PA WTB Brake Line Brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nds1968 · 10-30-2011, 08:52 PM

I am looking for the right and left side front brake line bracket for a 72 C10. It's the bracket that holds the steel line and the rubber line on the crossmember. You'll have to drill the spot welds, torch or cut around the bracket and I can drill out the spot welds. Thanks, Nate

Pro Metal Shop · 10-30-2011, 09:02 PM

I have a 71 frame, will that be the same ? or not

nds1968 · 10-30-2011, 09:08 PM

Quote:

Originally Posted by Pro Metal Shop

I have a 71 frame, will that be the same ? or not

Its most likely the same since it has factory disc brakes. When do you think you'll be able to check to see if its the same?

Pro Metal Shop · 10-30-2011, 09:18 PM

I will look tomorrow, hopefully my shop will have power restored by then....

nds1968 · 10-30-2011, 09:24 PM

Quote:

Originally Posted by Pro Metal Shop

I will look tomorrow, hopefully my shop will have power restored by then....

We got a little snow but its all gone now, not enough to take out the power

Let me know if you can help me out, price shipped to 15227. Thanks, Nate

Pro Metal Shop · 10-30-2011, 09:38 PM

Will do Nate

Pro Metal Shop · 11-02-2011, 07:47 PM

Hi Nate
The front was taken out from that frame but have another coming in a few weeks and will look at that one. If it has the correct ones I will pull them.... sorry for the delay this week I've just been run over..

nds1968 · 11-02-2011, 08:38 PM

Quote:

Originally Posted by Pro Metal Shop

Hi Nate
The front was taken out from that frame but have another coming in a few weeks and will look at that one. If it has the correct ones I will pull them.... sorry for the delay this week I've just been run over..

Thanks for trying to help out

Thanks, Nate

nds1968 · 11-02-2011, 08:41 PM

Anybody else willing to part with a set of these brackets

I know they will be a pain to get off

but you'll be helping me out big time

I'm going to be sending my frame out for powder coat soon and would like to have these welded on. Thanks, Nate

nds1968 · 11-03-2011, 10:26 PM

ttt

HeavyMetalChevy · 11-03-2011, 11:08 PM

I have a set... Let me get them off tomorrow and I will let you know buddy!

nds1968 · 11-04-2011, 05:54 AM

Quote:

Originally Posted by HeavyMetalChevy

I have a set... Let me get them off tomorrow and I will let you know buddy!

Before you work on getting them off do you want to shoot me a price shipped to 15227. Also can you post a pic to see if we are talking about the same parts. The brackets are spot welded to the front crossmember above the coil springs. Thanks, Nate

nds1968 · 11-05-2011, 02:17 PM

Quote:

Originally Posted by HeavyMetalChevy

I have a set... Let me get them off tomorrow and I will let you know buddy!

Did you get a chance to look for the brackets?

HeavyMetalChevy · 11-05-2011, 02:49 PM

Quote:

Originally Posted by nds1968

Did you get a chance to look for the brackets?

Yeah...looks like this def needs power washed lol

**lolife99** · 11-04-2011, 06:11 AM

If you can't find any,... I would look at something like these:
http://www.summitracing.com/parts/LNG-45283/

Better yet,... just make your own.

**lolife99** · 11-04-2011, 06:13 AM

Or these:
http://www.jegs.com/p/JEGS-Performan...17509/10002/-1

nds1968 · 11-04-2011, 01:01 PM

Quote:

Originally Posted by lolife99

Or these:
http://www.jegs.com/p/JEGS-Performan...17509/10002/-1

Yeah if HeavyMetal doesn't have anything thats the route I'll be going. Thanks, Nate

HeavyMetalChevy · 11-05-2011, 02:50 PM

Are you wanting original parts??? not copping out but you might be better buying new.. By the time it takes to clean up and take off... You know?

nds1968 · 11-05-2011, 02:58 PM

Quote:

Originally Posted by HeavyMetalChevy

Are you wanting original parts??? not copping out but you might be better buying new.. By the time it takes to clean up and take off... You know?

No, I don't need original for the frame. It's not a problem I'll go for the new ones. Thanks, Nate

10-30-2011, 08:52 PM	#1
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	WTB Brake Line Brackets I am looking for the right and left side front brake line bracket for a 72 C10. It's the bracket that holds the steel line and the rubber line on the crossmember. You'll have to drill the spot welds, torch or cut around the bracket and I can drill out the spot welds. Thanks, Nate Attached Images __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

10-30-2011, 09:02 PM	#2
Pro Metal Shop Registered User Join Date: Jun 2009 Location: Danville PA. Posts: 487	Re: WTB Brake Line Brackets I have a 71 frame, will that be the same ? or not __________________ Thanks Steve http://chevylegends.com/forum/index.php

10-30-2011, 09:18 PM	#4
Pro Metal Shop Registered User Join Date: Jun 2009 Location: Danville PA. Posts: 487	Re: WTB Brake Line Brackets I will look tomorrow, hopefully my shop will have power restored by then.... __________________ Thanks Steve http://chevylegends.com/forum/index.php

10-30-2011, 09:38 PM	#6
Pro Metal Shop Registered User Join Date: Jun 2009 Location: Danville PA. Posts: 487	Re: WTB Brake Line Brackets Will do Nate __________________ Thanks Steve http://chevylegends.com/forum/index.php

11-02-2011, 07:47 PM	#7
Pro Metal Shop Registered User Join Date: Jun 2009 Location: Danville PA. Posts: 487	Re: WTB Brake Line Brackets Hi Nate The front was taken out from that frame but have another coming in a few weeks and will look at that one. If it has the correct ones I will pull them.... sorry for the delay this week I've just been run over.. __________________ Thanks Steve http://chevylegends.com/forum/index.php Last edited by Pro Metal Shop; 11-02-2011 at 07:57 PM.

11-02-2011, 08:41 PM	#9
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: WTB Brake Line Brackets Anybody else willing to part with a set of these brackets I know they will be a pain to get off but you'll be helping me out big time I'm going to be sending my frame out for powder coat soon and would like to have these welded on. Thanks, Nate __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

11-03-2011, 10:26 PM	#10
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: WTB Brake Line Brackets ttt __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

11-03-2011, 11:08 PM	#11
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: WTB Brake Line Brackets I have a set... Let me get them off tomorrow and I will let you know buddy! __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-04-2011, 06:11 AM	#15
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: WTB Brake Line Brackets If you can't find any,... I would look at something like these: http://www.summitracing.com/parts/LNG-45283/ Better yet,... just make your own. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-04-2011, 06:13 AM	#16
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: WTB Brake Line Brackets Or these: http://www.jegs.com/p/JEGS-Performan...17509/10002/-1 __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-05-2011, 02:50 PM	#18
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: WTB Brake Line Brackets Are you wanting original parts??? not copping out but you might be better buying new.. By the time it takes to clean up and take off... You know? __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.