CA 1967 and 1968 doors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

heeroyue2002 · 10-20-2011, 05:04 AM

willing to ship!
i may take a day or 2 to do shipping quotes and to send them out. im often busy and i work most of the day and by the time im off post office is closed.

they are empty/stripped. all have speaker holes. i cant really help u with what colors they are. the blue are the 67 btw/

need more pixs? ask!
1968 doors still have trim installed though. the passenger is great but the drivers has crease/dent?

asking $100 passenger 68
$75 drivers 68
drivers 67= $55 it needs work!
passenger 67 = $100

VA72C10 · 10-20-2011, 03:40 PM

GREAT deal! I'd be over in a second for all four if I lived within a couple hours

HeavyMetalChevy · 10-20-2011, 05:26 PM

Quote:

Originally Posted by VA72C10

GREAT deal! I'd be over in a second for all four if I lived within a couple hours

what is the dif... between 67-68 and 69-72 doors... levers??? actuators???? and I know the door handles are diff angles but will they work on all model basically?

heeroyue2002 · 10-20-2011, 05:39 PM

Yea they all interchange. Differeence in handles is just the 67. The 72's are a better design for weather. They are also thicker or something. They require longer shaft on window regulators and door handles. The 68 and up have a Tear drop hole as apposed to the 67's circle hole i believe.

There was also a post that showed the hinges were different along the years/design change
Posted via Mobile Device

HeavyMetalChevy · 10-20-2011, 06:29 PM

Yeah the hinges were very subtle differences I noticed. I believe all the bolt patterns interchange though...

heeroyue2002 · 10-20-2011, 06:39 PM

yeah the hinges do interchange. Bolt pattern is same.
Posted via Mobile Device

HeavyMetalChevy · 10-20-2011, 06:50 PM

Yeah I wish I could get a hold of my buddy in Santa Barbara I would be set... . He tends to "disappear" from time to time but comes back home to indy quite frequent... Good luck man Nice deal to be made here folks!

heeroyue2002 · 10-24-2011, 02:51 AM

ttt

heeroyue2002 · 11-15-2011, 09:11 PM

Ttt
must go!
$250 for all?
Posted via Mobile Device

red69ss · 11-16-2011, 08:53 AM

is the crease/dent in the drivers side 68 the one shown on the inside of the door ? or is there another one on the outside? are there any more issues with the 68 doors? I'm interested in them but shipping might kill the deal. could you get a qoute for both 68 doors shipped to 29720

old Chevy guy · 11-16-2011, 11:24 AM

Id like to see more pictures of the bottoms. Can you tell me how much to ship the two best ones. 1 left and 1 right of course to 02825 Rhode Island?

heeroyue2002 · 11-16-2011, 07:49 PM

None have rst through at the bottoms. Greyhound would probably be thw best way to get them shipped undamaged. They seem to be at a $1 a pound? I took a 110 pound package and got quoted $115 to ship. Red69ss pm me your nearest station to u.

Old chevy guy. The two best doors imo are the 68 pair. One 67 is rough, i believe drivers. I havnt posted new pxs because camera is mia and i yanked the camera out of my iphonw because it shorted.
Posted via Mobile Device

old Chevy guy · 11-17-2011, 01:05 PM

Looking at a whole truck nearby but will have to buy the entire project to get the doors. Any idea how much a stripped out door weighs?

old Chevy guy · 11-17-2011, 04:36 PM

Im very interested in the 68 doors theres a bus terminal in providence I tried to get a quote online but the websiteb would not cooperate. I weighed a complete door without a door panel or handles and it only weighed 55 lbs so im guessing striped out there more like 45. so if You can give me a price shipped I will most likely take them.If the math comes out like I think. let me know asap.

old Chevy guy · 11-17-2011, 04:43 PM

Talked to Greyhound they dont ship to Providence so it would be to Newport RI

heeroyue2002 · 11-17-2011, 11:30 PM

old chevy guy

your in line. i first have to cater red69ss

old Chevy guy · 11-18-2011, 02:57 AM

Thats cool let me know

old Chevy guy · 12-02-2011, 12:02 AM

ever sell these doors?

heeroyue2002 · 12-02-2011, 04:09 AM

sorry guys, the are still up but im moving atm and cant get a quote til im done emptying the house and garage.

red69ss · 12-02-2011, 05:48 PM

just let me know when you have the time ,I'm not in a big hurry, but I deffinently want the doors. thanks

