help help help.. track bar - The 1947 - Present Chevrolet & GMC Truck Message Board Network

crispo-71 · 08-23-2011, 06:39 PM

i have a 70 c10 short stepside i am bagging.. i want to know what kind of track bar do i need were can i get one. thats the last thing i need to finish my frame

powerdriver 1958 · 08-23-2011, 08:08 PM

Suspension forum will have answers , Moving this for you

**Clyde65** · 08-24-2011, 11:15 AM

A double adjustable, I would say. How much of a drop would you be going, POL, CPP and others have them but depends on your drop too, some relocate the mount onto the trailing arm mount and some are just replacements. Check out the vendors forum above.

PBFAB.COM · 08-24-2011, 03:22 PM

We make a pretty nice one, that also includes a new mounting bracket for the driver side frame rail. It sells for $149.

crispo-71 · 09-09-2011, 07:45 PM

Quote:

Originally Posted by porterbuilt

We make a pretty nice one, that also includes a new mounting bracket for the driver side frame rail. It sells for $149.

ok porterbuilt, one last question before i buy this.. on the ends of the bar, how are the round pieces that hold bolt go in.. r they screwd in or do they slide in.. i dnt see any thread on the 2 pieces.. never upgraded one before sorry for asking?

**Clyde65** · 08-24-2011, 04:13 PM

Sorry Nate, I didnt mention your products

Crispo, Nate has a very good reputation around here, his products are all top quality and his CS is superb!

Sorry for the shameless plug Nate, just spewing what I have read/heard. No you dont owe me anything...JK.

crispo-71 · 08-24-2011, 06:01 PM

ok thanx.. everything is stock i only but a c notch on it, i know it wont be that low, but thanx i think thats the one im getting, easy 2 install?

PBFAB.COM · 08-24-2011, 07:08 PM

Quote:

Originally Posted by crispo-71

ok thanx.. everything is stock i only but a c notch on it, i know it wont be that low, but thanx i think thats the one im getting, easy 2 install?

You will have to unbolt your trailing arms to install the shim on the driver side and the mounting bracket on the passenger side. You will have to remove some rivets that hold the original mounting bracket on the driver side frame rail to remove it. You will a couple of the holes that held the original trac bar bracket to locate the new one, and drill a few more. Not overly difficult, if the rivets and u-bolts cooperate.

texastrendz · 08-24-2011, 10:05 PM

Here is one installed from Porterbuilt.

Pkh66 · 08-24-2011, 10:09 PM

One word. Porterbuilt.
Posted via Mobile Device

**Clyde65** · 09-09-2011, 08:02 PM

They are screwed into the end of the bar, this allows them to be adjustable.

PBFAB.COM · 09-10-2011, 02:03 PM

Like clyde mentioned, the rod ends are both threaded (one right hand and one left hand) this allows the bar length to be adjusted without unbolting it.

Posted via Mobile Device

crispo-71 · 09-12-2011, 08:28 PM

Quote:

Originally Posted by porterbuilt

Like clyde mentioned, the rod ends are both threaded (one right hand and one left hand) this allows the bar length to be adjusted without unbolting it.

Posted via Mobile Device

im having trouble ordering it. how do i do it, there is nothing that shows buy it on that site

PBFAB.COM · 09-12-2011, 09:01 PM

Quote:

Originally Posted by crispo-71

im having trouble ordering it. how do i do it, there is nothing that shows buy it on that site

Shoot me a pm with your number and I will call you tomorrow. We don't have an on line store... yet.

Posted via Mobile Device

Pkh66 · 09-12-2011, 09:02 PM

Awesome product. Just picked one up for myself.
Posted via Mobile Device

zipper · 10-17-2014, 01:13 PM

Will the PB trac bar work with the CPP notch?

08-23-2011, 06:39 PM	#1
crispo-71 Registered User Join Date: Jun 2011 Location: new braunfels tx Posts: 57	help help help.. track bar i have a 70 c10 short stepside i am bagging.. i want to know what kind of track bar do i need were can i get one. thats the last thing i need to finish my frame

08-23-2011, 08:08 PM	#2
powerdriver 1958 Kid's Mechanic Join Date: Nov 2006 Location: Kansas City Posts: 8,241	Re: help help help.. track bar Suspension forum will have answers , Moving this for you

08-24-2011, 11:15 AM	#3
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: help help help.. track bar A double adjustable, I would say. How much of a drop would you be going, POL, CPP and others have them but depends on your drop too, some relocate the mount onto the trailing arm mount and some are just replacements. Check out the vendors forum above. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

08-24-2011, 03:22 PM	#4
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: help help help.. track bar We make a pretty nice one, that also includes a new mounting bracket for the driver side frame rail. It sells for $149. __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

08-24-2011, 04:13 PM	#6
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: help help help.. track bar Sorry Nate, I didnt mention your products Crispo, Nate has a very good reputation around here, his products are all top quality and his CS is superb! Sorry for the shameless plug Nate, just spewing what I have read/heard. No you dont owe me anything...JK. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

08-24-2011, 06:01 PM	#7
crispo-71 Registered User Join Date: Jun 2011 Location: new braunfels tx Posts: 57	Re: help help help.. track bar ok thanx.. everything is stock i only but a c notch on it, i know it wont be that low, but thanx i think thats the one im getting, easy 2 install?

08-24-2011, 10:05 PM	#9
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: help help help.. track bar Here is one installed from Porterbuilt. Attached Images

08-24-2011, 10:09 PM	#10
Pkh66 Registered User Join Date: Apr 2011 Location: Dallas Posts: 94	Re: help help help.. track bar One word. Porterbuilt. Posted via Mobile Device

09-09-2011, 08:02 PM	#11
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: help help help.. track bar They are screwed into the end of the bar, this allows them to be adjustable. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

09-10-2011, 02:03 PM	#12
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: help help help.. track bar Like clyde mentioned, the rod ends are both threaded (one right hand and one left hand) this allows the bar length to be adjusted without unbolting it. Posted via Mobile Device __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

09-12-2011, 09:02 PM	#15
Pkh66 Registered User Join Date: Apr 2011 Location: Dallas Posts: 94	Re: help help help.. track bar Awesome product. Just picked one up for myself. Posted via Mobile Device

10-17-2014, 01:13 PM	#16
zipper Registered User Join Date: Aug 2013 Location: Anchorage Alaska Posts: 55	Re: help help help.. track bar Will the PB trac bar work with the CPP notch?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.