FL FS: MISC Small Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**D.PASSMORE** · 11-16-2011, 08:58 PM

Still cleaning out the garage…

1. NAPA Bearing /Race sets and inner seals for 67-72 2WD front spindles - $40.00 shipped SOLD
2. Aftermarket Steering Bracket - 4x4 - $15.00 SOLD
3. 4x4 Rear lift Blocks – 2.5” - $12.50 shipped SOLD
4. NOS Window regulator – for a 72 van. Nearly identical to 72 trucks- mounting screw holes are slightly different - $15.00 shipped
5. Heat shield – not sure what for - $10.00 shipped
6. Borg/Warner clutch and throughout bearing (USA). This set up was in my Blazer when purchased. No more than 3K highway miles. Plug and play – $40.00 plus shipping
7. SBC - AM ‘72 Harmonic balancer - $15.00 shipped SOLD
8. Two groove/Aluminum H/B pulley – $15.00 shipped
9. OE - 72 Intake manifold / 4BBL – $10.00 pick-up only
10. 69-72 Bug Shield - $5.00 plus shipping
11. Flex fan – 19.5” - $15.00 shipped

Just for Frowns & Grins – shipping is a PIA. So bear with me / I’m not a vendor.

Happy Shopping – Thanks David

**D.PASSMORE** · 11-16-2011, 09:01 PM

More

CaptRMW · 11-16-2011, 09:04 PM

David I will take the window regulator. Are you going to the Turkey Rod Run? Thanks, Roger

**D.PASSMORE** · 11-16-2011, 09:10 PM

Yes I will, be there on Saturday Morning. I'll shoot you my cell... Thanks

tanman722001 · 11-17-2011, 06:40 AM

What size clutch is it?3 speed or 4 speed?Think it will work in my GMC with a grannie 4 in it?

**D.PASSMORE** · 11-17-2011, 07:27 AM

it was used in a 4 SP - SM 465/top loader set-up/stock flywheel. Should'nt be a problem.

tanman722001 · 11-17-2011, 09:16 AM

What would shipping be to zip 27028 on it?

OLEBEATER · 11-17-2011, 09:28 AM

Can you verify the part number of the seals please? Thanks........

**D.PASSMORE** · 11-17-2011, 12:26 PM

Quote:

Originally Posted by olebeater

can you verify the part number of the seals please? Thanks........

#19684

srea76 · 11-17-2011, 09:57 AM

I would love to go to the turkey run one year. How big is it compared to the moultrie swap meet. I am going there on Friday, but hard to make it to Daytona with thanksgiving with family.

**D.PASSMORE** · 11-17-2011, 12:29 PM

Quote:

Originally Posted by srea76

I would love to go to the turkey run one year. How big is it compared to the moultrie swap meet. I am going there on Friday, but hard to make it to Daytona with thanksgiving with family.

Not sure, never been to moultrie swap meet. But, this is inside the Daytona Speedway. Pretty Kool.

I a little south of Jacksonville, FL. Not a long drive from GA.

LUCKTRUCK · 11-17-2011, 02:11 PM

I will take the front stabilizer bracket

**D.PASSMORE** · 11-17-2011, 02:24 PM

Quote:

Originally Posted by LUCKTRUCK

I will take the front stabilizer bracket

Great, I have the second u-bolt. Set, they are AM but fit perfect. Thanks

sboris · 11-17-2011, 07:36 PM

I will take the balancer.

**D.PASSMORE** · 11-19-2011, 09:40 PM

Quote:

Originally Posted by tanman722001

What would shipping be to zip 27028 on it?

Quote:

Originally Posted by sboris

I will take the balancer.

