![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Sep 2010
Location: none
Posts: 239
|
Can OEM Door Handles be polished like new from slightly pocked?
ive got some chrome door handles, oem for a 70' that are slightly pocked... i was just wondering if its possible to polish these to new again using one of those power ball like things? every dollar counts at this point and i wouldnt mind just polishing mine if it saves a buck.
|
![]() |
![]() |
![]() |
#2 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Can OEM Door Handles be polished like new from slightly pocked?
wish it was possible.
![]() |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Can OEM Door Handles be polished like new from slightly pocked?
if they are pitted and you get aggressive with polishing them the chrome is thin and you end up with bare metal pitted doorhandles
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#4 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,859
|
Re: Can OEM Door Handles be polished like new from slightly pocked?
The pitting is oxidation on the metal coming up through the plating. Just like paint,the only way to refinish the metal is to go through the finish. The pitting can be removed and the part re-plated.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Sep 2010
Location: none
Posts: 239
|
Re: Can OEM Door Handles be polished like new from slightly pocked?
Okay, question two then, if I've repolished some chrome lugs and they are rusting easily, is there anything I can soak them in to inhib the flash rusting?
Posted via Mobile Device |
![]() |
![]() |
![]() |
#6 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,859
|
Re: Can OEM Door Handles be polished like new from slightly pocked?
Well,clear won't hold up on lugs too well. If you can get them cleaned up,heavy waxing is your best bet. You need to seal the pores on chrome. Actually,some mineral oil would do well,but draw dirt. Just keep cleaning and putting oil back on.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
Bookmarks |
|
|