Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
10-20-2011, 11:57 PM | #1 |
Registered User
Join Date: Aug 2011
Location: Wichita, KS
Posts: 318
|
Need some help with noise laws
Hello,
So this evening, I get home from work and my neighbor is up in my face about how "loud" and "fumey" my truck is. My truck does have true dual exhaust going to flowmaster mufflers and it does not smoke. It smells rich at time, but it does not smoke unless something is burning off the manifolds which rarely happens. Basicaly, my Dad approached him about his music playing being too excessive. And the neighbor wanted to vent at me about that and complain about how much he hates my truck and how he hates the fumes coming from it. The neighbor was just grabbing at anything coming out of his butt to use to strengthen his argument. The truck is my daily when I can't / don't want to drive my motorbike. Now that it is getting colder, I really don't care to have frost bite on my hands in the mornings when I go to college. And it is not like I sit out there for hours revving the motor needlessly. If I am working on it, yeah, I'll rev it if I need to. Other than that, I don't usually rev it beyond what it needs. So, if this situation progresses to where the police get involved, my truck will not pass a decibel test. Nor will his music playing. What would I need to do to my truck to keep the noise level down and still keep the Horsepower and not get a potential $1000 ticket or jail time? Thanks.
__________________
Project and Truck Specs: http://67-72chevytrucks.com/vboard/s...d.php?t=483381 |
10-21-2011, 12:19 AM | #2 |
6.0 powered square
Join Date: Feb 2008
Location: Mesquite texas
Posts: 3,459
|
Re: Need some help with noise laws
his panties are in bunch because he was told to turn down his music, but if your truck is really that loud then I would quiet it down, what series flows do you have, what size pipe, and where does the exhaust exit
__________________
Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 |
10-21-2011, 12:26 AM | #3 | |
Registered User
Join Date: Aug 2011
Location: Wichita, KS
Posts: 318
|
Re: Need some help with noise laws
Quote:
The truck has hooker headers w/ 3" collectors. So I am assuming the pipes are 3" as well. I have been trying to find time to fix the collector gasket on the driver side that is blown. I am uncertain as to how much that will affect the noise level. So, if push comes to shove, what would I need to do to my exhaust to quiet it down w/o losing HP? Thanks.
__________________
Project and Truck Specs: http://67-72chevytrucks.com/vboard/s...d.php?t=483381 Last edited by jdheff1982; 10-21-2011 at 12:45 AM. |
|
10-21-2011, 07:20 AM | #4 | |
Registered User
Join Date: May 2007
Location: Moore, Oklahoma
Posts: 2,396
|
Re: Need some help with noise laws
Quote:
Posted via Mobile Device
__________________
Are you retired too? Nonsense! I'm in my prime |
|
10-21-2011, 07:04 AM | #5 |
Registered User
Join Date: Apr 2010
Location: Newcastle, OK
Posts: 1,344
|
Re: Need some help with noise laws
Your going to probably have to go to like a magnaflow muffler or something like that.
|
10-21-2011, 07:49 AM | #6 |
Robert Olson Transport
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,319
|
Re: Need some help with noise laws
if you have a broken collector gasket there prolly are some fumes and noise.. fix that..I bought a flowmaster i think its a turbo and its pretty nice... noise but not enough you cant hear yourself think.
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
10-21-2011, 08:54 AM | #7 |
Registered User
Join Date: Jan 2010
Location: Roanoke, Tx.
Posts: 1,561
|
Re: Need some help with noise laws
I built a 1956 BelAir. It had 350 HP. Two Magna Flows on it. It was not real loud until I punched it. Fix the leaks., and stop bunching it in your neighbor hood.
|
10-21-2011, 09:29 AM | #8 |
Registered User
Join Date: Aug 2011
Location: Wichita, KS
Posts: 318
|
Re: Need some help with noise laws
The noise the neighbor is complaining about is during warm up. For now, I use my foot to get rpm up. It does have a manual choke, but it kills the motor or severely drops rpm even with hi idle adjusted.
