OH parts 72 custom/30 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fwells67 · 11-17-2011, 11:20 PM

my son-inlaw bought this in while i was in the hospital and gave me the bucket seats but everything else is for sale and he will be pulling parts off this weekend. has factory buckets/tach/402-4 speed/ no-spin rear and it runs very good he drove it about 100 miles home when he bought it. truck has 79,588 orig miles and has been on the farm since new. he also got the orig no spin rear axle booklet and paperwork

**70shortfleet** · 11-17-2011, 11:27 PM

Put me in line on the tach and steering wheel

fwells67 · 11-17-2011, 11:32 PM

Quote:

Originally Posted by 70shortfleet

Put me in line on the tach and steering wheel

everything works on this truck and the tach face is excellent. the wheel has no cracks but the grain on the center is worn some. must have been where they held there hand all the time

fwells67 · 11-17-2011, 11:35 PM

i am not able to check it out but he will be taking off and inspecting all parts this weekend. i will let everyone know the condition and prices when everything is checked out better since i have only glanced at the truck

**DeadheadNM** · 11-17-2011, 11:29 PM

Interested in the oil press gauge if 80 lb

**DeadheadNM** · 11-17-2011, 11:30 PM

Also interested in the dash if in excellent shape. Thanks.

teeitup · 11-17-2011, 11:31 PM

Manual throttle if good. Thanks Randy

fwells67 · 11-17-2011, 11:45 PM

Quote:

Originally Posted by teeitup

Manual throttle if good. Thanks Randy

i will know for sure this weekend but he told me it was complete i just called him about the truck

teeitup · 11-17-2011, 11:48 PM

Thanks no rush, its for my project. Take care of yourself. Thanks Randy

**zicc1835** · 11-17-2011, 11:31 PM

ill take the door panels and the passenger side inner fender well if its solid
thanks

**zicc1835** · 11-18-2011, 07:59 PM

Just checking to see if I am first in line on the passenger inner fender and door panels let me know con diction or pics and p m me with pay info
Thanks
Jess

Quote:

Originally Posted by zicc1835

ill take the door panels and the passenger side inner fender well if its solid
thanks

Posted via Mobile Device

fwells67 · 11-19-2011, 01:27 AM

Quote:

Originally Posted by zicc1835

just checking to see if i am first in line on the passenger inner fender and door panels let me know con diction or pics and p m me with pay info
thanks
jess

posted via mobile device

yes you are first up on these parts from this truck. I will post you some pics when they are pulled

**zicc1835** · 11-19-2011, 01:28 AM

Quote:

Originally Posted by zicc1835

Just checking to see if I am first in line on the passenger inner fender and door panels let me know con diction or pics and p m me with pay info
Thanks
Jess

Posted via Mobile Device

Posted via Mobile Device

Nohatch · 11-17-2011, 11:32 PM

You have all the parts im looking for!! I may be interested in the engine and door panels! let me know what the price is. Thanks

fwells67 · 11-17-2011, 11:43 PM

Quote:

Originally Posted by Nohatch

You have all the parts im looking for!! I may be interested in the engine and door panels! let me know what the price is. Thanks

i do know he told me $500 is what he wants for the motor carb to pan and i have a few sets of door panels

hatred · 11-22-2011, 10:32 PM

Quote:

Originally Posted by fwells67

i do know he told me $500 is what he wants for the motor carb to pan and i have a few sets of door panels

Can the motor mounts/stands be included with this price?

**tll74** · 11-23-2011, 01:42 AM

Would like to get the following pending availability, price and condition.

complete carpet that seals off the gas tank behind the seats.
factory jack, handle with bag, and lug wrench.
engine wiring.
fan shroud.
oil pressure line from firewall to engine.
fan clutch.
exhaust heat shield mounted to cab on RH side.
Starter heat shield.
all seat belts.
heater controls even with bad levers but solid housing.

please put me in line for the following:
exhaust heat shield and tube
console
underdash wiring
mirrors

Thanks, Tom

**DeadheadNM** · 11-17-2011, 11:36 PM

Sorry - are the defrost vents in good shape?

Saw your post about the VA and hope you feel better soon.

fwells67 · 11-17-2011, 11:50 PM

Quote:

Originally Posted by DeadheadNM

Sorry - are the defrost vents in good shape?

Saw your post about the VA and hope you feel better soon.

thanks these treatments i have to have get me under the weather for a few days after i get them but i will have him check them out for you unless i can get out there tommorrow myself

**DeadheadNM** · 11-18-2011, 01:08 AM

Quote:

Originally Posted by fwells67

thanks these treatments i have to have get me under the weather for a few days after i get them but i will have him check them out for you unless i can get out there tommorrow myself

I appreciate your effort and no rush. If the defrost vents are medium olive and intact I'll take them. When possible, let me know what shape this dash pad is in. Maybe I'll take this one too. Also, if the chrome vent windows are in better shape than those on your C20 let me know - I'd like an excellent pair. Best, Pete

slammer72 · 11-18-2011, 01:25 AM

If deadhead passes on the dashpad ill take it....he doesnt need two of em anyway:-)
Posted via Mobile Device

BBrendal · 11-18-2011, 02:54 AM

In line for tach.

