

I put a new GM crate engine in my truck years ago and have enjoyed the truck to the max. Driving on propane from day one and already over 51.000 miles on it.

Cya,
Edmond

[Kidd-7]

Originally Posted by Edmond

Manufacturers can put on 'Made in America' if at least a certain percentage of the item is indeed from the USA. That could even be the package material alone.
All this is according to the rules of the Federal Trade Commission.
Strange but true.

I put a new GM crate engine in my truck years ago and have enjoyed the truck to the max. Driving on propane from day one and already over 51.000 miles on it.

Cya,
Edmond

Very true, there is a certain percentage; while I don't know off hand what it is I do know its low. Even still I'd rather have some USA worker than none.

[Shane]

Originally Posted by Edmond

Manufacturers can put on 'Made in America' if at least a certain percentage of the item is indeed from the USA. That could even be the package material alone.

That's incorrect. The Federal Trade Commission has strict regulations on what can and can't be sold as "Made in America" and what can and can't be sold as "assembled in America" based on the percentage of foreign sourced parts.

http://business.ftc.gov/documents/bu...e-usa-standard

The Federal Trade Commission (FTC) is charged with preventing deception and unfairness in the marketplace. The FTC Act gives the Commission the power to bring law enforcement actions against false or misleading claims that a product is of U.S. origin. Traditionally, the Commission has required that a product advertised as Made in USA be "all or virtually all" made in the U.S. After a comprehensive review of Made in USA and other U.S. origin claims in product advertising and labeling, the Commission announced in December 1997 that it would retain the "all or virtually all" standard. The Commission also issued an Enforcement Policy Statement on U.S. Origin Claims to provide guidance to marketers who want to make an unqualified Made in USA claim under the "all or virtually all" standard and those who want to make a qualified Made in USA claim.

[NoNeck]

My son purchased a 350/290 Horsepower crate engine from GM Performance over a year ago. We didn't know that the engine was built in Mexico until we received the engine and noticed the Mexico castings in the block. Like you, we were a little concerned.

We installed the engine and started the break in procedure. That's when we noticed a major amount of casting sand flowing from the radiator cap area. The block had not been washed and cleaned before final assembly!!! We flushed clean water through the engine for at least 20 minutes before we were able to get it clean. We started to worry.

After about 1000 miles, the engine began smoking... a little at first, then more and more. After weeks of research we determined (over the Internet) that there were several batches of 350 engines that were assembled with 3.8 Litre V-6 valve retainers and washers. The retainers extended too far down into the spring. Under valve compression, the retainers would actually tear the tops of valve seals. After a few thousand miles, the valve seals would leak causing your brand new crate engine to fumigate the area for miles around.

We called GM Performance about that 12 Month/12,000 mile warranty that came with the engine. We had purchased the engine the previous year for a 1969 Camaro project that we had apart. By the time the Camaro was ready for the Crate engine, our warranty had expired (the 12 month part). Nothing they could do, even though they acknowledged the valve retainer mix up on the assembly line for "a small batch" of engines. Now we are MAD!

In my opinion, I would NOT buy any engine, transmission, or go cart assembled in Mexico.

NoNeck

[hounddogs!]

Originally Posted by NoNeck

We installed the engine and started the break in procedure. That's when we noticed a major amount of casting sand flowing from the radiator cap area. The block had not been washed and cleaned before final assembly!!!

The more things change....
In 1994-5, I was working at Ford's Claycomo (KCMo) plant as they were starting up production on the Contour/Mystique. There were rumors of problems with the Mexican blocks, I think on the Ecotech 2L motors. I spent a solid week putting 50 miles each on cars. The powers that be figured that if the motor didn't lock up in that distance, things were fine and the car could go on the trailer. I was never stranded, but stayed the hell away from those cars ever after.

[sleepertruck72]

I am extremely happy with my Made in Mexico GM Crate engine It has held up real good, and loves burnouts

I guess its a gamble some people are not willing to take because its "made in Mexico" Personally I dont care because GM warranties it for whatever amount of time 12 months, 24 months I dont remember. You can probably get similar deals through a local engine builder as mentioned. I went with a crate because I ordered through the local GMC dealer and had it the next day ready to go.... Anyhow Good luck

[hdzammo]

Or they can put American made, since Mexico is in America.
Posted via Mobile Device

[Stricklinator]

Originally Posted by hdzammo

Or they can put American made, since Mexico is in America.
Posted via Mobile Device

Haha, that's true, I'll have to keep my eye out for that one; make sure things say USA instead!