Details sent. Thanks David

**D.PASSMORE** · 11-17-2011, 08:09 PM

Guys, I'll get you shipping quotes and any parts shipped on this Saturday and hopefully get my garage straightened out this weekend... This is half of it

71Sleeper · 11-17-2011, 08:19 PM

I will take bearing set...PM me payment info

**D.PASSMORE** · 11-19-2011, 09:42 PM

Quote:

Originally Posted by 71Sleeper

I will take bearing set...PM me payment info

Info sent. Thanks David

tanman722001 · 11-19-2011, 10:04 PM

David I will have to pass.Sorry for any trouble

sboris · 11-20-2011, 06:49 AM

Payment sent. Thanks

71Sleeper · 11-20-2011, 09:59 AM

PM sent...

**thelonerife** · 11-20-2011, 12:26 PM

I think the 10.00 heat shield is for a big block starter. I have one and its stainless.

**D.PASSMORE** · 11-20-2011, 01:35 PM

Quote:

Originally Posted by thelonerife

I think the 10.00 heat shield is for a big block starter. I have one and its stainless.

Thats what I've been told BB chevy truck. What year - not sure. Good deal for some one.

71Sleeper · 11-21-2011, 09:07 AM

payment sent....Thx Tom

sboris · 12-01-2011, 05:00 PM

Got the balancer. Thanks David

11-16-2011, 09:01 PM	#2
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: FS: MISC Small Parts More Attached Images __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

11-16-2011, 09:04 PM	#3
CaptRMW Custom Sport W/T Join Date: Nov 2010 Location: Tarpon Springs,Fl & Annapolis,Md. ....................Quaint drinking villages with a fishing problem Posts: 898	Re: FS: MISC Small Parts David I will take the window regulator. Are you going to the Turkey Rod Run? Thanks, Roger

11-16-2011, 09:10 PM	#4
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: FS: MISC Small Parts Yes I will, be there on Saturday Morning. I'll shoot you my cell... Thanks

11-17-2011, 06:40 AM	#5
tanman722001 Registered User Join Date: Oct 2010 Location: Mocksville,NC Posts: 419	Re: FS: MISC Small Parts What size clutch is it?3 speed or 4 speed?Think it will work in my GMC with a grannie 4 in it? __________________ 1991 GMC K2500 4X4 350/auto 1991 Chevy S10 ext cab. 1990 Chevy S10 1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto

11-17-2011, 07:27 AM	#6
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: FS: MISC Small Parts it was used in a 4 SP - SM 465/top loader set-up/stock flywheel. Should'nt be a problem.

11-16-2011, 08:58 PM	#1
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	FS: MISC Small Parts Still cleaning out the garage… 1. NAPA Bearing /Race sets and inner seals for 67-72 2WD front spindles - $40.00 shipped SOLD 2. Aftermarket Steering Bracket - 4x4 - $15.00 SOLD 3. 4x4 Rear lift Blocks – 2.5” - $12.50 shipped SOLD 4. NOS Window regulator – for a 72 van. Nearly identical to 72 trucks- mounting screw holes are slightly different - $15.00 shipped 5. Heat shield – not sure what for - $10.00 shipped 6. Borg/Warner clutch and throughout bearing (USA). This set up was in my Blazer when purchased. No more than 3K highway miles. Plug and play – $40.00 plus shipping 7. SBC - AM ‘72 Harmonic balancer - $15.00 shipped SOLD 8. Two groove/Aluminum H/B pulley – $15.00 shipped 9. OE - 72 Intake manifold / 4BBL – $10.00 pick-up only 10. 69-72 Bug Shield - $5.00 plus shipping 11. Flex fan – 19.5” - $15.00 shipped Just for Frowns & Grins – shipping is a PIA. So bear with me / I’m not a vendor. Happy Shopping – Thanks David Attached Images __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie) Last edited by D.PASSMORE; 11-12-2013 at 12:39 PM.

11-17-2011, 09:16 AM	#7
tanman722001 Registered User Join Date: Oct 2010 Location: Mocksville,NC Posts: 419	Re: FS: MISC Small Parts What would shipping be to zip 27028 on it? __________________ 1991 GMC K2500 4X4 350/auto 1991 Chevy S10 ext cab. 1990 Chevy S10 1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto

11-17-2011, 09:28 AM	#8
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: FS: MISC Small Parts Can you verify the part number of the seals please? Thanks........

