GA Parting 94 - C2500 6.5 TD

[chevytrucksonly]

108,000 K on truck
The 4l80e Transmission blew out.

-$550 plus s/h - 1 year old Custom leather Buckets and console/jumper seat (can be dyed to another color with spray dye). They are designed to OEM specs for mounting to an existing GM bench or bucket seat threaded bolt patterns in the floor. He paid $1400 new for seat setup-ouch!
-All other interior pieces are in great shape.
-$80 plus s/h - Set of gray/charcoal door panels – Great shape.
-$20 each - shipped- Door Panel power window and lock switches
-Has a 6.5 TD F Code-290 HP. It will be sold as breakdown or a rebuild; I have 2 more of these engines in my shop. So if you need heads, block, crank etc let me know.
1) $225 plus s/h –Turbo Charger GM – 4
2) $90 plus s/h – Turbo exhaust
Many other diesel parts.
-$35 plus s/h - Each fender has one dent near front but was sand blasted primed and rubberized/undercoated on inside of fender and in seams.
-R door has one dent (hand size)
- The hood has 3 small pings in front curve and is a red color with stripe on it-but otherwise in great shape.
-$85 plus S/H - Tailgate has 2 small pings at top and again is a different color-blue
-$90 plus s/h - Overhead on cab clearance lights
-$450 local pick up - Short wheel base Z71 Bed-perfect condition.
He was about to paint and put another bed on it and more custom work to the frame and exterior.

-$325 local p/u - Rear Axle 8 - LUG 4.10 RATIO 4.10R (GT5)
-$50 plus s/h - Line-x Sprayed Mirrors
-BUMPER AND WINCH ARE STAYING.
Also parting 88 k1500 Silverado 4x4, Auto, 350c.i – left front end wreck damage.

Let me know specifically what you need and I will post or pm you back with the cost and include zip for shipping.
Payments through PayPal unless other arrangements are made. Local pickup available, shipped from 30528.

Michael D

[BIGCHEVYMAN]

Do you have a complete tubro set up? i am looking at putting a 6.5 turbo set-up on my cucv.

[chevytrucksonly]

I do have a couple of setups. includes gm4 turbo and hardware,turbo exhaust, Turbo tube drain, exhaust crossover, breather unit , upper and lower intakes and downpipe to connect to your exhaust-everything. Around $600 or less. Sometimes a valve cover is required depending on year of 6.2, if needed I'll give you one.
I can give you a firm price If you would tell me what year the truck is and year of the 6.2.

Michael

Originally Posted by BIGCHEVYMAN

Do you have a complete tubro set up? i am looking at putting a 6.5 turbo set-up on my cucv.

[70BLAZERX2]

get the 4L80E wire harness and stand alone computer for it..

I dont need it but someone out there will



That is a hard item to find for a 4L80E conversion in an early truck..

That will move fast also. It is supposed to be a seperate harness from the engine..and works on the TPS to shift.

[chevytrucksonly]

Thanks for the input. They are difficult to locate but I do have 2 of them I'm holding on to to use with a conversion from elect fuel injection(94 and up 6.5) to mechanical fuel injection (93 and down on the 6.5 and 6.2 diesels). The efi had many problems and cost a lot $ to repair or replace. There's an aftermarket trans computer that will do the same thing even better-but it cost around $700

Thanks
Michael D

Originally Posted by 70BLAZERX2

get the 4L80E wire harness and stand alone computer for it..

I dont need it but someone out there will



That is a hard item to find for a 4L80E conversion in an early truck..

That will move fast also. It is supposed to be a seperate harness from the engine..and works on the TPS to shift.

[BarryB]

What about the guages on the pillar with the pillar mount? With the sending units? and what are they for trans temp, boost, etc.

[chevytrucksonly]

Originally Posted by BarryB

What about the guages on the pillar with the pillar mount? With the sending units? and what are they for trans temp, boost, etc.

They have been sold already, sorry,
Michael

[BarryB]

How bad is the motor, I assume it had to have been running when the tranny blew out. I have a friend that is looking for a good running 6.5 to put in his 92. If so,How much ?

[Kurt L]

What bout the bezel? do you still have it? if so how much plus S&H to 32218.

[chevytrucksonly]

The bezel around the the instrument cluster, just trying to make sure I know exactly what piece your needing. There's a couple of old pics below if that helps, if not tell me exactly where it is.
Michael

Originally Posted by Kurt L

What bout the bezel? do you still have it? if so how much plus S&H to 32218.

[Kurt L]

ywah thats the one the second pic. i need the screws also.

[chevytrucksonly]

Let me get shipping cost and PM you later today with cost-I've got some screw I will need to locate.

Michael D

Originally Posted by Kurt L

ywah thats the one the second pic. i need the screws also.