question about factory air - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**clemdaddy** · 07-28-2011, 12:30 PM

i want to replace the blower motor in a 66 factory air truck. the folks at 'old air products' in texas say that they don't show a listing on the blower motor for factory air but that they are different from the non-air heater motor. something about a bigger mounting flange.

does anybody out there know if later model blower motors will work, if the mounting flange is different? like say 73-82 model trucks.

thanks, clem

64fleetside · 07-28-2011, 01:51 PM

Just about any GM heater motor will fit. The fact A/C did use a different one with larger windings, but it's almost impossible to find one. They all bolt up the same, & should be still available from your FLAPS--Four Seasons/Factory Air part # is 35587

**Clyde65** · 07-28-2011, 05:44 PM

post pics with measurements, gives some of us visually challenged folks a chance to put our .02 in.

**clemdaddy** · 08-01-2011, 02:03 PM

just wanted to put this thread to sleep with a happy ending before it slides off into the abyss.

heres the pics for the challenged, just a joke clyde my man. 66 air motor on the right, note cooling hole which has a rubber elbow that also is attached to the firewall box and rotates air around the windings.

and you're right 64 fleetside... the air motor is the same as later suburban motors and is interchangeable.

thanks guys

07-28-2011, 12:30 PM	#1
clemdaddy Senior Member Join Date: Oct 2009 Location: Fayetteville, Arkansas Posts: 1,923	question about factory air i want to replace the blower motor in a 66 factory air truck. the folks at 'old air products' in texas say that they don't show a listing on the blower motor for factory air but that they are different from the non-air heater motor. something about a bigger mounting flange. does anybody out there know if later model blower motors will work, if the mounting flange is different? like say 73-82 model trucks. thanks, clem

07-28-2011, 01:51 PM	#2
64fleetside Registered User Join Date: Apr 2004 Location: arkieland Posts: 1,070	Re: question about factory air Just about any GM heater motor will fit. The fact A/C did use a different one with larger windings, but it's almost impossible to find one. They all bolt up the same, & should be still available from your FLAPS--Four Seasons/Factory Air part # is 35587

07-28-2011, 05:44 PM	#3
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: question about factory air post pics with measurements, gives some of us visually challenged folks a chance to put our .02 in. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

08-01-2011, 02:03 PM	#4
clemdaddy Senior Member Join Date: Oct 2009 Location: Fayetteville, Arkansas Posts: 1,923	Re: question about factory air just wanted to put this thread to sleep with a happy ending before it slides off into the abyss. heres the pics for the challenged, just a joke clyde my man. 66 air motor on the right, note cooling hole which has a rubber elbow that also is attached to the firewall box and rotates air around the windings. and you're right 64 fleetside... the air motor is the same as later suburban motors and is interchangeable. thanks guys Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.