What are you using for a GAS PEDAL - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hotrod1 · 07-13-2011, 05:21 PM

He hot rod guys. What are you using for a gas pedal (mechanical)? Was thinking about a firewall mount or a floor mount. Not sure which way to go. Pictures, pros, cons, other issues? What have you learned that we can learn from you?

Thanks

sgtusmc · 07-13-2011, 07:29 PM

I went with the Lokar floor mount with my 53. Super easy install. I've never had a problem with it. It was kind of expensive, however, I'll most likely buy another for my 59.

fredscarryall · 07-13-2011, 11:17 PM

i bought this one off of ebay. type in floor mount gas pedal. it $55. i haven't installed it yet, but i was suprised at the quality for the price.its half the cost of lokar and come with a univeral throttle cable

**mr48chev** · 07-13-2011, 11:43 PM

Some modified piece of junk out of a car that I junked out years ago. Too ugly to take any photos of but it worked for a lot of miles.

In the past I had a bad case of making what I had available at the time work and wasn't too willing to go out and buy aftermarket pieces if I could modify an existing piece.

solidaxel · 07-14-2011, 01:09 AM

Stock inside modified out side!

hotrod1 · 07-14-2011, 09:47 AM

Thanks for the contributions. Doesn't any one else use a gas pedal around here?

LDO · 07-14-2011, 10:08 AM

I'm using the stock gas pedal and linkage. Works just fine and I like the look of the linkages and stuff.

jimig1 · 07-14-2011, 01:13 PM

this is what I plan to use http://www.speedwaymotors.com/Billet...dals,3411.html

drivea55 · 07-14-2011, 05:24 PM

I merged a "92" firewall and floor in my 55, so the stock pedal and cable fit in its stock location. That style truck hs a floor mount pedal.

OrrieG · 07-14-2011, 05:48 PM

57 chevy auto pedal, pivots thru the firewall and uses a rod to the carb. I sold the pedal out of my 74 donor truck to a rodder. It bolts to the fire wall on the inside with a pull cable thru the FW to the carb.

55metalmonkey · 07-14-2011, 05:59 PM

I'm planning on using one something like this once the paint is done

http://www.billetspecialties.com/ite...id=255&pid=956

or this one
http://www.cfrperformance.com/CHEVY_.../hz-8854rc.htm

BlueJeep · 07-14-2011, 06:39 PM

I'm using the pedal out of the s10 that donated most of the parts for my build. 3 bolts through the toeboard, and uses the stock s10 throttle cable.

ambryatim · 07-14-2011, 10:47 PM

I am using a pedal from a 95 Astro Van.....bolts to the floor and it will work until I get the urge to get this....http://www.nolimit.net/prodinfo.asp?number=WA8503C
Posted via Mobile Device

whid · 07-19-2011, 07:53 PM

lokar spoon..........whid

S10Fan · 07-19-2011, 09:33 PM

WalMart spoon.......I'll get some pictures this weekend, remind me.

07-13-2011, 05:21 PM	#1
hotrod1 56 - autocross Join Date: Apr 2010 Location: Camarillo, Ca Posts: 1,121	What are you using for a GAS PEDAL He hot rod guys. What are you using for a gas pedal (mechanical)? Was thinking about a firewall mount or a floor mount. Not sure which way to go. Pictures, pros, cons, other issues? What have you learned that we can learn from you? Thanks

07-13-2011, 07:29 PM	#2
sgtusmc Registered User Join Date: Mar 2008 Location: Cali. Posts: 958	Re: What are you using for a GAS PEDAL I went with the Lokar floor mount with my 53. Super easy install. I've never had a problem with it. It was kind of expensive, however, I'll most likely buy another for my 59. __________________ My build, 53 GMC / S10 swap http://67-72chevytrucks.com/vboard/s...d.php?t=305723 My build, 59 Chevy / 88 fullsize swap http://67-72chevytrucks.com/vboard/s...hlight=sgtusmc U.S. Marines - Certified Counselors to the 72 Virgins Dating Club.

07-13-2011, 11:17 PM	#3
fredscarryall Registered User Join Date: Feb 2010 Location: gresham oregon Posts: 806	Re: What are you using for a GAS PEDAL i bought this one off of ebay. type in floor mount gas pedal. it $55. i haven't installed it yet, but i was suprised at the quality for the price.its half the cost of lokar and come with a univeral throttle cable Attached Images

07-13-2011, 11:43 PM	#4
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,705	Re: What are you using for a GAS PEDAL Some modified piece of junk out of a car that I junked out years ago. Too ugly to take any photos of but it worked for a lot of miles. In the past I had a bad case of making what I had available at the time work and wasn't too willing to go out and buy aftermarket pieces if I could modify an existing piece.