11-17-2011, 09:57 AM	#10
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	Re: FS: MISC Small Parts I would love to go to the turkey run one year. How big is it compared to the moultrie swap meet. I am going there on Friday, but hard to make it to Daytona with thanksgiving with family. __________________ 1972 Custom Deluxe LT1 Gen V Swap "Green Lantern" 1984 Silverado Red Baron-72 c10 Project

11-17-2011, 02:11 PM	#12
LUCKTRUCK Registered User Join Date: May 2007 Location: new jersey Posts: 610	Re: FS: MISC Small Parts I will take the front stabilizer bracket __________________ LUCKTRUCK

11-17-2011, 07:36 PM	#14
sboris Registered User Join Date: Jun 2011 Location: Osceola, Ia Posts: 2,017	Re: FS: MISC Small Parts I will take the balancer. __________________ Shawn 68 chevy K/20 05 chevy 3/4 4x4 71 short step-sold 71 chevy Beauville van My build. http://67-72chevytrucks.com/vboard/s...d.php?t=633039

11-17-2011, 08:09 PM	#16
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: FS: MISC Small Parts Guys, I'll get you shipping quotes and any parts shipped on this Saturday and hopefully get my garage straightened out this weekend... This is half of it Attached Images __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

11-17-2011, 08:19 PM	#17
71Sleeper Registered User Join Date: Jul 2011 Location: Phenix City, AL Posts: 993	Re: FS: MISC Small Parts I will take bearing set...PM me payment info __________________ 71 Ol' Blue: http://67-72chevytrucks.com/vboard/s...d.php?t=474752 Carving the Jake-olantern: http://67-72chevytrucks.com/vboard/s...d.php?t=679537

11-19-2011, 10:04 PM	#19
tanman722001 Registered User Join Date: Oct 2010 Location: Mocksville,NC Posts: 419	Re: FS: MISC Small Parts David I will have to pass.Sorry for any trouble __________________ 1991 GMC K2500 4X4 350/auto 1991 Chevy S10 ext cab. 1990 Chevy S10 1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto

11-20-2011, 06:49 AM	#20
sboris Registered User Join Date: Jun 2011 Location: Osceola, Ia Posts: 2,017	Re: FS: MISC Small Parts Payment sent. Thanks __________________ Shawn 68 chevy K/20 05 chevy 3/4 4x4 71 short step-sold 71 chevy Beauville van My build. http://67-72chevytrucks.com/vboard/s...d.php?t=633039



Register or Log In To remove these advertisements.

11-20-2011, 09:59 AM	#21
71Sleeper Registered User Join Date: Jul 2011 Location: Phenix City, AL Posts: 993	Re: FS: MISC Small Parts PM sent... __________________ 71 Ol' Blue: http://67-72chevytrucks.com/vboard/s...d.php?t=474752 Carving the Jake-olantern: http://67-72chevytrucks.com/vboard/s...d.php?t=679537

11-20-2011, 12:26 PM	#22
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: FS: MISC Small Parts I think the 10.00 heat shield is for a big block starter. I have one and its stainless. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

11-21-2011, 09:07 AM	#24
71Sleeper Registered User Join Date: Jul 2011 Location: Phenix City, AL Posts: 993	Re: FS: MISC Small Parts payment sent....Thx Tom __________________ 71 Ol' Blue: http://67-72chevytrucks.com/vboard/s...d.php?t=474752 Carving the Jake-olantern: http://67-72chevytrucks.com/vboard/s...d.php?t=679537

12-01-2011, 05:00 PM	#25
sboris Registered User Join Date: Jun 2011 Location: Osceola, Ia Posts: 2,017	Re: FS: MISC Small Parts Got the balancer. Thanks David __________________ Shawn 68 chevy K/20 05 chevy 3/4 4x4 71 short step-sold 71 chevy Beauville van My build. http://67-72chevytrucks.com/vboard/s...d.php?t=633039

Register or Log In To remove these advertisements.