Need help with a stepside Taillight Measurement - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blkcorvair · 09-22-2011, 06:37 PM

Maybe someone out there with a Stepside can help. I just mounted the new Triplus bed sides I have. Im a little dissapointed they dont have holes for the Rev Light or Taillight Brackets! With no nuts welded to thew back side.

So it looks like I am going to have to use nut serts.

But I dont have my old bedsides for reference. I can locate the Rev light bracket using one hole that is there. But I need a measurement. Can someone get me a measeurement from the top of the Reverse light Bracket edge to the Bottom of the Taillight bracket edge on a stock Stepside???

It looks about 2-1/8" in a reference picture I have but wanna be sure before I start drilling. Thanks!!!!

gcburdic · 09-23-2011, 09:45 AM

ttt...a little help from the stepside guys

406 Q-ship · 09-23-2011, 11:24 AM

2.20 inches taken right off my truck 2 minutes ago.

**Palf70Step** · 09-23-2011, 11:36 AM

Something I saved from a post years ago.

Measurements for the stock taillight and back up light brackets.

Hole #1 2" from the bedside, 3 1/2" from the bottom of the stake pocket.

Hole #2 2 3/8" from the bedside, 10" from the bottom of the stake pocket.

09-23-2011, 11:24 AM	#3
406 Q-ship Registered User Join Date: Oct 2010 Location: Largo Florida Posts: 632	Re: Need help with a stepside Taillight Measurement 2.20 inches taken right off my truck 2 minutes ago. __________________ Lifes journey is not to arrive at the gate well preserved, it is to slide in sideways all used up and wore out yelling.....God what'a ride! Where patience fails, force prevails Stapp's Ironical Paradox "The universal aptitude for ineptitude makes any human accomplishment an incredible miracle."

09-23-2011, 11:36 AM	#4
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: Need help with a stepside Taillight Measurement Something I saved from a post years ago. Measurements for the stock taillight and back up light brackets. Hole #1 2" from the bedside, 3 1/2" from the bottom of the stake pocket. Hole #2 2 3/8" from the bedside, 10" from the bottom of the stake pocket. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

09-22-2011, 06:37 PM	#1
blkcorvair Registered User Join Date: May 2011 Location: Long Island NY Posts: 787	Need help with a stepside Taillight Measurement Maybe someone out there with a Stepside can help. I just mounted the new Triplus bed sides I have. Im a little dissapointed they dont have holes for the Rev Light or Taillight Brackets! With no nuts welded to thew back side. So it looks like I am going to have to use nut serts. But I dont have my old bedsides for reference. I can locate the Rev light bracket using one hole that is there. But I need a measurement. Can someone get me a measeurement from the top of the Reverse light Bracket edge to the Bottom of the Taillight bracket edge on a stock Stepside??? It looks about 2-1/8" in a reference picture I have but wanna be sure before I start drilling. Thanks!!!!

09-23-2011, 09:45 AM	#2
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Need help with a stepside Taillight Measurement ttt...a little help from the stepside guys __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.