MN WTB: parts for a 72 K20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vintage Windmills · 11-22-2011, 09:27 PM

Need whatever is missing from the following pictures:
Pulleys, fan, shroud, alt brackets, air cleaner assembly.

All must be good driver or better and proper for a 72k20.

teeitup · 11-22-2011, 10:14 PM

Jud, I have the alt brackets, air cleaner, should have the pullies this coming week.

Livrat · 11-22-2011, 10:53 PM

Jud, To make up what Randy can not help you out with.
I have the following, a complete set of pulleys and brackets all media blasted and painted with either a cast crank ps pulley or the stamped steel version, also have the air cleaner also media blasted and painted semi gloss black, the air cleaner riser with hose and spark arrestor, A pristine fan shroud,possibly a clutch fan

jeremy zander · 11-22-2011, 10:57 PM

I am sure I have all that stuff as well...Also the receiver ($165) and 72 hood and hinges($50)....We can run out to the farm,just tell me when your available...I have a garage spot all cleaned out when your ready to sell this one.....J.Z.

Vintage Windmills · 11-23-2011, 01:10 AM

Randy, Please send/post some pics and prices if you could. Thanks!

Mark, shoot me a price on the fan shroud and and clutch at least

Jeremy, let me check over that hood again I will take it assuming no dents or rust. Also, there is guy from Minnetonka that is considering selling two K20's. i have his number at the office I will pass on to you. THink I'll keep this K20 at least until I find the 70 K20.

Livrat · 11-23-2011, 11:55 AM

Quote:

Originally Posted by Vintage Windmills

Randy, Please send/post some pics and prices if you could. Thanks!

Mark, shoot me a price on the fan shroud and and clutch at least

Jeremy, let me check over that hood again I will take it assuming no dents or rust. Also, there is guy from Minnetonka that is considering selling two K20's. i have his number at the office I will pass on to you. THink I'll keep this K20 at least until I find the 70 K20.

Jud, I will dig it out today and take a real close look to make sure it was as pristine as I remember, I will also get some pictures and post them this eve

teeitup · 11-23-2011, 01:30 PM

Yes its going to be sucking the gas down like normal, a tank a gas every truck I go get unfortunately

Livrat · 11-24-2011, 03:30 PM

Jud, Here are a few pictures of the fan shroud, It is as nice as I remembered..
$150 shipped

Livrat · 11-24-2011, 03:32 PM

more pictures

**special-K** · 11-23-2011, 07:51 AM

I have everything but the shroud if other deals don't go through.

teeitup · 11-23-2011, 09:07 AM

I'll get pics this afternoon Jud. I have four 71-72 trucks bought I'll be hauling in this weekend, surely one of those will have the right pullies. Thanks Randy

Vintage Windmills · 11-23-2011, 09:26 AM

Randy, any of those 4x4's or is there no difference between 2x4 and 4x4 pulleys. I know the fan shroud is deeper. I'd prefer from a 72 unless there are no year specific codes on the parts.

teeitup · 11-23-2011, 09:40 AM

Jud, sorry no 4x4's but am looking at a 72 blazer, if the guy would ever send me pics. Pullies are the same as far as I know

Vintage Windmills · 11-23-2011, 09:56 AM

Wow, 4 trucks coming in! You're making the 6.0 work for a living huh!

Vintage Windmills · 11-24-2011, 08:17 PM

Mark,

I will take it assuming its part number 3951922 and has no cracks or splits. Thanks! Did you have a fan clutch as well?

Livrat · 11-25-2011, 01:13 AM

Yes, no splits or cracks, Not sure on the part number, will confirm tomorrow (I didn't know there is more than one V8 4X4 shroud) this is off of a 72 K20.
I totally forgot about the fan. I will make sure to look tomorrow at work

teeitup · 11-25-2011, 11:09 AM

Jud, here is the air cleaner and alt brackets, on the alt brackets the arm is the shorter one, I've had 4x4's with short and long arms.

