NY Parting a '72 Blazer 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ORANGBLAZ · 10-12-2011, 01:56 PM

Parting a '72 Blazer that has been sitting in the woods for like 15 years.
Lynnfield gets first refusal on the original roll bar. Will have some individual pics by Friday.

Rear seat $100 plus shipping.
Bucket seat brackets $100 plus shipping.
Single wall top, overall decent with no cracks, a few small drill holes where side handles were mounted, and chipped on the back corners. Includes glass, mounting brackets, good lights, and a repairable hatch with good arms. $200
Tailgate seal strip very nice and straight $50 plus shipping.
Side seal strips also nice and straight $45 for the pair plus shipping.

Name: 004.jpg
Views: 1852
Size: 77.0 KB

CTENTA1 · 10-12-2011, 02:02 PM

Hows the windshield Frame? Can I get in line for it. Can I see some pics please?

ORANGBLAZ · 10-12-2011, 02:11 PM

Sorry, the windshield frame is junk. Should have mentioned that the body is very rusty.

**1970greenc10** · 10-12-2011, 03:09 PM

How are all 4 rear spring hangers and the rear shock mounts?
Thanks,Marty

Rochlow · 10-12-2011, 04:10 PM

Does it have a heater delete??

**72gmguy** · 10-12-2011, 04:15 PM

Do you ever make it south to the Atlantic City area? If so or if we could meet I would be intersted in the rear seat and the roll bar if it gets to me. Pending price and pics of course.

ORANGBLAZ · 10-12-2011, 07:59 PM

Quote:

Originally Posted by 1970greenc10

How are all 4 rear spring hangers and the rear shock mounts?
Thanks,Marty

Marty, the frame looks pretty good. I will check them out tomorrow or Friday. If they aren't any good, I have another frame that I know has good spring hangers and shock mounts.
(...and isn't Boston, NY kind of an oxymoron?

)

ORANGBLAZ · 10-12-2011, 08:10 PM

Rochlow - no heater delete. Too cold in the Northeast to go w/out heat...brrrr

72 Blazer CST - no console or carpet strips, though I have a few in the shed. One is very nice, and the other two are kinda rusty and beat up. I'll post pics of them and the seal strips later or in the AM.

Monte - Had wagon wheels w/ flat tires. I put the ones that I showed you before on as rollers. They do have 4" back spacing. I'll give you the best two for $80 shipped.

72gmguy - Haven't been to AC in a looong time, but always up for a road trip. I'll post some pics and we'll go from there.

72 Blazer CST · 10-12-2011, 04:11 PM

Are there any carpet strips or a console? I would like to see pictures of the side seal strips whenever you have time. Thanks.

47thriftmaster · 10-12-2011, 07:58 PM

Are the wheels in good shape? What is the back spacing on them? Would be interested in 2 if they are good. Need 4" BS on 15x6 6 lug wheels, if in good shape. Thanks, Monte

72 Blazer CST · 10-12-2011, 08:20 PM

Thank you

Ridnhi · 10-12-2011, 09:13 PM

How much for K/5 Blazer emblems/Pics of them? Do you have any door shims?, I need the piece that mounts to body.

bigrigpardo · 10-12-2011, 09:25 PM

Few questions. What axles are in it. are they 8 or 6 lug. How bad are the doors and what do you want for them. And would you do 100 on the hard top?
Posted via Mobile Device

JBerno · 10-12-2011, 09:25 PM

Can I get in line for the roll bar? Price and pictures of it
Posted via Mobile Device

*454stepside* · 10-12-2011, 09:27 PM

how much for e brake cable from pedal to where it hooks to the rear end cables and any brackets and hooks shipped to 80831

JBerno · 10-12-2011, 09:34 PM

What shape is the chrome trim around the taillights in? Pics of those?
Posted via Mobile Device

**1970greenc10** · 10-12-2011, 10:19 PM

Thanks, (Ya I get that a lot lol, I'll still take the bills over the patriots any day.)

ORANGBLAZ · 10-12-2011, 10:23 PM

Quote:

Originally Posted by 1970greenc10

Thanks, (Ya I get that a lot lol, I'll still take the bills over the patriots any day.)

...or the Yankees over the Red Sox!

ORANGBLAZ · 10-12-2011, 10:21 PM

Ridnhi - Emblems are there, but not great. I do have others though, and will post pics. I will check on the door shims.

bigrigpardo - 6 lug Dana 44 front / 12 bolt rear, no posi, and would guess 3.08 gears as there is no mention of optional gears on the SPID. Doors are really bad, about the worst I've seen. The top does need a little more work than I thought, so I can do $150.

JBerno - no tail light trim, will post pics of roll bar by Friday.

