![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
LED King
Join Date: Jan 2003
Location: Sacramento, CA
Posts: 2,088
|
Licence plate light LED Upgrade
Today I noticed *yet again* my licence plate light burn out! I am tired of fighting with this and I have a cop looking for me (beat her in court over a sh*t ticket) so I need to get the thing fixed. Probably a ground issue, but hell I don't have the time! Sooo, I used two white LEDs I had for another project and created a LED "bulb". What I did was cut a little empty circuit board to set inside the lens of the light. (I have the standard chrome bumper with one large licence light) I soldered a resistor and the two white LEDs to the board. I took the housing and shaved off the bulb holder (it was in the way of the board). I soldered a wire to the center terminal on the bulb holder and the ground was just a bare wire in one of the screw holes. I stuck it together and tested it out. Looks great! The 2 LEDs light it up - just enough to loko pretty but not say LOOK AT MEEEE!!!! I will get pictures Monday.
__________________
Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32 Last edited by apstguy; 04-10-2003 at 12:40 AM. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Oct 2002
Location: Phoenix, Arizona
Posts: 4,703
|
Yeah, pictures will be nice
![]()
__________________
* AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION * |
![]() |
![]() |
![]() |
#3 |
L.E.D. Freak
Join Date: Jan 2002
Location: Polson MT
Posts: 1,358
|
I can make a bolt on licence plate light with ultra bright white LEDs. In a aluminum channel. Let me know
__________________
Specializing in Custom L.E.D. inserts. http://www.ccled.com/ Contact me @ blazer2wd1972@hotmail.com (406)675-8082 or Joel @ jmcwaters@eps-corp.net 1972 2wd Blazer, 350/700R4/3:73 posi, err & Custom L.E.D. inserts! LOL |
![]() |
![]() |
![]() |
#4 |
~THE SILVER BULLET~
Join Date: Oct 2002
Location: WYOMING
Posts: 285
|
you didnt have time to check a ground but had time to do all that?
__________________
~1980 c10 chevy scottsdale~ ~2.5/4 drop 305/th350c~ |
![]() |
![]() |
![]() |
#5 |
LED King
Join Date: Jan 2003
Location: Sacramento, CA
Posts: 2,088
|
Yup! Hehe . . . turned out the ground was fine. I still can't figure out why it kept burning out. Oh well - won't have to worry now!
__________________
Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32 |
![]() |
![]() |
![]() |
#6 |
BeWarE tHe eViL CrAnkTOe!
Join Date: Oct 2002
Location: Yukon, OK
Posts: 3,605
|
uhhhhhhh..... PICS?? hahaah
__________________
~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - 1986 Chevy Custom SWB *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods ![]() www.cardomain.com/id/ramairdave AIM Screenname - Jester84 |
![]() |
![]() |
![]() |
#7 |
LED King
Join Date: Jan 2003
Location: Sacramento, CA
Posts: 2,088
|
Tomorrow I'll get pictures - The camera is taken for the day (the digital camera I use is a $1000 Canon from my mom's work. It is one cool playtoy!)
__________________
Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32 |
![]() |
![]() |
![]() |
Bookmarks |
|
|