NY eaton ho52 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigrigpardo · 10-11-2011, 03:02 PM

got an eaton ho52 out of my 71 k20. worke perfect. new bearings. breaks hardware seals wheel cylinders cut drums. comes with extra set of break shoes. worked great drove with it everyday. thought i heard a noise in it. so i bought a 14bolt ff disc. but when i did the tear down and pulled the wheels off. one axle bolt was rolling in the center cap of the rim. so noise was nothing. ratio is 4.10 open have the extra set of break shoes too which are hard to get. axle is straight and ready to roll for a long time. only thing missing is the shock mounts. i needed them for the 14 bolt. asking 250.

bigrigpardo · 10-12-2011, 08:41 AM

someone make me an offer. this is a great rear end and on the contrary to belief you can still get all the parts for this. i ordered my parts and with in 2 days were at my parts guy. they just keep them in there warehouse. but they had them in there computer and still do

HeavyMetalChevy · 10-12-2011, 09:12 AM

Quote:

Originally Posted by bigrigpardo

someone make me an offer. this is a great rear end and on the contrary to belief you can still get all the parts for this. i ordered my parts and with in 2 days were at my parts guy. they just keep them in there warehouse. but they had them in there computer and still do

very true...not as hard to find as it seems... I have an Eaton52 and a Dana60...I prefer the Eaton really.. I think its more "beefy" and sturdy.

bigrigpardo · 10-12-2011, 09:19 AM

its a great rear. i just thought it blew up. i had all ready spent the money on the disc 14boltff so i said screw it and did the swap.

HeavyMetalChevy · 10-12-2011, 10:33 AM

Quote:

Originally Posted by bigrigpardo

its a great rear. i just thought it blew up. i had all ready spent the money on the disc 14boltff so i said screw it and did the swap.

well the prob is... whole rear ends weigh in at a light 400 lbs. I am in Indiana... Freight charges would make anyone faint...lol I just want the posi setup because I already have an Dana60 I am trying to get rid of with leaf suspension and it has all new brake hardware like yours... Hard fittings and hoses... soo yeah

HeavyMetalChevy · 10-12-2011, 10:35 AM

If I cant get rid of mine I'm going to cut the pumpkin take the brakes off and scrap it... I can get close to 100 scrap... Steel is around 24 cents a pound.. 400x $ ).24 = 96.. ya' know?

tow guys · 10-12-2011, 08:49 AM

Where did you order your parts from? I have an HO72 and have searched the world over and can't find a damn thing for it.
It's a great rear. They both are. Very heavy duty for duallys and 4x4's.

bigrigpardo · 10-12-2011, 08:54 AM

hate giving away my secrets but napa. the one by me had all the shoes wheel cylinders hardware. and i think seals for the hub but dont quote me. actually there warehouse that they came from is in nj. the shoes were rebonded and worked great.

**jaros44sr** · 10-12-2011, 10:15 AM

Quote:

Originally Posted by bigrigpardo

got an eaton ho52 out of my 71 k20. worke perfect. new bearings. breaks hardware seals wheel cylinders cut drums. comes with extra set of break shoes. worked great drove with it everyday. thought i heard a noise in it. so i bought a 14bolt ff disc. but when i did the tear down and pulled the wheels off. one axle bolt was rolling in the center cap of the rim. so noise was nothing. ratio is 4.10 open have the extra set of break shoes too which are hard to get. axle is straight and ready to roll for a long time. only thing missing is the shock mounts. i needed them for the 14 bolt. asking 250.

If it is around in 3 weeks i would be interested

bigrigpardo · 10-13-2011, 08:45 AM

ttt need to get this awesome rear a new home

bigrigpardo · 10-24-2011, 08:58 PM

has new brakes and a new set of shoes. very relible rear. bolt in and go. has e brake cables and all

Beat68CST · 01-02-2012, 02:42 AM

Would you sell just the complete third member and gears?
Posted via Mobile Device

bigrigpardo · 02-19-2012, 03:46 PM

any interest needs a new home soon. may ship

HeavyMetalChevy · 02-19-2012, 09:17 PM

Quote:

Originally Posted by bigrigpardo

any interest needs a new home soon. may ship

Hey I have a freight team now and can ship this for you and any potential buyer. You would just have to secure it to a skid/pallet. It is really affordable especially with your selling price.

