long to short bed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rich67 · 07-21-2011, 01:14 PM

thinking about cutting down my c-20 long wood bed. anyone done this(im sure)? wondering where i have to cut. in front of wheels? rear part behind wheels the same length with long and short? do i need to split and take out excess or can i take off front where header panel is? any input appreciated. thanx rich

VA72C10 · 07-21-2011, 01:37 PM

There are a few threads in the FAQ section on this...one was by Rckcrln.

rich67 · 07-21-2011, 01:45 PM

Quote:

Originally Posted by VA72C10

There are a few threads in the FAQ section on this...one was by Rckcrln.

thank you sir, rich

cdowns · 07-21-2011, 02:21 PM

alot more attempts at this end up in the dumpster rather than prime examples of completed work

a huge job make no mistake you need to b excellent at measuring cutting and above all else welding

C20-67_N_MO · 07-21-2011, 02:38 PM

Good luck Rich.

I hope you are able to make this happen.

Gene · 07-21-2011, 03:06 PM

It's really not that big of a deal. I have done a couple. As long as you can weld and have the right tools you can do it. 12 inches under the cab, 8 off the very rear of the frame, move rear cab mounts forward, shorten driveshaft, brake lines wires etc.. Pretty straightforward.

07-21-2011, 01:14 PM	#1
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	long to short bed thinking about cutting down my c-20 long wood bed. anyone done this(im sure)? wondering where i have to cut. in front of wheels? rear part behind wheels the same length with long and short? do i need to split and take out excess or can i take off front where header panel is? any input appreciated. thanx rich

07-21-2011, 01:37 PM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: long to short bed There are a few threads in the FAQ section on this...one was by Rckcrln. __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-21-2011, 02:21 PM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: long to short bed alot more attempts at this end up in the dumpster rather than prime examples of completed work a huge job make no mistake you need to b excellent at measuring cutting and above all else welding __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

07-21-2011, 02:38 PM	#5
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: long to short bed Good luck Rich. I hope you are able to make this happen. __________________ Coming Soon: Project 1970 Country Truck

07-21-2011, 03:06 PM	#6
Gene Registered User Join Date: Aug 2002 Location: Muskogee, Oklahoma Posts: 2,914	Re: long to short bed It's really not that big of a deal. I have done a couple. As long as you can weld and have the right tools you can do it. 12 inches under the cab, 8 off the very rear of the frame, move rear cab mounts forward, shorten driveshaft, brake lines wires etc.. Pretty straightforward.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.