Livrat · 11-25-2011, 11:01 PM

Jud,
Yes the part number is #3951922..
no good on the fan, All the ones I have are big block (19 inch) and will not clear the 4X4 fan shroud (they use a 17 inch)
Mark

Vintage Windmills · 11-26-2011, 12:35 PM

Mark, please PM me payment info. I'll pay for the shroud now to get that locked down but maybe don't ship for a week or two until we find out what pulleys Randy has.

I do have a 70 C/10 I'll be parting at some point, do you think that fan would be the right one? I don't even know if there is date code I need to worry about on the fan stuff?

Thanks!
Jud

Livrat · 11-26-2011, 09:13 PM

Sending PM,
No worries on holding off on shipping for a bit.
The 70 C10 if its an AC truck may have a correct clutch fan, most I have seen had a standard 4 bladed fan, I have a couple of those if you need, I have seen some fans with part numbers and date codes and some without, I think its a hit n miss there.

Vintage Windmills · 11-28-2011, 12:47 AM

Randy, how much $ for that stuff. Do you know if the air cleaner is for a 4x4. I read here that it is lower profile but that was just one post, maybe you or Mark knows for sure. I really need to get a parts book for 1972.

Livrat · 11-28-2011, 01:00 AM

Jud,
I just looked at all my 69-72 air cleaners (10) and they all have the same profile, just some with the thermactor air door and some without. I do have several different heights of spacers but can not tell you for sure what came out of what,

teeitup · 11-28-2011, 09:32 AM

Jud, air cleaner and spacer is $15 alt brackets are $25 plus shipping. I'll compare air cleaner and spacer to my blazers. Thanks Randy

teeitup · 11-28-2011, 11:52 PM

Jud, air cleaner and spacer are the same size as one on my blazer

teeitup · 11-28-2011, 11:53 PM

Also misquoted on alt brackets $15, I also found a long upper

11-22-2011, 09:27 PM	#1
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	WTB: parts for a 72 K20 Need whatever is missing from the following pictures: Pulleys, fan, shroud, alt brackets, air cleaner assembly. All must be good driver or better and proper for a 72k20. Attached Images __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

11-22-2011, 10:14 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB: parts for a 72 K20 Jud, I have the alt brackets, air cleaner, should have the pullies this coming week. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-22-2011, 10:57 PM	#4
jeremy zander Registered User Join Date: Oct 2005 Location: shakopee minnesota Posts: 515	Re: WTB: parts for a 72 K20 I am sure I have all that stuff as well...Also the receiver ($165) and 72 hood and hinges($50)....We can run out to the farm,just tell me when your available...I have a garage spot all cleaned out when your ready to sell this one.....J.Z. __________________ WTB 1972 CHEVY 3/4 4X4 1971 chevy c30 4x4 NAPCO (project) 1972 chevy 3/4 4x4 350/350 4spd, tach, tow hooks,radio delete,heat delete,hubcaps,lockers 1972 chevy 3/4 4x4 383/350 dads original farm truck tilt,tach,tow hooks,hubcaps,radio delete,heat delete 2006 chevy LBZ crew cab duramax,4 inch,beadlocks 2015 chevy tahoe Z71 my fifth one,love em 2016 chevy 2500HD Z71 LTZ duramax midnite 2018 chevy suburban Z71 midnite

11-23-2011, 01:10 AM	#5
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: WTB: parts for a 72 K20 Randy, Please send/post some pics and prices if you could. Thanks! Mark, shoot me a price on the fan shroud and and clutch at least Jeremy, let me check over that hood again I will take it assuming no dents or rust. Also, there is guy from Minnetonka that is considering selling two K20's. i have his number at the office I will pass on to you. THink I'll keep this K20 at least until I find the 70 K20. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

11-23-2011, 01:30 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB: parts for a 72 K20 Yes its going to be sucking the gas down like normal, a tank a gas every truck I go get unfortunately __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-22-2011, 10:53 PM	#3
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: WTB: parts for a 72 K20 Jud, To make up what Randy can not help you out with. I have the following, a complete set of pulleys and brackets all media blasted and painted with either a cast crank ps pulley or the stamped steel version, also have the air cleaner also media blasted and painted semi gloss black, the air cleaner riser with hose and spark arrestor, A pristine fan shroud,possibly a clutch fan