Shaun1162 · 03-22-2012, 11:40 AM

This still available? What gear are in it? I'd be interested in the 3rd member..

bigrigpardo · 03-22-2012, 12:07 PM

yes its still availible it has 4.10 gears is an open. drums were just cut new bearings installed and new shoes springs andwheel cylinders

Shaun1162 · 03-22-2012, 01:09 PM

Quote:

Originally Posted by bigrigpardo

yes its still availible it has 4.10 gears is an open. drums were just cut new bearings installed and new shoes springs andwheel cylinders

Sorry, guess I should have read your whole first post on the ratio haha... I'm interested, but I really only need the 3rd member, but I'm guessing you don't really want sell just that...

Critterman71 · 03-22-2012, 09:04 PM

If any one needs GM parts send me the part # and what it is for on the rear end and I have a line for GM Parts Dana 60 especially

10-11-2011, 03:02 PM	#1
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	eaton ho52 got an eaton ho52 out of my 71 k20. worke perfect. new bearings. breaks hardware seals wheel cylinders cut drums. comes with extra set of break shoes. worked great drove with it everyday. thought i heard a noise in it. so i bought a 14bolt ff disc. but when i did the tear down and pulled the wheels off. one axle bolt was rolling in the center cap of the rim. so noise was nothing. ratio is 4.10 open have the extra set of break shoes too which are hard to get. axle is straight and ready to roll for a long time. only thing missing is the shock mounts. i needed them for the 14 bolt. asking 250.

10-12-2011, 08:41 AM	#2
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: eaton ho52 someone make me an offer. this is a great rear end and on the contrary to belief you can still get all the parts for this. i ordered my parts and with in 2 days were at my parts guy. they just keep them in there warehouse. but they had them in there computer and still do

10-12-2011, 09:19 AM	#4
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: eaton ho52 its a great rear. i just thought it blew up. i had all ready spent the money on the disc 14boltff so i said screw it and did the swap.

10-12-2011, 10:35 AM	#6
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: eaton ho52 If I cant get rid of mine I'm going to cut the pumpkin take the brakes off and scrap it... I can get close to 100 scrap... Steel is around 24 cents a pound.. 400x $ ).24 = 96.. ya' know? __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

10-12-2011, 08:49 AM	#7
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Re: eaton ho52 Where did you order your parts from? I have an HO72 and have searched the world over and can't find a damn thing for it. It's a great rear. They both are. Very heavy duty for duallys and 4x4's. __________________ Check out my 70 GMC tow truck project here.......http://67-72chevytrucks.com/vboard/s...d.php?t=440431 Member of the 1-Ton Club! http://www.eastcoastcarandtruck.org

10-12-2011, 08:54 AM	#8
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: eaton ho52 hate giving away my secrets but napa. the one by me had all the shoes wheel cylinders hardware. and i think seals for the hub but dont quote me. actually there warehouse that they came from is in nj. the shoes were rebonded and worked great.

10-13-2011, 08:45 AM	#10
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: eaton ho52 ttt need to get this awesome rear a new home

10-24-2011, 08:58 PM	#11
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: eaton ho52 has new brakes and a new set of shoes. very relible rear. bolt in and go. has e brake cables and all

01-02-2012, 02:42 AM	#12
Beat68CST Registered User Join Date: Oct 2010 Location: Buckeye Arizona Posts: 470	Re: eaton ho52 Would you sell just the complete third member and gears? Posted via Mobile Device

02-19-2012, 03:46 PM	#13
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: eaton ho52 any interest needs a new home soon. may ship

03-22-2012, 11:40 AM	#15
Shaun1162 Registered User Join Date: Aug 2010 Location: NH Posts: 368	Re: eaton ho52 This still available? What gear are in it? I'd be interested in the 3rd member.. __________________ - 2010 Silverado - 1984 Chevy M1028 (K-30) - 1969 Chevy C-30 - 1933 Ford Stock Car

03-22-2012, 12:07 PM	#16
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: eaton ho52 yes its still availible it has 4.10 gears is an open. drums were just cut new bearings installed and new shoes springs andwheel cylinders

03-22-2012, 09:04 PM	#18
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: eaton ho52 If any one needs GM parts send me the part # and what it is for on the rear end and I have a line for GM Parts Dana 60 especially



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.