![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jan 2011
Location: Big Spring Tx
Posts: 127
|
any suggestions on fixing this?
![]() It seems someone wanted to stuff a really hug engine into my truck they cut out part of the tranny supports. smashed in the front corners of the inner fenders and did this to my the motor mounts. Imm not sure the best way to remove these. Im thinking a grinder and lots of sparks though? |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
|
Re: any suggestions on fixing this?
Wow!!
Cut it off and grind it flat again. What the hello were they thinking?
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Mar 2010
Location: Fayetteville NC
Posts: 98
|
Re: any suggestions on fixing this?
Probably looks worse than it is. I'd just cut those mounts off and grind down those globby welds and bolt in a set of stock type towers.
Last edited by S-31; 09-14-2011 at 10:04 PM. Reason: spelling |
![]() |
![]() |
![]() |
#4 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: any suggestions on fixing this?
Yep, time for a grinder with a cutoff wheel and a grinding wheel. Once you get that mess removed, you will still need to do a little fabricating if you are going to put a V8 into your '60-'62. The frames on those are shorter than the '63 + trucks, so you will need a spacer on top of the frame for the motor mount bracket, no matter which style you go with.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#5 |
Check The Champ, Demonstrator
![]() Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
|
Re: any suggestions on fixing this?
Protect your windshield, from the experience!
__________________
1963 Chevrolet Truck Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jan 2011
Location: Big Spring Tx
Posts: 127
|
Re: any suggestions on fixing this?
Thnx everyone as soon as it stops raining Ill get the grinder out and go at it. Good idea on the wind shield mine needs replaced anyway though. Thnx captain fab for the great tip I didnt realize my 60 had a shorter frame and Im going to eventualy drop a 350 in it..
|
![]() |
![]() |
![]() |
Bookmarks |
|
|