11-24-2011, 03:30 PM	#8
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: WTB: parts for a 72 K20 Jud, Here are a few pictures of the fan shroud, It is as nice as I remembered.. $150 shipped Attached Images

11-24-2011, 03:32 PM	#9
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: WTB: parts for a 72 K20 more pictures Attached Images

11-23-2011, 07:51 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: WTB: parts for a 72 K20 I have everything but the shroud if other deals don't go through. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-23-2011, 09:07 AM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB: parts for a 72 K20 I'll get pics this afternoon Jud. I have four 71-72 trucks bought I'll be hauling in this weekend, surely one of those will have the right pullies. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-23-2011, 09:26 AM	#12
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: WTB: parts for a 72 K20 Randy, any of those 4x4's or is there no difference between 2x4 and 4x4 pulleys. I know the fan shroud is deeper. I'd prefer from a 72 unless there are no year specific codes on the parts. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

11-23-2011, 09:40 AM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB: parts for a 72 K20 Jud, sorry no 4x4's but am looking at a 72 blazer, if the guy would ever send me pics. Pullies are the same as far as I know __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-23-2011, 09:56 AM	#14
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: WTB: parts for a 72 K20 Wow, 4 trucks coming in! You're making the 6.0 work for a living huh! __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

11-24-2011, 08:17 PM	#15
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: WTB: parts for a 72 K20 Mark, I will take it assuming its part number 3951922 and has no cracks or splits. Thanks! Did you have a fan clutch as well? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

11-25-2011, 01:13 AM	#16
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: WTB: parts for a 72 K20 Yes, no splits or cracks, Not sure on the part number, will confirm tomorrow (I didn't know there is more than one V8 4X4 shroud) this is off of a 72 K20. I totally forgot about the fan. I will make sure to look tomorrow at work



Register or Log In To remove these advertisements.

11-25-2011, 11:09 AM	#17
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB: parts for a 72 K20 Jud, here is the air cleaner and alt brackets, on the alt brackets the arm is the shorter one, I've had 4x4's with short and long arms. Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-25-2011, 11:01 PM	#18
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: WTB: parts for a 72 K20 Jud, Yes the part number is #3951922.. no good on the fan, All the ones I have are big block (19 inch) and will not clear the 4X4 fan shroud (they use a 17 inch) Mark

11-26-2011, 12:35 PM	#19
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: WTB: parts for a 72 K20 Mark, please PM me payment info. I'll pay for the shroud now to get that locked down but maybe don't ship for a week or two until we find out what pulleys Randy has. I do have a 70 C/10 I'll be parting at some point, do you think that fan would be the right one? I don't even know if there is date code I need to worry about on the fan stuff? Thanks! Jud __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

11-26-2011, 09:13 PM	#20
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: WTB: parts for a 72 K20 Sending PM, No worries on holding off on shipping for a bit. The 70 C10 if its an AC truck may have a correct clutch fan, most I have seen had a standard 4 bladed fan, I have a couple of those if you need, I have seen some fans with part numbers and date codes and some without, I think its a hit n miss there.

11-28-2011, 12:47 AM	#21
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: WTB: parts for a 72 K20 Randy, how much $ for that stuff. Do you know if the air cleaner is for a 4x4. I read here that it is lower profile but that was just one post, maybe you or Mark knows for sure. I really need to get a parts book for 1972. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

11-28-2011, 01:00 AM	#22
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: WTB: parts for a 72 K20 Jud, I just looked at all my 69-72 air cleaners (10) and they all have the same profile, just some with the thermactor air door and some without. I do have several different heights of spacers but can not tell you for sure what came out of what,

11-28-2011, 09:32 AM	#23
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB: parts for a 72 K20 Jud, air cleaner and spacer is $15 alt brackets are $25 plus shipping. I'll compare air cleaner and spacer to my blazers. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 11-28-2011 at 11:54 PM.

11-28-2011, 11:52 PM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB: parts for a 72 K20 Jud, air cleaner and spacer are the same size as one on my blazer __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-28-2011, 11:53 PM	#25
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB: parts for a 72 K20 Also misquoted on alt brackets $15, I also found a long upper __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.