69 Chevy "Work In Progress" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

robs_c10 · 12-04-2011, 12:48 AM

Hey guys/gals I just signed up for this forum last week but have been following this website for a year now. I have been working on my truck for over a year now and just wanted to share some pictures with you guys to see what you thought. I have a full set of autometer gauges coming in and a complete gasket kit ordered as well. Beingactive duty military time is limited but its getting there....Cheers.....

robs_c10 · 12-04-2011, 12:54 AM

More

robs_c10 · 12-04-2011, 12:56 AM

And more.....I will work on it more and post pics as I go...CHEERS!!!

gearys 5600 · 12-04-2011, 01:05 AM

Lookin good !!

**fakerwade** · 12-04-2011, 02:46 AM

Looks real good,,,,maybe tell us a little more about what you've done. (pictures don't always tell the whole story, ya know?)

robs_c10 · 12-04-2011, 03:54 AM

Well I original bought it to drive around and enjoy. Well I then decided to build the engine in it so she could be a beast on the streat. One thing lead to the next and it turned into a frame off restoration. Thing so far:
Rear suspension completely redone. Shocks, c-notch, lowering springs.
Cab was all rusted so I found this one for 300. Did the vin swap. Working on new seals.
Changed it from column to floor shift.
All new gauges
Going to do carpet
Have touched front end yet. But plan on spindles, springs, shocks.
Engine is a built 355 out of a 89 silverado. I called summit and told them what I wanted and they built a package which I have not yet drove on the street.
Don't know what else. Lately it's been deciding on things to do as I go and when I have money....
Posted via Mobile Device

**fakerwade** · 12-04-2011, 03:58 PM

Did you replace the floor in the cab or is it just painted up nice?

robs_c10 · 12-04-2011, 06:28 PM

I had to replace the drivers side corner section.... Then painted it up nice...
Posted via Mobile Device

**fakerwade** · 12-05-2011, 04:12 AM

Good job!

72LSK10 · 12-05-2011, 09:06 AM

Very nice, keep up the good work

**67cheby** · 12-05-2011, 11:39 AM

cool project , i like the wheels Boyd's ?

robs_c10 · 12-05-2011, 03:40 PM

Yeah their boyd's. Believe it or not they actually came with the truck. Favorite part of the truck. well for now. LOL

robs_c10 · 12-10-2011, 05:57 PM

Just got finished with painting the door. Not to bad for a spray can. I am finding out that painting in the winter time is a pain in the but. One quick trip to homedepot for a propane heater did the trick. However keeping the garage closed to paint is a high you dont need. So went back to homedepot and have a new respirator now which is awesome.

robs_c10 · 12-29-2011, 01:02 PM

Ok as I said in a different post I am on back order for some dang parts so I went on with what I had avaliable. Finished both doors except linkage, and windows "waiting on vent window gaskets", finished gauge bezel except "waiting on speedo", and now i am doing the heat shied/sound material. Man doing this is very time consuming but will be nice when I am finished. The work continues and I have carpet already but need to get it out of the box and get it in once I am finished with the shield.

robs_c10 · 12-29-2011, 01:04 PM

And the last set of pictures I have...More to come when I get the carpet in and other things completed as well.

808_67C10 · 12-29-2011, 03:17 PM

I like that black with the white face guages... looks sick!!!

robs_c10 · 12-29-2011, 05:21 PM

Thanks brother. I was hesitant about it at first but like the almost finished outcome.
Posted via Mobile Device

808_67C10 · 01-05-2012, 06:33 PM

I think I am gonna do the same thing... ha ha

I just realized you were in Hanford... I was at NAS Lemoore about 9-10 years ago...

robs_c10 · 01-05-2012, 07:02 PM

Do it up man. All those gauges plus speedo as you see it ran me 500 shipped through egauges.com which I thought was a smokin deal. Oh yeah I have been working on tht base since early 2000.
Posted via Mobile Device

robs_c10 · 04-04-2012, 11:14 AM

Some updated pictures from my build. The bed is almost complete and ready to put back on frame. Just some other minor work underneath and then undercoat which is on its way. Then some other images from other side jobs I completed when it was too late around the neighborhood to be grinding.

robs_c10 · 04-04-2012, 11:16 AM

These fenders were cut for I would imagine some really big rims and tires. So I brought them back to factory look.

aussie67c10 · 04-26-2012, 10:57 AM

Looking good keep up the good work

Bromax · 04-27-2012, 10:14 PM

Agreed the gauges are ridiculously cool. good look.

robs_c10 · 04-28-2012, 12:42 AM

Thanks man... I can't wait to see them all working... Hopefully in a few weeks...
Posted via Mobile Device

RexDodge · 04-28-2012, 10:15 AM

First and foremost thank you your service to our country

...and nice job on the truck! Keep pecking at it...

