|
|
|
11-04-2011, 06:39 PM
|
#1 |
|
Registered User
Join Date: Oct 2011
Location: Austin Texas
Posts: 92
|
1972 LS3 C10 build
Here is the start of my 1972 C10 build. I was not sure I was going to put it out on the site but the information that I got from this site was so helpful that I thought maybe I could help someone in return. I started with a one owner 1972 SWB C10 that my grandfather bought brand new and it only had 30,000 miles on it. Some of you will probably think I am crazy for taking this clean of a truck and doing this build but the bottom line is it still is a 40 year old truck that needed to be rebuilt. I thought about doing a frame off and putting it back original but after thinking about it for a few years decided to build a truck with 21st century parts that would be a fun (with some guts) driver. Now I did not have the time to build the truck myself so I called my friend Rick Jones with RJ Race Cars www.rjracecars.com and asked if he would be interested. Rick built all my Pro Stock cars in the lates 80s and early 90s and we were partners when he raced IHRA Pro Stock. Rick told me "hell ya" we can do it and here starts my build.
|
|
|
|
11-04-2011, 06:43 PM
|
#2 |
|
PROJECT 7DEUCE
 
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,606
|
Re: 1972 LS3 C10 build
Welcome to the borad... That looks to have the highlander package???
__________________
GO BIG GREEN  GO DUCKSMEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
|
|
|
|
11-04-2011, 06:46 PM
|
#3 |
|
Registered User
Join Date: Oct 2011
Location: Austin Texas
Posts: 92
|
Re: 1972 LS3 C10 build
Rick and I decided to go with an air ride suspension and I decided I like ridetech the best. www.ridetech.com
|
|
|
|
|
11-04-2011, 06:52 PM
|
#4 |
|
Registered User
Join Date: Oct 2011
Location: Austin Texas
Posts: 92
|
Re: 1972 LS3 C10 build
I wanted to move the fuel tank out of the cab so I went with a between the frame tank from Boyd Welding. www.boydwelding.com
|
|
|
|
|
11-04-2011, 07:16 PM
|
#5 |
|
Registered User
Join Date: Oct 2011
Location: Austin Texas
Posts: 92
|
Re: 1972 LS3 C10 build
I went with an LS3 motor and 4L85E transmission.
|
|
|
|
|
11-25-2012, 06:40 PM
|
#6 | |
|
*************
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
|
Re: 1972 LS3 C10 build
Quote:
Posted via Mobile Device
__________________
Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 |
|
|
|
|
|
11-25-2012, 07:04 PM
|
#7 | |
|
Registered User
Join Date: Oct 2011
Location: Austin Texas
Posts: 92
|
Re: 1972 LS3 C10 build
Quote:
|
|
|
|
|
|
11-04-2011, 07:26 PM
|
#8 |
|
VA72C10
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,267
|
Re: 1972 LS3 C10 build
Cool build! Neat higlander you started with....hope you didn't trash the seat cover or wheel covers...they're both rare and valuable!
__________________
Looking for a 67-72 swb or blazer project in or around VA. 
|
|
|
|
|
11-04-2011, 08:38 PM
|
#9 |
|
Registered User
Join Date: Oct 2011
Location: Austin Texas
Posts: 92
|
Re: 1972 LS3 C10 build
We have kept everything that came off the truck and will start selling the excess parts in the next few months.
|
|
|
|
|
11-04-2011, 08:54 PM
|
#10 |
|
Registered User
Join Date: Oct 2011
Location: Austin Texas
Posts: 92
|
Re: 1972 LS3 C10 build
A few more before and after tear down pictures.
|
|
|
|
|
11-04-2011, 08:52 PM
|
#11 |
|
Registered User
Join Date: Feb 2007
Location: Cali Central Coast
Posts: 5,191
|
Re: 1972 LS3 C10 build
Clean looking build - Ill be watching. Very nice truck to start with.
__________________
'67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD  Click here to support the board Philippians 4: 6-7 |
|
|
|
|
11-04-2011, 08:57 PM
|
#12 |
|
Registered User
Join Date: Oct 2011
Location: Austin Texas
Posts: 92
|
Re: 1972 LS3 C10 build
Thanks. I was real torn on what to do but I did not want to spend the money to restore and still have a truck that drove like a 72 so I decided to go this direction to keep my grandfathers truck alive but have a nice driver for car club weekends.
|
|
|
|
|
11-04-2011, 09:08 PM
|
#13 |
|
Registered User
Join Date: Oct 2011
Location: Austin Texas
Posts: 92
|
Re: 1972 LS3 C10 build
Wilwood disc brakes all the way around.
|
|
|
|
|
11-04-2011, 09:16 PM
|
#14 |
|
Registered User
Join Date: Oct 2011
Location: Austin Texas
Posts: 92
|
Re: 1972 LS3 C10 build
Moving the gas tank to the rear required a new fuel door be installed in the rear of the bed. Rick found a fuel door from Hagan Street Rods www.haganauto.com that was perfect and of course Rick's guys are some of the best fabricators around so installing it was no problem.
|
|
|
|
|
11-04-2011, 10:07 PM
|
#15 |
|
Registered User
Join Date: Oct 2010
Location: Mocksville,NC
Posts: 419
|
Re: 1972 LS3 C10 build
nice clean truck.
