caddy tail light question

[55metalmonkey]

I've seen an image of 89-93 caddy tail lights frenched into the rear stake pockets on a TF truck, but can't seem to find any image of it done. I google searched it and searched the forum and still can't find it, I know it's been done
I'm contemplating doing it on my truck but would like to see what it looks like before I start gathering parts to do it.

Any help finding a pic would be great

Thanks

[Kim57]

Like these?

It's in this thread.
http://67-72chevytrucks.com/vboard/s...d.php?t=481598
Kim

[lt155ruck]

Originally Posted by 55metalmonkey

I've seen an image of 89-93 caddy tail lights frenched into the rear stake pockets on a TF truck, but can't seem to find any image of it done. I google searched it and searched the forum and still can't find it, I know it's been done
I'm contemplating doing it on my truck but would like to see what it looks like before I start gathering parts to do it.

Any help finding a pic would be great

Thanks

How about in a modified 58-59 fleetside box?

[55metalmonkey]

Yes thats very close to the ones I thought I looked at before, now to decied if thats the way I want to go with it and see if I can come up with a roll pan that looks good with the lights

Thanks

[lt155ruck]

Originally Posted by 55metalmonkey

Yes thats very close to the ones I thought I looked at before, now to decied if thats the way I want to go with it and see if I can come up with a roll pan that looks good with the lights

Thanks

How about a pic of your truck or what you are thinking of putting them into? Just wondering if I have seen your truck around town.

[55metalmonkey]

Originally Posted by lt155ruck

How about a pic of your truck or what you are thinking of putting them into? Just wondering if I have seen your truck around town.

You probably haven't seen it around yet, I've been working on it since I bought it just over a year ago. I'll post a few pics. I almost have it ready for paint. I'm on hold till my buddy and I get his 67 Firebird done then it goes to his shop in Sooke.
this is the vid of the frame after I did the subframe

My 1955 GMC truck... work in progress -...

and a few pics the first two are when I first bought it, it looks better in the pics than it really was, lots of hidden hack work. The last two are from a few weeks ago when I rounded the rear corners of the box and got the front bumper straight. the rear is basicly un modified except the rounded box edges so I'm still not sure if the caddy lights will work with the look. might just set in a couple sets of behives in the roll pan but am open to any ideas out there.. one thing I know is I'd like to stay away from LEDs not because I don't like them on some trucks I just don't think they suit this project

[lt155ruck]

Looks sweet, keep up the great work. If you are looking for a different rear suspension setup. I've got a Rbs Obsolete rear leaf setup for sale.

[meter swinger]

Originally Posted by lt155ruck

How about in a modified 58-59 fleetside box?

Uhhh, im in love. You got any more pics of that thing?
Posted via Mobile Device

[lt155ruck]

Originally Posted by meter swinger

Uhhh, im in love. You got any more pics of that thing?
Posted via Mobile Device

Which? my daughters hot rod? or the truck? Here is a quick link. I Just got it back from paint so the reassembly begins. http://67-72chevytrucks.com/vboard/s...340046&page=14

[meter swinger]

Originally Posted by lt155ruck

Which? my daughters hot rod? or the truck? Here is a quick link. I Just got it back from paint so the reassembly begins. http://67-72chevytrucks.com/vboard/s...340046&page=14

Well the hot rod of course! The bed looks really nice. Looks like a lot of metal work to get the spears out. Love the suspension set up too. That will be awesome when its done.
Posted via Mobile Device

[lt155ruck]

Originally Posted by meter swinger

Well the hot rod of course! The bed looks really nice. Looks like a lot of metal work to get the spears out. Love the suspension set up too. That will be awesome when its done.
Posted via Mobile Device

It was quite a bit. From just above where the spear would be, all the way to the bottom is hammer and dollied and english wheeled to build a new side.A new wheelwell was formed aswell, along with a new rear cap where the lights were sunk. The tailgate is a GMC one with the rolled open oval, but with the GMC removed. It latches with a couple pins that are attached to oval Lokar interior door handle pulls, On the inside of the tailgate. Here is a link to an unmodified tailgate. http://www.nolimitparts.com/prodinfo.asp?number=110601 and the handles http://www.lokar.com/product-pgs/int...orhandles.html the are on the inside of the gate.

[lt155ruck]

Originally Posted by meter swinger

Well the hot rod of course! The bed looks really nice. Looks like a lot of metal work to get the spears out. Love the suspension set up too. That will be awesome when its done.
Posted via Mobile Device

And ofcourse