12-04-2011, 12:48 AM	#1
robs_c10 Registered User Join Date: Nov 2011 Location: Hanford, Ca Posts: 86	69 Chevy "Work In Progress" Hey guys/gals I just signed up for this forum last week but have been following this website for a year now. I have been working on my truck for over a year now and just wanted to share some pictures with you guys to see what you thought. I have a full set of autometer gauges coming in and a complete gasket kit ordered as well. Beingactive duty military time is limited but its getting there....Cheers..... Attached Images

12-04-2011, 12:54 AM	#2
robs_c10 Registered User Join Date: Nov 2011 Location: Hanford, Ca Posts: 86	Re: 69 Chevy "Work In Progress" More Attached Images

12-04-2011, 12:56 AM	#3
robs_c10 Registered User Join Date: Nov 2011 Location: Hanford, Ca Posts: 86	Re: 69 Chevy "Work In Progress" And more.....I will work on it more and post pics as I go...CHEERS!!! Attached Images

12-04-2011, 01:05 AM	#4
gearys 5600 Registered User Join Date: Mar 2010 Location: tulsa,ok Posts: 1,085	Re: 69 Chevy "Work In Progress" Lookin good !! __________________ MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=423629 1969 custom/10 swb--SOLD 1968 swb 50th anniv.--SOLD 1967 camaro ss/rs..LS-6-speed, 16-year long project 1956 chevy nomad 1955 chevy 210 2-dr sedan 1978 el-camino ss 1-owner

12-04-2011, 02:46 AM	#5
fakerwade Senior Member Join Date: Oct 2011 Location: Lewiston, ID. Posts: 627	Re: 69 Chevy "Work In Progress" Looks real good,,,,maybe tell us a little more about what you've done. (pictures don't always tell the whole story, ya know?) __________________ Wade , JUST WALK AWAY, AND I'LL SPARE YOUR LIVES!!! , Build thread "TANGERINE" http://67-72chevytrucks.com/vboard/s...d.php?t=498570 Board Members Met: bigblock68, ol_skool_chevy ,68TT,atvpro

12-04-2011, 03:54 AM	#6
robs_c10 Registered User Join Date: Nov 2011 Location: Hanford, Ca Posts: 86	Re: 69 Chevy "Work In Progress" Well I original bought it to drive around and enjoy. Well I then decided to build the engine in it so she could be a beast on the streat. One thing lead to the next and it turned into a frame off restoration. Thing so far: Rear suspension completely redone. Shocks, c-notch, lowering springs. Cab was all rusted so I found this one for 300. Did the vin swap. Working on new seals. Changed it from column to floor shift. All new gauges Going to do carpet Have touched front end yet. But plan on spindles, springs, shocks. Engine is a built 355 out of a 89 silverado. I called summit and told them what I wanted and they built a package which I have not yet drove on the street. Don't know what else. Lately it's been deciding on things to do as I go and when I have money.... Posted via Mobile Device

12-04-2011, 03:58 PM	#7
fakerwade Senior Member Join Date: Oct 2011 Location: Lewiston, ID. Posts: 627	Re: 69 Chevy "Work In Progress" Did you replace the floor in the cab or is it just painted up nice? __________________ Wade , JUST WALK AWAY, AND I'LL SPARE YOUR LIVES!!! , Build thread "TANGERINE" http://67-72chevytrucks.com/vboard/s...d.php?t=498570 Board Members Met: bigblock68, ol_skool_chevy ,68TT,atvpro

12-04-2011, 06:28 PM	#8
robs_c10 Registered User Join Date: Nov 2011 Location: Hanford, Ca Posts: 86	Re: 69 Chevy "Work In Progress" I had to replace the drivers side corner section.... Then painted it up nice... Posted via Mobile Device

12-05-2011, 04:12 AM	#9
fakerwade Senior Member Join Date: Oct 2011 Location: Lewiston, ID. Posts: 627	Re: 69 Chevy "Work In Progress" Good job! __________________ Wade , JUST WALK AWAY, AND I'LL SPARE YOUR LIVES!!! , Build thread "TANGERINE" http://67-72chevytrucks.com/vboard/s...d.php?t=498570 Board Members Met: bigblock68, ol_skool_chevy ,68TT,atvpro

12-05-2011, 09:06 AM	#10
72LSK10 Registered User Join Date: Oct 2011 Location: Long Beach, CA Posts: 127	Re: 69 Chevy "Work In Progress" Very nice, keep up the good work

12-05-2011, 11:39 AM	#11
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 69 Chevy "Work In Progress" cool project , i like the wheels Boyd's ? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-05-2011, 03:40 PM	#12
robs_c10 Registered User Join Date: Nov 2011 Location: Hanford, Ca Posts: 86	Re: 69 Chevy "Work In Progress" Yeah their boyd's. Believe it or not they actually came with the truck. Favorite part of the truck. well for now. LOL