This whole thing sucks. This is my first hot rod and I would really like to enjoy it as it is. I have to soak the collector bolts before they will come off. Hopefully tomorrow I will be able to fix the gasket. Posted via Mobile Device
__________________
Project and Truck Specs: http://67-72chevytrucks.com/vboard/s...d.php?t=483381 |
10-21-2011, 11:35 AM | #9 |
Registered User
Join Date: Sep 2010
Location: los angeles
Posts: 1,134
|
Re: Need some help with noise laws
Your neighbor is an ass. Nothing you will do will help.
|
10-21-2011, 11:49 AM | #10 |
Registered User
Join Date: Apr 2010
Location: Newcastle, OK
Posts: 1,344
|
Re: Need some help with noise laws
|
10-29-2011, 04:21 AM | #11 |
Registered User
Join Date: Feb 2011
Location: Boise, ID
Posts: 293
|
Re: Need some help with noise laws
Couldnt agree more. I've got the same kinda situation. I just put new headers, 3" true duals with Flowmaster 40s, no cats. It's definitely loud when I get on it, but at idle it aint nearly as loud as she makes it out to be...some people just have nothing better to do than piss and moan about stupid insignificant crap like that, just to be a nuisance!!
__________________
~Wooden Indian~ 1979 C10 SWB, shaved bed rails, drip rails, tailgate handle. 350 w/ Comp cam, hydraulic lifters, Edelbrock Performer intake, Edelbrock 650 carb, Flowtech headers, Flowmaster 40s, turbo 350 w/stage 2 shift kit...so much fun! |
10-21-2011, 01:25 PM | #12 |
Registered User
Join Date: Aug 2011
Location: Wichita, KS
Posts: 318
|
Re: Need some help with noise laws
If I were to replace my mufflers sometime in the future, what should I be looking for in features to help keep noise down, but HP unchanged?
Thanks.
__________________
Project and Truck Specs: http://67-72chevytrucks.com/vboard/s...d.php?t=483381 |
10-21-2011, 02:10 PM | #13 |
Another Day, Another Dollar
Join Date: Nov 2008
Location: North Vancouver, BC
Posts: 1,316
|
Re: Need some help with noise laws
i had a similar complaint once about my duel 3" big block, and one day when i came out to start my truck all of my lug nuts were lose.
be careful.
__________________
-78 K20 Cheyenne 454 long box, 4" lift, 35" MT's, '84 cab, '80 box "its hip to be square" |
10-21-2011, 03:47 PM | #14 | |
Registered User
Join Date: Feb 2007
Location: Austin, TX
Posts: 3,930
|
Re: Need some help with noise laws
Quote:
For example I live in an apartment. I've been grinding, cutting, and making lots of noise out on my front porch during the day for months now. No complaints and I do it during the day when I figure no one is around or sleeping. Well just right now as I'm building a luggage rack for my bike and I got the wire wheel going full bore, the guy below me come out all pissed off because his baby is sleeping. My first instinct was to say, "well it's 2PM, you can't afford a quiet house and I can't afford a garage so you will have to deal with my few minutes of grinding" but instead I just said "Sorry, I didn't know." I backed down because my bike stays parked right outside their door chained to the stairs. Doesn't work out too good for me to piss them off. Even if this is my only day off for awhile to get this project done.
__________________
1977 GMC Sierra Grande |
|
10-21-2011, 02:18 PM | #15 |
Registered User
Join Date: Aug 2011
Location: Wichita, KS
Posts: 318
|
Re: Need some help with noise laws
Yeah, I worry about someone being stupid as well. On the plus side though, I am a federal gov't employee, so anything done is instantly a federal crime.
__________________
Project and Truck Specs: http://67-72chevytrucks.com/vboard/s...d.php?t=483381 |
10-21-2011, 07:59 PM | #16 | |
Registered User
Join Date: May 2007
Location: Moore, Oklahoma
Posts: 2,396
|
Re: Need some help with noise laws
Quote:
As far as putting 2 high flow Cats on it ---- wouldn't it be less expensive to just get some better mufflers? (It might not need them - it might be the leaky collector) Flowmaster's do not have an infinite life span -- i have a pair of 40 series on my truck that are 5 years old that need to be replaced They use terms like 40 series, super 40, 50 series - and on and on. Check out their website. The 50 series mufflers have a mellower, deeper tone than the 40 series. Magnaflows and Borla have nicer stuff all the way around -- but Flowmaster has great bang for the buck Your not going to lose power by going with a quiet, well engineered muffler --- any power difference between the louder stuff is minuscule and the timing lights at Wichita International won't know the difference
__________________
Are you retired too? Nonsense! I'm in my prime |
|
10-21-2011, 02:33 PM | #17 |
Registered User
Join Date: Jul 2011
Location: Navarre Fl
Posts: 93
|
Re: Need some help with noise laws
your neighbors retarded one (late) night be working on your truck pull them mufflers off and fire that dawg up. rev the piss out of it! hahaha when he comes to beeyatch in the morning ask him how it sounded? when he starts goin off just say well your wife likes it
__________________
82 k10 350sbc, sm465, np205, dana 60 front 14 bolt ff rear 4 inch susp lift 33's aka "MUD SLUT" 2007 cbr 1000rr |
10-27-2011, 02:32 PM | #18 |
Registered User
Join Date: Apr 2010
Location: Granbury ,TX
Posts: 268
|
Re: Need some help with noise laws
I like this one.