454stepside - I'll check to see if its any good.

firedoger · 10-12-2011, 10:16 PM

How bad are the chips in the rear corners of the top ? I wonder how much it would cost to ship to AZ ?

ORANGBLAZ · 10-12-2011, 10:28 PM

Quote:

Originally Posted by firedoger

How bad are the chips in the rear corners of the top ? I wonder how much it would cost to ship to AZ ?

A small chunk missing on the driver's side, but the passenger side looked pretty good. Did notice today that there is some cracking around one the hatch hinges. I will get some pics by Friday, as we're supposed to get some heavy rain tomorrow. I imagine shipping would be a killer...yikes!

Ridnhi · 10-12-2011, 11:05 PM

If you could send a pic of both sets. and a price on each set i would appreciate it. Im not wanting to put these on my blazer so they don't have to be real nice. thanks, eli

ORANGBLAZ · 10-12-2011, 11:27 PM

Quote:

Originally Posted by Ridnhi

If you could send a pic of both sets. and a price on each set i would appreciate it. Im not wanting to put these on my blazer so they don't have to be real nice. thanks, eli

Will do!

firedoger · 10-12-2011, 10:27 PM

How bad are the chips in the rear corners of the hard top ? I wonder how much it would cost to ship to AZ ?

firedoger · 10-12-2011, 10:28 PM

Woops . I already posted that question. Been a long day.

10-12-2011, 01:56 PM	#1
ORANGBLAZ Registered User Join Date: Jun 2010 Location: Cairo,NY Posts: 353	Parting a '72 Blazer 4x4 Parting a '72 Blazer that has been sitting in the woods for like 15 years. Lynnfield gets first refusal on the original roll bar. Will have some individual pics by Friday. Rear seat $100 plus shipping. Bucket seat brackets $100 plus shipping. Single wall top, overall decent with no cracks, a few small drill holes where side handles were mounted, and chipped on the back corners. Includes glass, mounting brackets, good lights, and a repairable hatch with good arms. $200 Tailgate seal strip very nice and straight $50 plus shipping. Side seal strips also nice and straight $45 for the pair plus shipping. Last edited by ORANGBLAZ; 10-12-2011 at 10:34 PM.

10-12-2011, 02:02 PM	#2
CTENTA1 Registered 1971 K5 Join Date: Dec 2008 Location: SO.CEN.CAL Posts: 428	Re: Parting a '72 Blazer 4x4 Hows the windshield Frame? Can I get in line for it. Can I see some pics please?

10-12-2011, 02:11 PM	#3
ORANGBLAZ Registered User Join Date: Jun 2010 Location: Cairo,NY Posts: 353	Re: Parting a '72 Blazer 4x4 Sorry, the windshield frame is junk. Should have mentioned that the body is very rusty.

10-12-2011, 03:09 PM	#4
1970greenc10 Senior Member Join Date: Oct 2008 Location: Forestville, NY Posts: 225	Re: Parting a '72 Blazer 4x4 How are all 4 rear spring hangers and the rear shock mounts? Thanks,Marty __________________ My Chevys 79 caprice classic 70 c/10 69 k/10 03 silverado

10-12-2011, 04:10 PM	#5
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Parting a '72 Blazer 4x4 Does it have a heater delete??

10-12-2011, 04:15 PM	#6
72gmguy Senior Member Join Date: Mar 2009 Location: Brigantine NJ Posts: 822	Re: Parting a '72 Blazer 4x4 Do you ever make it south to the Atlantic City area? If so or if we could meet I would be intersted in the rear seat and the roll bar if it gets to me. Pending price and pics of course. __________________ Jeremy 1969 Blazer 4x4 original cst 1971 Blazer partial 2wd convert 1972 Blazer 4x4 original cst 1970 Blazer 4x4 w/ 2 1/2in lift and 33in tires w/4 wheel camper 1970 4x4 suburban w/ 6in lift and 35in tires 1968 Corvette convertible 1970 Malibu convertible 1959 Brookwood wagon 1972 International Scout ii

10-12-2011, 08:10 PM	#8
ORANGBLAZ Registered User Join Date: Jun 2010 Location: Cairo,NY Posts: 353	Re: Parting a '72 Blazer 4x4 Rochlow - no heater delete. Too cold in the Northeast to go w/out heat...brrrr 72 Blazer CST - no console or carpet strips, though I have a few in the shed. One is very nice, and the other two are kinda rusty and beat up. I'll post pics of them and the seal strips later or in the AM. Monte - Had wagon wheels w/ flat tires. I put the ones that I showed you before on as rollers. They do have 4" back spacing. I'll give you the best two for $80 shipped. 72gmguy - Haven't been to AC in a looong time, but always up for a road trip. I'll post some pics and we'll go from there. Last edited by ORANGBLAZ; 10-12-2011 at 08:21 PM.

