![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Oct 2009
Location: Sacramento, CA
Posts: 161
|
Throttle Cable - Huge PITA
I realized the other day that my throttle cable was about 85 percent frayed and about to break. So, I headed down to my local parts store and picked up a "generic" replacement. What a piece of crap! You basically have to cut it to fit, and that's all well and good, but the cable attaches to a little metal dealy on the carb by slipping into a hole and then tightening with an allen wrench to secure. Well, I couldn't get the allen wrench nut tight enough to hold the cable because the head stripped out!
So, I resorted to J.B. Weld, because I need to help my friend move tomorrow. This should have been a piece of cake. Hopefully it is as strong as I think it is. Anyway, I am running an Edelbrock 1406 on a Performer intake. Does anybody know of a good throttle cable that will match right up???
__________________
1972 Chevy C-10 ~ 188,000 miles give or take |
![]() |
![]() |
![]() |
#2 |
1969 Custom 30 wrecker
Join Date: Sep 2001
Location: Pottsville, Pa
Posts: 2,611
|
Re: Throttle Cable - Huge PITA
Try to find a good used one. There were probably different lengths based on engine size so take that into consideration if looking for one.
![]()
__________________
Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10 |
![]() |
![]() |
![]() |
Bookmarks |
|
|