12-10-2011, 05:57 PM	#13
robs_c10 Registered User Join Date: Nov 2011 Location: Hanford, Ca Posts: 86	Re: 69 Chevy "Work In Progress" Just got finished with painting the door. Not to bad for a spray can. I am finding out that painting in the winter time is a pain in the but. One quick trip to homedepot for a propane heater did the trick. However keeping the garage closed to paint is a high you dont need. So went back to homedepot and have a new respirator now which is awesome. Attached Images

12-29-2011, 01:02 PM	#14
robs_c10 Registered User Join Date: Nov 2011 Location: Hanford, Ca Posts: 86	Re: 69 Chevy "Work In Progress" Ok as I said in a different post I am on back order for some dang parts so I went on with what I had avaliable. Finished both doors except linkage, and windows "waiting on vent window gaskets", finished gauge bezel except "waiting on speedo", and now i am doing the heat shied/sound material. Man doing this is very time consuming but will be nice when I am finished. The work continues and I have carpet already but need to get it out of the box and get it in once I am finished with the shield. Attached Images

12-29-2011, 01:04 PM	#15
robs_c10 Registered User Join Date: Nov 2011 Location: Hanford, Ca Posts: 86	Re: 69 Chevy "Work In Progress" And the last set of pictures I have...More to come when I get the carpet in and other things completed as well. Attached Images



Register or Log In To remove these advertisements.

12-29-2011, 03:17 PM	#16
808_67C10 Registered User Join Date: Sep 2011 Location: Hilo, Hawaii Posts: 1,051	Re: 69 Chevy "Work In Progress" I like that black with the white face guages... looks sick!!! __________________ Frank (Hilo, Hawaii) Trucks, Tacos, and Beer go together like Peanut Butter and Ladies! 85 C/10 SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=760383 67 C/10 SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=489298 79 K5 Blazer SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=657461

12-29-2011, 05:21 PM	#17
robs_c10 Registered User Join Date: Nov 2011 Location: Hanford, Ca Posts: 86	Re: 69 Chevy "Work In Progress" Thanks brother. I was hesitant about it at first but like the almost finished outcome. Posted via Mobile Device

01-05-2012, 06:33 PM	#18
808_67C10 Registered User Join Date: Sep 2011 Location: Hilo, Hawaii Posts: 1,051	Re: 69 Chevy "Work In Progress" I think I am gonna do the same thing... ha ha I just realized you were in Hanford... I was at NAS Lemoore about 9-10 years ago... __________________ Frank (Hilo, Hawaii) Trucks, Tacos, and Beer go together like Peanut Butter and Ladies! 85 C/10 SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=760383 67 C/10 SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=489298 79 K5 Blazer SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=657461

01-05-2012, 07:02 PM	#19
robs_c10 Registered User Join Date: Nov 2011 Location: Hanford, Ca Posts: 86	Re: 69 Chevy "Work In Progress" Do it up man. All those gauges plus speedo as you see it ran me 500 shipped through egauges.com which I thought was a smokin deal. Oh yeah I have been working on tht base since early 2000. Posted via Mobile Device

04-04-2012, 11:14 AM	#20
robs_c10 Registered User Join Date: Nov 2011 Location: Hanford, Ca Posts: 86	Re: 69 Chevy "Work In Progress" Some updated pictures from my build. The bed is almost complete and ready to put back on frame. Just some other minor work underneath and then undercoat which is on its way. Then some other images from other side jobs I completed when it was too late around the neighborhood to be grinding. Attached Images

04-04-2012, 11:16 AM	#21
robs_c10 Registered User Join Date: Nov 2011 Location: Hanford, Ca Posts: 86	Re: 69 Chevy "Work In Progress" These fenders were cut for I would imagine some really big rims and tires. So I brought them back to factory look. Attached Images

04-26-2012, 10:57 AM	#22
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 69 Chevy "Work In Progress" Looking good keep up the good work __________________ BOWTIE OR NO-TIE

04-27-2012, 10:14 PM	#23
Bromax Registered User Join Date: Apr 2012 Location: Phenix City Alabama Posts: 20	Re: 69 Chevy "Work In Progress" Agreed the gauges are ridiculously cool. good look.

04-28-2012, 12:42 AM	#24
robs_c10 Registered User Join Date: Nov 2011 Location: Hanford, Ca Posts: 86	Re: 69 Chevy "Work In Progress" Thanks man... I can't wait to see them all working... Hopefully in a few weeks... Posted via Mobile Device

04-28-2012, 10:15 AM	#25
RexDodge Registered User Join Date: Apr 2008 Location: Oregon City, Oregon Posts: 741	Re: 69 Chevy "Work In Progress" First and foremost thank you your service to our country ...and nice job on the truck! Keep pecking at it...

Register or Log In To remove these advertisements.