who makes a 5"/7" drop for a 69 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hduramax · 11-04-2011, 08:21 PM

any one know < I am having a little trouble finding one> who makes a 5"/7" drop for a 69 c-10 with springs trying to steer clear of bags thanks for any help

shawno72 · 11-04-2011, 08:27 PM

You could do 6" springs out back with 1" blocks. In front ECE drop spindles and 2" springs will give you a 5 1/2" front and 7" rear.

Lonnie07 · 11-04-2011, 08:32 PM

This is the set up im thinkin about do. does anyone have pics. An can u run the inner wheel well an hows it turn?

shawno72 · 11-04-2011, 09:14 PM

I have run this setup with 15" wheels and p235/70r35 tires with plenty of clearance. You will want to c-notch the rear otherwise you will bottom out the axle tubes on the frame on hard bumps. But as for the front I could do u-turns over speed bumps and not rub. Just make sure you leave the lower control arm bump stops in. By the way ECE aka Early Classic Enterprises will have all you need for this drop. Great guys.

Lonnie07 · 11-07-2011, 08:46 AM

Thanks alot bud

shawno72 · 11-07-2011, 01:16 PM

No problem. Glad to help.

tubbedII · 11-07-2011, 04:59 PM

I think the OP was looking for an all in one kit for a 5/7 drop, and I don't think anyone sells this drop as a kit.

If I were to do a 5/7 and didn't have any parts, I'd do a 3" spindle (swapping the BJ's since the 3" is only available in the 73+ where 72- only go 2.5") with a 2" spring for the front and a 5" spring with a 2" block in the rear including a c-notch, super track bar and shock relocators. I'd like to have the tallest spring in hopes for the best possible ride.

gringoloco · 11-07-2011, 06:19 PM

CPP super slam is as close as you'll get to a full kit
Posted via Mobile Device

Hduramax · 11-07-2011, 10:03 PM

thanks for the help guys

11-04-2011, 08:21 PM	#1
Hduramax Registered User Join Date: Mar 2011 Location: Alto,Mi Posts: 164	who makes a 5"/7" drop for a 69 any one know < I am having a little trouble finding one> who makes a 5"/7" drop for a 69 c-10 with springs trying to steer clear of bags thanks for any help __________________ 2008 HD 2010 Camaro 2ss (The Wife's Ride) 2005 Suzuki GSX-R 1300 "Busa" 1969 C-10 (under Construction) 2013 Sonic LT "LIVE LIFE,TASTE DEATH"

11-04-2011, 08:27 PM	#2
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: who makes a 5"/7" drop for a 69 You could do 6" springs out back with 1" blocks. In front ECE drop spindles and 2" springs will give you a 5 1/2" front and 7" rear. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

11-04-2011, 08:32 PM	#3
Lonnie07 Registered User Join Date: Oct 2011 Location: Seven Valleys, Pa Posts: 2	Re: who makes a 5"/7" drop for a 69 This is the set up im thinkin about do. does anyone have pics. An can u run the inner wheel well an hows it turn?

11-04-2011, 09:14 PM	#4
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: who makes a 5"/7" drop for a 69 I have run this setup with 15" wheels and p235/70r35 tires with plenty of clearance. You will want to c-notch the rear otherwise you will bottom out the axle tubes on the frame on hard bumps. But as for the front I could do u-turns over speed bumps and not rub. Just make sure you leave the lower control arm bump stops in. By the way ECE aka Early Classic Enterprises will have all you need for this drop. Great guys. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

11-07-2011, 08:46 AM	#5
Lonnie07 Registered User Join Date: Oct 2011 Location: Seven Valleys, Pa Posts: 2	Re: who makes a 5"/7" drop for a 69 Thanks alot bud

11-07-2011, 01:16 PM	#6
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: who makes a 5"/7" drop for a 69 No problem. Glad to help. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

11-07-2011, 04:59 PM	#7
tubbedII needs more $$$ Join Date: Mar 2004 Location: Sacramento Posts: 1,936	Re: who makes a 5"/7" drop for a 69 I think the OP was looking for an all in one kit for a 5/7 drop, and I don't think anyone sells this drop as a kit. If I were to do a 5/7 and didn't have any parts, I'd do a 3" spindle (swapping the BJ's since the 3" is only available in the 73+ where 72- only go 2.5") with a 2" spring for the front and a 5" spring with a 2" block in the rear including a c-notch, super track bar and shock relocators. I'd like to have the tallest spring in hopes for the best possible ride. __________________ 1970 2wd Blazer

11-07-2011, 06:19 PM	#8
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: who makes a 5"/7" drop for a 69 CPP super slam is as close as you'll get to a full kit Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-07-2011, 10:03 PM	#9
Hduramax Registered User Join Date: Mar 2011 Location: Alto,Mi Posts: 164	Re: who makes a 5"/7" drop for a 69 thanks for the help guys __________________ 2008 HD 2010 Camaro 2ss (The Wife's Ride) 2005 Suzuki GSX-R 1300 "Busa" 1969 C-10 (under Construction) 2013 Sonic LT "LIVE LIFE,TASTE DEATH"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.