Paul
Posted via Mobile Device

[FLDBRED]

A lot of honest responses! I wish GM would get it, I hate having to defend Chevy and GM all the time when people say that their stuff is made in Mexico and toyotas are made in the US. Let's face it,the reason a lot of us love Chevy is because of the American connection,and GM themselves are doing just the opposite.With me Chevy Runs Deep!

[Fitz]

Originally Posted by FLDBRED

A lot of honest responses! I wish GM would get it, I hate having to defend Chevy and GM all the time when people say that their stuff is made in Mexico and toyotas are made in the US. Let's face it,the reason a lot of us love Chevy is because of the American connection,and GM themselves are doing just the opposite.With me Chevy Runs Deep!

Don't blame GM, blame the UAW. The profit margin on most parts made in the US is too low due to the high labor rates. So, the factories were moved from the Midwest to Mexico and we trade a competitive price for crap that doesn't meet the quality standards we are accustomed to.

[VWBeamer]

I bought my truck without a motor and looked at the crate motors.

I decided to get a later model engine out of wrecked car.

For example you can get a LT1 with a 4L60E out of a mid 90's caprice or roadmaster CHEAP. Usually you can get a running motor and trans for under a grand. You also are going to get alt, power steering pump, AC compressor, and brackets cheap.

The motor has reverse flow cooling, cam driven water pump and port injection. The 4 speed auto has .70 od 4th.. The stock PCM can be used to run both if you get the stock harness. with the motor. It's going to deliver a lot better fuel mileage and be a lot easier to drive on the freeway.

With chip tuning, headers and cam change the motor will put out well over 350 hp.

Just a thought. I know a lot of people want to keep it simple with a carb and 3 speed AUTO, but the EFI and OD trans sure make it a lot nicer if you drive it much.

[67chevyc10719]

i say buy it and check the motor upon receiving it.. no matter who makes it ther fualty stuff out there.. good luck

[passthebuck]

My dad put a mexican crate 305 in his Caprice. He broke it in and I made sure to test it to its limits when I got my hands on it... It still is running great today 6 years later.

[sleepingbag]

ATK is a Mexican company, but they rebuild in Texas and stock in warehouses all around the US. Jasper is in Indiana, and those boys know how to rebuild a motor, but their best part is if they have a problem they take care of it at lightspeed....

[mikewarme]

Mexico is way better than china!!!!

[mikewarme]

Originally Posted by mikewarme

Mexico is way better than china!!!!

A/C delco parts are now made in china. I bought a new a/c delco headlight switch just to say i replaced it. The original was still working! Turned on the headlights 6 times and it broke! Literally fell apart! My new CPP tilt column ...... All the knobs asre cracked in less than 1 year! CHINA IS JUNK

[67chevyc10719]

Originally Posted by mikewarme

A/C delco parts are now made in china. I bought a new a/c delco headlight switch just to say i replaced it. The original was still working! Turned on the headlights 6 times and it broke! Literally fell apart! My new CPP tilt column ...... All the knobs asre cracked in less than 1 year! CHINA IS JUNK

that explain why acdelco stuff has been F&*kin up on my... DAM CHINA!

[67chevyc10719]

Originally Posted by mikewarme

A/C delco parts are now made in china. I bought a new a/c delco headlight switch just to say i replaced it. The original was still working! Turned on the headlights 6 times and it broke! Literally fell apart! My new CPP tilt column ...... All the knobs asre cracked in less than 1 year! CHINA IS JUNK

that explain why acdelco stuff has been F&*kin up on mE... DAM CHINA!

[special-K]

Originally Posted by 67chevyc10719

that explain why acdelco stuff has been F&*kin up on my... DAM CHINA!

Originally Posted by 67chevyc10719

that explain why acdelco stuff has been F&*kin up on mE... DAM CHINA!

You can say that again