10-20-2011, 05:04 AM	#1
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	1967 and 1968 doors willing to ship! i may take a day or 2 to do shipping quotes and to send them out. im often busy and i work most of the day and by the time im off post office is closed. they are empty/stripped. all have speaker holes. i cant really help u with what colors they are. the blue are the 67 btw/ need more pixs? ask! 1968 doors still have trim installed though. the passenger is great but the drivers has crease/dent? asking $100 passenger 68 $75 drivers 68 drivers 67= $55 it needs work! passenger 67 = $100 __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

10-20-2011, 03:40 PM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 1967 and 1968 doors GREAT deal! I'd be over in a second for all four if I lived within a couple hours __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-20-2011, 05:39 PM	#4
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: 1967 and 1968 doors Yea they all interchange. Differeence in handles is just the 67. The 72's are a better design for weather. They are also thicker or something. They require longer shaft on window regulators and door handles. The 68 and up have a Tear drop hole as apposed to the 67's circle hole i believe. There was also a post that showed the hinges were different along the years/design change Posted via Mobile Device __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

10-20-2011, 06:29 PM	#5
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 1967 and 1968 doors Yeah the hinges were very subtle differences I noticed. I believe all the bolt patterns interchange though... __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

10-20-2011, 06:39 PM	#6
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: 1967 and 1968 doors yeah the hinges do interchange. Bolt pattern is same. Posted via Mobile Device __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

10-20-2011, 06:50 PM	#7
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 1967 and 1968 doors Yeah I wish I could get a hold of my buddy in Santa Barbara I would be set... . He tends to "disappear" from time to time but comes back home to indy quite frequent... Good luck man Nice deal to be made here folks! __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

10-24-2011, 02:51 AM	#8
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: 1967 and 1968 doors ttt __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

11-15-2011, 09:11 PM	#9
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: 1967 and 1968 doors Ttt must go! $250 for all? Posted via Mobile Device __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

11-16-2011, 08:53 AM	#10
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: 1967 and 1968 doors is the crease/dent in the drivers side 68 the one shown on the inside of the door ? or is there another one on the outside? are there any more issues with the 68 doors? I'm interested in them but shipping might kill the deal. could you get a qoute for both 68 doors shipped to 29720 __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

11-16-2011, 11:24 AM	#11
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: 1967 and 1968 doors Id like to see more pictures of the bottoms. Can you tell me how much to ship the two best ones. 1 left and 1 right of course to 02825 Rhode Island?

11-16-2011, 07:49 PM	#12
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: 1967 and 1968 doors None have rst through at the bottoms. Greyhound would probably be thw best way to get them shipped undamaged. They seem to be at a $1 a pound? I took a 110 pound package and got quoted $115 to ship. Red69ss pm me your nearest station to u. Old chevy guy. The two best doors imo are the 68 pair. One 67 is rough, i believe drivers. I havnt posted new pxs because camera is mia and i yanked the camera out of my iphonw because it shorted. Posted via Mobile Device __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

11-17-2011, 01:05 PM	#13
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: 1967 and 1968 doors Looking at a whole truck nearby but will have to buy the entire project to get the doors. Any idea how much a stripped out door weighs?

11-17-2011, 04:36 PM	#14
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: 1967 and 1968 doors Im very interested in the 68 doors theres a bus terminal in providence I tried to get a quote online but the websiteb would not cooperate. I weighed a complete door without a door panel or handles and it only weighed 55 lbs so im guessing striped out there more like 45. so if You can give me a price shipped I will most likely take them.If the math comes out like I think. let me know asap.

11-17-2011, 04:43 PM	#15
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: 1967 and 1968 doors Talked to Greyhound they dont ship to Providence so it would be to Newport RI

11-17-2011, 11:30 PM	#16
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: 1967 and 1968 doors old chevy guy your in line. i first have to cater red69ss __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations



Register or Log In To remove these advertisements.

11-18-2011, 02:57 AM	#17
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: 1967 and 1968 doors Thats cool let me know

12-02-2011, 12:02 AM	#18
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: 1967 and 1968 doors ever sell these doors?

12-02-2011, 04:09 AM	#19
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: 1967 and 1968 doors sorry guys, the are still up but im moving atm and cant get a quote til im done emptying the house and garage. __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

12-02-2011, 05:48 PM	#20
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: 1967 and 1968 doors just let me know when you have the time ,I'm not in a big hurry, but I deffinently want the doors. thanks __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

Register or Log In To remove these advertisements.