[QUOT] ...............when he starts goin off just say well your wife likes it[/QUOTE] Posted via Mobile Device |
10-21-2011, 02:35 PM | #19 |
Registered User
Join Date: Jul 2011
Location: Navarre Fl
Posts: 93
|
Re: Need some help with noise laws
and willett thats when ya go put that guys car on bricks will all 4 flat tires. dont cut them just let all the air out and leave them leaning on his front door so he cant open it. One of my neighbors had my k3500 towed cause it was in the road for a week which it was but its in a neighborhood not a subdevision with any rules it was just parked right in front of my house and she had it towed no warnign or anything. I just changed the oil in my bike and my wifes car and well had to get rid of it and she had a pretty nice lawn with some expensive bushes in it... now theyre gone hahahaha
__________________
82 k10 350sbc, sm465, np205, dana 60 front 14 bolt ff rear 4 inch susp lift 33's aka "MUD SLUT" 2007 cbr 1000rr |
10-27-2011, 07:50 AM | #20 | |
Registered User
Join Date: Jan 2009
Location: Louisville,Ky
Posts: 5,811
|
Re: Need some help with noise laws
Quote:
|
|
10-21-2011, 02:48 PM | #21 |
Registered User
Join Date: Aug 2011
Location: Wichita, KS
Posts: 318
|
Re: Need some help with noise laws
LOL, I don't want to be that drastic. Besides, he keeps his car garaged. I doubt I'll hear anymore about it unless he gets confronted about his music playing being too loud. I sure as hell dont want to get slapped with a $1000 ticket or go to jail over the noise pollution.
I'll figure something out. Might install a pair of high flow cats to help soften the noise.
__________________
Project and Truck Specs: http://67-72chevytrucks.com/vboard/s...d.php?t=483381 |
10-21-2011, 03:53 PM | #22 |
Registered User
Join Date: Sep 2011
Location: Knoxville, Tn
Posts: 408
|
Re: Need some help with noise laws
One of my subdivision neighbors (unknowingly) commented to my wife at the bank their was an "old lifted chevy" that was an eye sore. The only thing wrong with my truck is it's not painted, but no rust or multi color panels or anything. I asked her if she remembered who it was so I could run over his mailbox with my "eye sore".
|
10-21-2011, 08:08 PM | #23 |
Registered User
Join Date: May 2010
Location: laurel hill Fl
Posts: 645
|
Re: Need some help with noise laws
I would check your local laws and at an audio shop have the decibels tested. If it's allowable you in the good. Then make an anonymous call about his music being to loud.
__________________
1985 C10 Custom Deluxe LWB 305/700r4 [ Goldfinger ] 1999 k3500 crew cab dually 6.5tdi/4l80e |
10-21-2011, 08:17 PM | #24 |
Registered User
Join Date: Jul 2010
Location: Southern California CA
Posts: 1,088
|
Re: Need some help with noise laws
wait i know what you can tell him tell him to go lol....... on a serious note it sounds like he's just pissed off about his loud music...
__________________
nOtHiNg LiKe ThE gOoD oLe ChEvYs.... |
10-21-2011, 08:50 PM | #25 |
Registered User
Join Date: Jun 2011
Location: Atlanta ga
Posts: 150
|
Re: Need some help with noise laws
Dealing with neighbors is just a fact of life! Try not to take it personally.
I have been dealing with some punks next door for the last 4 years. I keep hoping that they will move away. The guy is commuting over 1 and 1/2 hours each way to work, so I keep hoping that he will move closer to his work.
__________________
1984 C20, 454, 4 speed named "Gold Member" |
Bookmarks |
|
|