10-12-2011, 04:11 PM	#9
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: Parting a '72 Blazer 4x4 Are there any carpet strips or a console? I would like to see pictures of the side seal strips whenever you have time. Thanks.

10-12-2011, 07:58 PM	#10
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: Parting a '72 Blazer 4x4 Are the wheels in good shape? What is the back spacing on them? Would be interested in 2 if they are good. Need 4" BS on 15x6 6 lug wheels, if in good shape. Thanks, Monte

10-12-2011, 08:20 PM	#11
72 Blazer CST Registered User Join Date: Feb 2011 Location: Washington Posts: 338	Re: Parting a '72 Blazer 4x4 Thank you

10-12-2011, 09:13 PM	#12
Ridnhi Registered User Join Date: Nov 2010 Location: Marion, IL Posts: 719	Re: Parting a '72 Blazer 4x4 How much for K/5 Blazer emblems/Pics of them? Do you have any door shims?, I need the piece that mounts to body. __________________ 1972 K5 Auto 4x4 factory air 2007 Silverado extended cab Z71

10-12-2011, 09:25 PM	#13
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: Parting a '72 Blazer 4x4 Few questions. What axles are in it. are they 8 or 6 lug. How bad are the doors and what do you want for them. And would you do 100 on the hard top? Posted via Mobile Device

10-12-2011, 09:25 PM	#14
JBerno Registered User Join Date: Nov 2010 Location: Louisville, KY Posts: 138	Re: Parting a '72 Blazer 4x4 Can I get in line for the roll bar? Price and pictures of it Posted via Mobile Device __________________ 72' CST K5 Blazer

10-12-2011, 09:27 PM	#15
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: Parting a '72 Blazer 4x4 how much for e brake cable from pedal to where it hooks to the rear end cables and any brackets and hooks shipped to 80831

10-12-2011, 09:34 PM	#16
JBerno Registered User Join Date: Nov 2010 Location: Louisville, KY Posts: 138	Re: Parting a '72 Blazer 4x4 What shape is the chrome trim around the taillights in? Pics of those? Posted via Mobile Device __________________ 72' CST K5 Blazer



Register or Log In To remove these advertisements.

10-12-2011, 10:19 PM	#17
1970greenc10 Senior Member Join Date: Oct 2008 Location: Forestville, NY Posts: 225	Re: Parting a '72 Blazer 4x4 Thanks, (Ya I get that a lot lol, I'll still take the bills over the patriots any day.) __________________ My Chevys 79 caprice classic 70 c/10 69 k/10 03 silverado

10-12-2011, 10:21 PM	#19
ORANGBLAZ Registered User Join Date: Jun 2010 Location: Cairo,NY Posts: 353	Re: Parting a '72 Blazer 4x4 Ridnhi - Emblems are there, but not great. I do have others though, and will post pics. I will check on the door shims. bigrigpardo - 6 lug Dana 44 front / 12 bolt rear, no posi, and would guess 3.08 gears as there is no mention of optional gears on the SPID. Doors are really bad, about the worst I've seen. The top does need a little more work than I thought, so I can do $150. JBerno - no tail light trim, will post pics of roll bar by Friday. 454stepside - I'll check to see if its any good.

10-12-2011, 10:16 PM	#20
firedoger Registered User Join Date: Aug 2011 Location: Phoenix AZ Posts: 141	Re: Parting a '72 Blazer 4x4 How bad are the chips in the rear corners of the top ? I wonder how much it would cost to ship to AZ ?

10-12-2011, 11:05 PM	#22
Ridnhi Registered User Join Date: Nov 2010 Location: Marion, IL Posts: 719	Re: Parting a '72 Blazer 4x4 If you could send a pic of both sets. and a price on each set i would appreciate it. Im not wanting to put these on my blazer so they don't have to be real nice. thanks, eli __________________ 1972 K5 Auto 4x4 factory air 2007 Silverado extended cab Z71

10-12-2011, 10:27 PM	#24
firedoger Registered User Join Date: Aug 2011 Location: Phoenix AZ Posts: 141	Re: Parting a '72 Blazer 4x4 How bad are the chips in the rear corners of the hard top ? I wonder how much it would cost to ship to AZ ?

10-12-2011, 10:28 PM	#25
firedoger Registered User Join Date: Aug 2011 Location: Phoenix AZ Posts: 141	Re: Parting a '72 Blazer 4x4 Woops . I already posted that question. Been a long day.

Register or Log In To remove these advertisements.