__________________
1991 GMC K2500 4X4 350/auto 1991 Chevy S10 ext cab. 1990 Chevy S10 1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto |
|
|
|
|
11-04-2011, 11:18 PM
|
#16 |
|
Registered User
Join Date: Oct 2011
Location: Austin Texas
Posts: 92
|
Re: 1972 LS3 C10 build
We decided to leave the side molding off and also close up all the stake bed pockets. We installed electric windows and locks from A1 Electric http://www.a1electric.com/ and closed off the key holes on the outside. Rick had to notch the frame for the motor but boxed it back after he got the correct clearance.
|
|
|
|
|
11-05-2011, 11:01 AM
|
#17 |
|
Registered User
Join Date: Oct 2011
Location: Austin Texas
Posts: 92
|
Re: 1972 LS3 C10 build
The body was sandblasted using baking soda so it would not warp the metal.
|
|
|
|
|
11-05-2011, 11:37 AM
|
#18 |
|
Registered User
Join Date: Oct 2011
Location: Austin Texas
Posts: 92
|
Re: 1972 LS3 C10 build
I wanted bucket seats so I could use a console and I found some seats from Procar http://www.procarbyscat.com/Products_Rally.asp that I really liked and they had the option to order them uncovered. They also had a factory frame that the seats bolted to so we did not have to fabricate one but it ended up being too high so Rick lowered it 3". We did not want the seats to stick up above the rear window and we were not going to use the headrest. The truck had a tilt steering wheel with a column shifter but I wanted to move the shifter to the new console we were installing so we installed a ididit steel chrome plated tilt steering column. Rick and his company RJ Race Cars have a great relationship with the Summit Racing http://www.summitracing.com/ folks so we tried to get most of the parts that we needed from them. They also are an associate sponsor for Rick's son Rickie http://www.rjracecars.com/team-information.asp Pro Nitrous car.
 |
|
|
|
|
11-05-2011, 01:06 PM
|
#19 |
|
Registered User
Join Date: Oct 2011
Location: Austin Texas
Posts: 92
|
Re: 1972 LS3 C10 build
I wanted the firewall to be fairly clean so we installed a Vintage Air system. http://www.vintageair.com/ The system uses a different A/C compressor then what came with the accessory package for the LS3 motor so I had to get a bracket from KWiK Performance. http://www.kwikperf.com/ This worked out really nice because it moved the compressor from the bottom to the top of the motor which made the hose installation much easier.
|
|
|
|
|
11-05-2011, 11:04 AM
|
#20 |
|
Registered User
Join Date: Nov 2009
Location: maine
Posts: 2,315
|
Re: 1972 LS3 C10 build
Man beautiful build! What I'd do for that seat and door panels from a 30k mile truck. Beautiful.
Posted via Mobile Device
__________________
1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd. |
|
|
|
|
11-05-2011, 01:29 PM
|
#21 |
|
Registered User
Join Date: Jul 2010
Location: memphis
Posts: 2,537
|
Re: 1972 LS3 C10 build
very sweet build
__________________
1981 C-10 (Pop's) 1978 Camaro 2006 Lacrosse |
|
|
|
|
11-05-2011, 01:41 PM
|
#22 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,064
|
Re: 1972 LS3 C10 build
Fantastic build choices so far for sure. The truck looked SOLID even before you got started. It didn't really look like it needed the 'full' frame resto but it sure doesn't hurt if you have the budget.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
11-05-2011, 02:37 PM
|
#23 |
|
Registered User
Join Date: Oct 2011
Location: Austin Texas
Posts: 92
|
Re: 1972 LS3 C10 build
Your right that it probably did not need the "full" frame resto but I was concerned about having the remodeled bathroom and did not replace the tub look.
|
|
|
|
|
04-03-2012, 10:52 PM
|
#24 |
|
Registered User
Join Date: Dec 2011
Location: winnipeg
Posts: 1,107
|
Re: 1972 LS3 C10 build
Wow what a awesome build!
Posted via Mobile Device |
|
|
|
|
11-05-2011, 02:15 PM
|
#25 |
|
Registered User
Join Date: Oct 2011
Location: Austin Texas
Posts: 92
|
Re: 1972 LS3 C10 build
WHEELS AND TIRES: I want thank everyone who ever posted information about what they used along with providing wheel and tire sizes. The information along with pictures was invaluable in helping make my decision for the wheels and tires as well as sizes. I did not want to tub the rear or cut the front inner wheel wells so I searched and studied for MANY hours on wheels. "Layin frame" was also not a concern for me. I ended up choosing Foose Legend wheels.
Front: F10588073 18x8 with Toyo Proxes STII 255/50R18 Rear: F10528573 20x8.5 with Toyo Proxes STII 265/50R20 The guys at Wheelsforless http://www.wheelsforless.com/ did a great job and they have both the wheels and tires along with offering mounting and balancing which was a nice convenience. |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
