![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jul 2011
Location: Livingston, Montana
Posts: 107
|
Parking brake adjustment
I got the light to work but the brake doesn't grab. The brake was serviced recently so I think it's fine inside the drum. The cable under the cab has a lot of play and can flop around. I've read about a bolt/nut to tighten the cable but I'm not seeing it. Can someone tell me what I'm looking for?
Posted via Mobile Device
__________________
84 K10 Custom Deluxe: 350 crate engine w/ 4" lift |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Dec 2009
Location: Gap PA
Posts: 280
|
Re: Parking brake adjustment
The nut/bolt is where [on 1982? and up] the two rear cables from the drums meet together, about 2 feet from the rear axle on the driver's side.
__________________
1991 Mustang GT Vert, T-5 w/ Pro 5.0, Trick Flow upper & lower, BBK cold air intake, 3:73, BAMA chip, etc. 1988 K5 Blazer, [coming soon] TBI 400, SM465/NP208, 12 bolt rear, 3:08's, looks like a 1980. 1998 Jeep Grand Cherokee 4.0 fully loaded daily driver! Where there's a will, there's a rig! |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jul 2011
Location: Livingston, Montana
Posts: 107
|
Re: Parking brake adjustment
I see what you mean I think. Has a bracket with one cable that becomes two...
Posted via Mobile Device
__________________
84 K10 Custom Deluxe: 350 crate engine w/ 4" lift |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Dec 2009
Location: Gap PA
Posts: 280
|
Re: Parking brake adjustment
Yep. The end with one cable going into it should be threaded with a nut on it. Just give it a good tighten. 1/2" wratcheting wrench works wonders!
__________________
1991 Mustang GT Vert, T-5 w/ Pro 5.0, Trick Flow upper & lower, BBK cold air intake, 3:73, BAMA chip, etc. 1988 K5 Blazer, [coming soon] TBI 400, SM465/NP208, 12 bolt rear, 3:08's, looks like a 1980. 1998 Jeep Grand Cherokee 4.0 fully loaded daily driver! Where there's a will, there's a rig! |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jul 2011
Location: Livingston, Montana
Posts: 107
|
Re: Parking brake adjustment
Tightened it up and it's good to go.
Thanks!
__________________
84 K10 Custom Deluxe: 350 crate engine w/ 4" lift |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Dec 2009
Location: Gap PA
Posts: 280
|
Re: Parking brake adjustment
no probs!
__________________
1991 Mustang GT Vert, T-5 w/ Pro 5.0, Trick Flow upper & lower, BBK cold air intake, 3:73, BAMA chip, etc. 1988 K5 Blazer, [coming soon] TBI 400, SM465/NP208, 12 bolt rear, 3:08's, looks like a 1980. 1998 Jeep Grand Cherokee 4.0 fully loaded daily driver! Where there's a will, there's a rig! |
![]() |
![]() |
![]() |
Bookmarks |
|
|