WI WTB 12 Bolt 2.76 ring and pinion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

longbed67 · 10-31-2011, 11:23 AM

Looking for a truck 12 bolt 2.76 ring and pinion. If you have one and are looking to part with it let me know. Thanks.

**Captainfab** · 10-31-2011, 11:01 PM

Do you need just the R&P or do you need the carrier too.

longbed67 · 10-31-2011, 11:04 PM

just the ring and pinion, i am going to use a 3 series eaton posi for the carrier.

**Captainfab** · 10-31-2011, 11:16 PM

I'll take another look at the gears I have to be sure they are in good condition. I'll let you know tomorrow.

longbed67 · 10-31-2011, 11:31 PM

that would be great! Thank you. I will need something in good working order as I will be putting a fair amount of power through it, in addition to towing trailers.

**Captainfab** · 11-01-2011, 12:18 AM

You do realize that a 2.76 gear is not a good gear for towing?

longbed67 · 11-02-2011, 06:12 AM

Running a New Process 435 trans out of a 72 c20 that was bolted up to a 350. It is a direct bolt in with the L6 motors and from the sources I found it is rated at something like 300 ft lbs torque at 25000lbs so pretty much indestructible but not a speed shifter either. I am not good at telling whether gears are worn out or not. But I cant see the little bit of pitting going to hurt much.... so I will take it. PM sent.

**Captainfab** · 11-02-2011, 11:11 PM

So you must be figuring on using 1st gear all the time then?

Yeah, I myself wouldn't worry about the little bit of pitting, I've run them like that without issue. I just wanted you to know exactly what I was offering. I'll send you an email.

Quote:

Originally Posted by longbed67

Running a New Process 435 trans out of a 72 c20 that was bolted up to a 350. It is a direct bolt in with the L6 motors and from the sources I found it is rated at something like 300 ft lbs torque at 25000lbs so pretty much indestructible but not a speed shifter either. I am not good at telling whether gears are worn out or not. But I cant see the little bit of pitting going to hurt much.... so I will take it. PM sent.

longbed67 · 11-04-2011, 04:28 PM

Just let me know where I need to send the money via pay pal or however... Thanks.

**Captainfab** · 11-05-2011, 01:17 AM

I'll send you a PM with shipping cost and payment details.

Quote:

Originally Posted by longbed67

Just let me know where I need to send the money via pay pal or however... Thanks.

10-31-2011, 11:23 AM	#1
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	WTB 12 Bolt 2.76 ring and pinion Looking for a truck 12 bolt 2.76 ring and pinion. If you have one and are looking to part with it let me know. Thanks. __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

10-31-2011, 11:01 PM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: WTB 12 Bolt 2.76 ring and pinion Do you need just the R&P or do you need the carrier too. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

10-31-2011, 11:04 PM	#3
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: WTB 12 Bolt 2.76 ring and pinion just the ring and pinion, i am going to use a 3 series eaton posi for the carrier. __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

10-31-2011, 11:16 PM	#4
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: WTB 12 Bolt 2.76 ring and pinion I'll take another look at the gears I have to be sure they are in good condition. I'll let you know tomorrow. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

10-31-2011, 11:31 PM	#5
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: WTB 12 Bolt 2.76 ring and pinion that would be great! Thank you. I will need something in good working order as I will be putting a fair amount of power through it, in addition to towing trailers. __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

11-01-2011, 12:18 AM	#6
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: WTB 12 Bolt 2.76 ring and pinion You do realize that a 2.76 gear is not a good gear for towing? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

11-02-2011, 06:12 AM	#7
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: WTB 12 Bolt 2.76 ring and pinion Running a New Process 435 trans out of a 72 c20 that was bolted up to a 350. It is a direct bolt in with the L6 motors and from the sources I found it is rated at something like 300 ft lbs torque at 25000lbs so pretty much indestructible but not a speed shifter either. I am not good at telling whether gears are worn out or not. But I cant see the little bit of pitting going to hurt much.... so I will take it. PM sent. __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

11-04-2011, 04:28 PM	#9
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: WTB 12 Bolt 2.76 ring and pinion Just let me know where I need to send the money via pay pal or however... Thanks. __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.