Chambered Vs Straight through mufflers? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

IOWNATRUCK · 10-25-2011, 11:11 PM

Looking for a loud loud loud aggressive sound, Im a fan of popping some I Suppose, but Also like it deep sounding, Just wondering what you guys prefer and are running before I get a new one, Thanks for your opinions!

DetroitDan · 10-26-2011, 01:16 AM

I got Thrush Cherry Bombs for about $22 apiece at Advance Auto. Pretty loud at 2.5 inch straight thru, and it definitely pops when you let off. I've got 4.10s and a 3 speed, so if I let off the gas at pretty much any speed it sounds like you downshifted. Really crackles and pops, sounds pretty bada**. I've got Flowmasters and tailpipes on my Blazer, it won't do it hardly at all, even if you pull it down a gear or two. Sounds mean, but the popping effect is what the cherry bombs are known for.

85gmc2tone · 10-26-2011, 01:30 AM

10 series flows with about 12 to 18 inches from header collector then run 12 to 18 inches out of mufflers and weld on dumps. thats what flowmaster rccomends on the peice of paper that come with the 10's. not for street use is clearly stated. its the closest u can get to open headers

spudz · 10-26-2011, 09:20 AM

Remember, the closer you put the muffler to the engine, the more rasp it will have. So if you like the popping sound. put your mufflers close to the engine. Sounds like you want headers and glasspacks!

Grande Rojo · 10-26-2011, 06:13 PM

I run these on my big block.... very loud but not like flowmasters or glass packs.

http://www.summitracing.com/parts/HOK-21606HKR/

xs-style · 10-26-2011, 07:57 PM

If tomorrow is successful Ill post you a video. I spent today mocking up my exhaust setup. summit headers, about 2 foot of pipe, then thrush glass packs, and another foot or so of pipe before turning down at the axle. Eventually I want to take it up and over the axle and out the back as it was stock. This is my first exhaust setup Ive done myself, so Im not sure if Ill accomplish the up and over tomorrow or not. Anyhow, good luck with getting yours worked out.

ProStreet83C10 · 10-26-2011, 08:06 PM

im gonna run short 12" dynomax bullets right at the collectors....should be loud enough for me

von guido · 10-27-2011, 12:32 PM

just get a set of bullets or if you want a decent sound with the loud check out moroso spiral flows

xs-style · 10-27-2011, 11:16 PM

Well I got it all together today. I have to go out for hangers in the morning. Hopefully the video will be done soon. It was dark by the time I finished tonight.

INSIDIOUS '86 · 10-28-2011, 01:13 AM

spintech, all the raspy sound but diffrent sounding then all the rest, and the cheaper the louder! cause the charge on material not sound like magnaslow and flowbastards

grayharville · 10-28-2011, 12:09 PM

Straight pipes. And keep some cheap mufflers to throw under it at inspection time. I have a 2010 gmc running just cats, with 5 inch tips, I wouldn't have it any other way
Posted via Mobile Device

10-25-2011, 11:11 PM	#1
IOWNATRUCK Registered User Join Date: Oct 2011 Location: Matthews, NC Posts: 129	Chambered Vs Straight through mufflers? Looking for a loud loud loud aggressive sound, Im a fan of popping some I Suppose, but Also like it deep sounding, Just wondering what you guys prefer and are running before I get a new one, Thanks for your opinions!

10-26-2011, 01:16 AM	#2
DetroitDan Registered User Join Date: Dec 2009 Location: Epping, NH Posts: 605	Re: Chambered Vs Straight through mufflers? I got Thrush Cherry Bombs for about $22 apiece at Advance Auto. Pretty loud at 2.5 inch straight thru, and it definitely pops when you let off. I've got 4.10s and a 3 speed, so if I let off the gas at pretty much any speed it sounds like you downshifted. Really crackles and pops, sounds pretty bada**. I've got Flowmasters and tailpipes on my Blazer, it won't do it hardly at all, even if you pull it down a gear or two. Sounds mean, but the popping effect is what the cherry bombs are known for. __________________ 1982 Chevy K30 CCLB fleetside. Formerly a cab and chassis, now a fleetside dually with the rear wheels tucked underneath. 454/th400/np205/C14/D60, 6/4 inch LIFT, not drop.