My72BB · 11-18-2011, 09:43 PM

I am interested in price on complete clutch linkage including bracket on motor, bell crank, clutch rod...etc.

Also, how much for bellhousing and transmission?

I would be able to pick up so no shipping would be involved on transmission.

Thanks, Alan

gmclonghorn · 11-22-2011, 03:26 PM

I'm interested in the cab roof. if you can cut at pillars and the back , i'm interested in using the cab roof on my truck. let me know on price thanks. also any detailed pictures of the roof. also would be interested in the cab clearance lights , wiring and switch if it has one. Or does it just turn on with the front lights? what are the condition of lights?thanks

gmclonghorn · 11-22-2011, 08:12 PM

I'm interested in the no spin axle booklet. Let me know the cost thanks mike
Posted via Mobile Device

11-17-2011, 11:20 PM	#1
fwells67 Registered User Join Date: Mar 2011 Location: columbus ohio Posts: 302	parts 72 custom/30 my son-inlaw bought this in while i was in the hospital and gave me the bucket seats but everything else is for sale and he will be pulling parts off this weekend. has factory buckets/tach/402-4 speed/ no-spin rear and it runs very good he drove it about 100 miles home when he bought it. truck has 79,588 orig miles and has been on the farm since new. he also got the orig no spin rear axle booklet and paperwork Attached Images

11-17-2011, 11:27 PM	#2
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,239	Re: parts 72 custom/30 Put me in line on the tach and steering wheel

11-17-2011, 11:35 PM	#4
fwells67 Registered User Join Date: Mar 2011 Location: columbus ohio Posts: 302	Re: parts 72 custom/30 i am not able to check it out but he will be taking off and inspecting all parts this weekend. i will let everyone know the condition and prices when everything is checked out better since i have only glanced at the truck

11-17-2011, 11:29 PM	#5
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: parts 72 custom/30 Interested in the oil press gauge if 80 lb __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

11-17-2011, 11:30 PM	#6
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: parts 72 custom/30 Also interested in the dash if in excellent shape. Thanks. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

11-17-2011, 11:31 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parts 72 custom/30 Manual throttle if good. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-17-2011, 11:48 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parts 72 custom/30 Thanks no rush, its for my project. Take care of yourself. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-17-2011, 11:31 PM	#10
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,298	Re: parts 72 custom/30 ill take the door panels and the passenger side inner fender well if its solid thanks __________________ Grand Theft Auto https://67-72chevytrucks.com/vboard/...d.php?t=855961 Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

11-17-2011, 11:32 PM	#14
Nohatch Registered User Join Date: Jul 2006 Location: Ohio Posts: 83	Re: parts 72 custom/30 You have all the parts im looking for!! I may be interested in the engine and door panels! let me know what the price is. Thanks

11-23-2011, 01:42 AM	#17
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: parts 72 custom/30 Would like to get the following pending availability, price and condition. complete carpet that seals off the gas tank behind the seats. factory jack, handle with bag, and lug wrench. engine wiring. fan shroud. oil pressure line from firewall to engine. fan clutch. exhaust heat shield mounted to cab on RH side. Starter heat shield. all seat belts. heater controls even with bad levers but solid housing. please put me in line for the following: exhaust heat shield and tube console underdash wiring mirrors Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

11-17-2011, 11:36 PM	#18
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: parts 72 custom/30 Sorry - are the defrost vents in good shape? Saw your post about the VA and hope you feel better soon. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

11-18-2011, 01:25 AM	#21
slammer72 Registered User Join Date: Oct 2011 Location: Gresham oregon Posts: 309	Re: parts 72 custom/30 If deadhead passes on the dashpad ill take it....he doesnt need two of em anyway:-) Posted via Mobile Device

11-18-2011, 02:54 AM	#22
BBrendal Recalculating..... Join Date: Nov 2010 Location: New Lenox Il Posts: 686	Re: parts 72 custom/30 In line for tach. __________________ Brian - (BBrendal) 1969 Chevy Camaro Z28 1972 Chevy Blazer CST 2004 GMC Yukon (The truck that pulls the car trailer) 1972 Chevy Blazer CST #2 (Finished and sold!) Blazer build link... http://s1213.photobucket.com/albums/...rendal/Blazer/

11-18-2011, 09:43 PM	#23
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: parts 72 custom/30 I am interested in price on complete clutch linkage including bracket on motor, bell crank, clutch rod...etc. Also, how much for bellhousing and transmission? I would be able to pick up so no shipping would be involved on transmission. Thanks, Alan

11-22-2011, 03:26 PM	#24
gmclonghorn Registered User Join Date: Mar 2011 Location: Westminster, Ca Posts: 1,104	Re: parts 72 custom/30 I'm interested in the cab roof. if you can cut at pillars and the back , i'm interested in using the cab roof on my truck. let me know on price thanks. also any detailed pictures of the roof. also would be interested in the cab clearance lights , wiring and switch if it has one. Or does it just turn on with the front lights? what are the condition of lights?thanks



Register or Log In To remove these advertisements.

11-22-2011, 08:12 PM	#25
gmclonghorn Registered User Join Date: Mar 2011 Location: Westminster, Ca Posts: 1,104	Re: parts 72 custom/30 I'm interested in the no spin axle booklet. Let me know the cost thanks mike Posted via Mobile Device

Register or Log In To remove these advertisements.