What radio to use?

[wibas]

My dash has been modifeid with hammer and chisel by someone to install a single din radio. I have a section from another dash that has good radio opening. I'm not sure if I want to do the surgery for the stock radio or if I want to do something different. What are you guys doing about radio? What model do you call a 1952GMC? Thanks

[mr48chev]

My dash is going to be all changed around with a different dash with custom instrument panel so that doesn't help but I am planning on a swing down cover to hide the radio's face panel. I'd repair the dash, use a radio delete plate and then make a panel to hold the radio to go under the dash or maybe a console to go up in the roof to hold the radio up out of sight from most eyes.

[parkwood]

This a dash in a '55 chevy using a custom auto sound radio... if you fix your dash it would look like this...

[Maximus]

I think by his first post he has a 52' gmc, so his Advance Design dash would obviously be different.
To answer the original question I personally would restore it to the original form, but it completely depends on what your plans with your truck are, good luck!

[parkwood]

Originally Posted by Maximus

I think by his first post he has a 52' gmc, so his Advance Design dash would obviously be different.
To answer the original question I personally would restore it to the original form, but it completely depends on what your plans with your truck are, good luck!

Thanks Maximus, didn't see the '52 line... in that case i can only show you a '51 with the stock block off plate, but we still used the custom auto sound r.adio that you can hide anywhere

[54 jimmy]

heres mine 54 gmc. had an extra speaker grill so i modifyed it to fit my radio.

[BlueJeep]

i plan to use my Droid for Pandora in my truck and run it through an amp that I'll mount under the seat.

Originally Posted by parkwood

Thanks Maximus, didn't see the '52 line... in that case i can only show you a '51 with the stock block off plate, but we still used the custom auto sound r.adio that you can hide anywhere

Parkwood, this is off topic but that under dash unit is different than the "standard" vintage air unit, was that a custom order thing from V/A? I believe the standard has those cheap looking knobs.

[wibas]

Hey Parkwood both those are good looking dashes. Is that a custom audio sound radio in the 55 dash? Does custom audio sound also make the hidden radio? Is that what you are using in the 51 dash? Thanks. Scott

[parkwood]

Originally Posted by wibas

Hey Parkwood both those are good looking dashes. Is that a custom audio sound radio in the 55 dash? Does custom audio sound also make the hidden radio? Is that what you are using in the 51 dash? Thanks. Scott

Scott, yes both are from Custom Auto Sound.. the one in the '55 we also added a CD player behind the the seat.
On the '51 we put the unit under the seat and the face of the radio in the glove box.. the '51 came with an iPod hook up.

[booger1949]

put the speaker face on a hinge an build a 2 inch box an install on the back side of the dash, i did mine 2 inchs so u have a place to put keys r the remote for the radio, when you close the speaker face nobody will see the radio, if u get a radio with a remote u can work it with the speaker face closed

[S10Fan]

I went with XM radio in my 50. Made a backing plate out of some ABS plastic, bolted it in place where the radio knobs would go. the XM unit is held in place with double sided tape. An old Pioneer amp under the seat provides power to a pair of 6X9's behind the seat. A volume control from PAC (LC-1) keeps the tunes at the correct level. I can move the XM unit from car to car, I love it.

[booger1949]

heres 2 pics that should give u an idea

[hopped up]

i would go with a hinged radio delete plate to keep it looking factory . and put a radio with an ipod hookup behind it. nobody uses cds anymore.
Posted via Mobile Device

[OrrieG]

Look at kustombrads thread, he made a slick opening center dash grille.

[S10Fan]

Originally Posted by OrrieG

Look at kustombrads thread, he made a slick opening center dash grille.

Link?

[OrrieG]

Originally Posted by S10Fan

Link?

Search function will find it but here is a link that shows the door. Earlier in the thread he has more detail.

http://67-72chevytrucks.com/vboard/s...&postcount=403

[S10Fan]

Originally Posted by OrrieG

Search function will find it but here is a link that shows the door. Earlier in the thread he has more detail.

http://67-72chevytrucks.com/vboard/s...&postcount=403

Tried searching, came up empty handed, thanks for the link!

[renegade6]

I think it depends what look you are going for. If you want to go custom, I would fill and smooth it otherwise use the delete plate.

[bfink]

gear drive , big solid-lifter cam and flowmasters turned down under the bed .....i dont think im even gonna put a radio in !

[wibas]

Hey guys thanks for the input!

[solidaxel]

Originally Posted by bfink

gear drive , big solid-lifter cam and flowmasters turned down under the bed .....i dont think im even gonna put a radio in !

............ YES, that is the SAME one I used in both of my trucks !!!
Except for the 4" megs I used for exhaust tips!

[wibas]

Thanks for the input. I patched the damage with a piece from anothe ND dash. Now I need to find a suitable radio. After doing some searching I wished I would have smoothed the radio hole. I have not found a suitable radio to fit the original opening. Any ideas on what brand to use???????