10-26-2011, 01:30 AM	#3
85gmc2tone Registered User Join Date: Jun 2009 Location: greenwood arkansas Posts: 61	Re: Chambered Vs Straight through mufflers? 10 series flows with about 12 to 18 inches from header collector then run 12 to 18 inches out of mufflers and weld on dumps. thats what flowmaster rccomends on the peice of paper that come with the 10's. not for street use is clearly stated. its the closest u can get to open headers

10-26-2011, 09:20 AM	#4
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: Chambered Vs Straight through mufflers? Remember, the closer you put the muffler to the engine, the more rasp it will have. So if you like the popping sound. put your mufflers close to the engine. Sounds like you want headers and glasspacks! __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

10-26-2011, 06:13 PM	#5
Grande Rojo paper or plastic? Join Date: Nov 2002 Location: SW Missouri Posts: 671	Re: Chambered Vs Straight through mufflers? I run these on my big block.... very loud but not like flowmasters or glass packs. http://www.summitracing.com/parts/HOK-21606HKR/ __________________ 1967 Chevy SWB 250 http://67-72chevytrucks.com/vboard/s...d.php?t=442157 1977 Chevy SWB 454 No More 454 getting 5.3 http://67-72chevytrucks.com/vboard/s...d.php?t=310518 1977 Stepside Truck of the month winner http://67-72chevytrucks.com/vboard/s...d.php?t=135524 1965 Chevy C10 454 http://67-72chevytrucks.com/vboard/s...d.php?t=731372 1975 Dodge Power Wagon http://67-72chevytrucks.com/vboard/s...=1#post7871388

10-26-2011, 07:57 PM	#6
xs-style Registered User Join Date: Mar 2008 Location: Lawndale, NC Posts: 658	Re: Chambered Vs Straight through mufflers? If tomorrow is successful Ill post you a video. I spent today mocking up my exhaust setup. summit headers, about 2 foot of pipe, then thrush glass packs, and another foot or so of pipe before turning down at the axle. Eventually I want to take it up and over the axle and out the back as it was stock. This is my first exhaust setup Ive done myself, so Im not sure if Ill accomplish the up and over tomorrow or not. Anyhow, good luck with getting yours worked out. __________________ 1978 Scottsdale - celebrating 10 years of teaching me profanity 1990 Silverado - bought in Nov. 2016 and it's already catching up - Sold 1987 k5 blazer - sold... :\ seed money for the 81 1981 k20 4x4 - 5.3 swap in progress Events attended: Spring GOG 2011 Dale JR car show Summer 2012 Gathering at Tommys pickup parts

10-26-2011, 08:06 PM	#7
ProStreet83C10 Drag Racer Join Date: Nov 2006 Location: Mason City, Iowa Posts: 1,276	Re: Chambered Vs Straight through mufflers? im gonna run short 12" dynomax bullets right at the collectors....should be loud enough for me __________________ Zach Hall 1983 Chevy C10 R/T: .194 60': 2.322 330: 6.379 1/8: 9.803 MPH: 71.37 1000: 12.781 1/4: 15.314 MPH: 88.79

10-27-2011, 12:32 PM	#8
von guido Registered User Join Date: Sep 2009 Location: outside atlanta Posts: 156	Re: Chambered Vs Straight through mufflers? just get a set of bullets or if you want a decent sound with the loud check out moroso spiral flows __________________ officer,we weren't racing.. he was merely pacing me.

10-27-2011, 11:16 PM	#9
xs-style Registered User Join Date: Mar 2008 Location: Lawndale, NC Posts: 658	Re: Chambered Vs Straight through mufflers? Well I got it all together today. I have to go out for hangers in the morning. Hopefully the video will be done soon. It was dark by the time I finished tonight. __________________ 1978 Scottsdale - celebrating 10 years of teaching me profanity 1990 Silverado - bought in Nov. 2016 and it's already catching up - Sold 1987 k5 blazer - sold... :\ seed money for the 81 1981 k20 4x4 - 5.3 swap in progress Events attended: Spring GOG 2011 Dale JR car show Summer 2012 Gathering at Tommys pickup parts

10-28-2011, 01:13 AM	#10
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: Chambered Vs Straight through mufflers? spintech, all the raspy sound but diffrent sounding then all the rest, and the cheaper the louder! cause the charge on material not sound like magnaslow and flowbastards __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

10-28-2011, 12:09 PM	#11
grayharville ^^who I am^^ what I say> Join Date: Jun 2009 Location: Murchison, Tx Posts: 992	Re: Chambered Vs Straight through mufflers? Straight pipes. And keep some cheap mufflers to throw under it at inspection time. I have a 2010 gmc running just cats, with 5 inch tips, I wouldn't have it any other way Posted via Mobile Device __________________ 70 chevy LWB 350/TH350 Barn find (AKA the 70) http://www.67-72chevytrucks.com/vboa...d.php?t=406364 East Tx Squares



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.