07-14-2011, 01:09 AM	#5
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: What are you using for a GAS PEDAL Stock inside modified out side! __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

07-14-2011, 09:47 AM	#6
hotrod1 56 - autocross Join Date: Apr 2010 Location: Camarillo, Ca Posts: 1,121	Re: What are you using for a GAS PEDAL Thanks for the contributions. Doesn't any one else use a gas pedal around here?

07-14-2011, 10:08 AM	#7
LDO Registered User Join Date: Feb 2011 Location: Senatobia, MS Posts: 1,297	Re: What are you using for a GAS PEDAL I'm using the stock gas pedal and linkage. Works just fine and I like the look of the linkages and stuff. __________________ Once a Marine, always a Marine! My (Her) 57 Build "Beverly" My 66 Build "Betty" My 85 C10 "Old Blue" Help Me Find "Old Blue" OLD BLUE PART II

07-14-2011, 01:13 PM	#8
jimig1 Registered User Join Date: Jul 2010 Location: Elk River, MN Posts: 614	Re: What are you using for a GAS PEDAL this is what I plan to use http://www.speedwaymotors.com/Billet...dals,3411.html __________________ 55 2nd series Chevy Pickup 2019 Chevy Equinox(Daily driver) 2011 Chevy Malibu (Wife's car) MSRA Member I went to a bookstore and asked the saleswoman, "Where's the self-help section?" She said if she told me, it would defeat the purpose. -George Carlin

07-14-2011, 05:24 PM	#9
drivea55 Registered User Join Date: Oct 2009 Location: Monson,MA Posts: 503	Re: What are you using for a GAS PEDAL I merged a "92" firewall and floor in my 55, so the stock pedal and cable fit in its stock location. That style truck hs a floor mount pedal. __________________ current project; 1950 GMC "Junk Yard Dawg" http://67-72chevytrucks.com/vboard/s...d.php?t=635960 ___________________________________________ SOLD to "ONEBADFIVEFIVE" http://67-72chevytrucks.com/vboard/s...d.php?t=436406

07-14-2011, 05:48 PM	#10
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: What are you using for a GAS PEDAL 57 chevy auto pedal, pivots thru the firewall and uses a rod to the carb. I sold the pedal out of my 74 donor truck to a rodder. It bolts to the fire wall on the inside with a pull cable thru the FW to the carb. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

07-14-2011, 05:59 PM	#11
55metalmonkey Registered User Join Date: Aug 2010 Location: West Kelowna, BC Posts: 488	Re: What are you using for a GAS PEDAL I'm planning on using one something like this once the paint is done http://www.billetspecialties.com/ite...id=255&pid=956 or this one http://www.cfrperformance.com/CHEVY_.../hz-8854rc.htm

07-14-2011, 06:39 PM	#12
BlueJeep Registered User Join Date: Mar 2008 Location: Waukee, Iowa Posts: 1,608	Re: What are you using for a GAS PEDAL I'm using the pedal out of the s10 that donated most of the parts for my build. 3 bolts through the toeboard, and uses the stock s10 throttle cable. __________________ build threads: 86 Suburban 88 Jeep 6.0 swap 49 Chevy truck 54 Chevy wagon 86 Suburban lowered 4/6 54 Chevy wagon 49 Chevy/s10 mix 88 Jeep Wrangler rockcrawler

07-14-2011, 10:47 PM	#13
ambryatim Registered User Join Date: Aug 2009 Location: Corinth, TX Posts: 210	Re: What are you using for a GAS PEDAL I am using a pedal from a 95 Astro Van.....bolts to the floor and it will work until I get the urge to get this....http://www.nolimit.net/prodinfo.asp?number=WA8503C Posted via Mobile Device __________________ Better to have it and not need it, then to need it and not have it. Fork In The Road....Cummins Build My Build Thread... Alternative A/C Mounting for LS Engines 4L60E Transmission Rebuild Info Trailing Arm How To

07-19-2011, 07:53 PM	#14
whid Registered User Join Date: Jun 2008 Location: franklin,ohio Posts: 43	Re: What are you using for a GAS PEDAL lokar spoon..........whid

07-19-2011, 09:33 PM	#15
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,642	Re: What are you using for a GAS PEDAL WalMart spoon.......I'll get some pictures this weekend, remind me. __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.