CA WTB: 4k Mechanical Tach & Lens

[burnitg]

I am collecting parts for a diesel conversion and am looking for a 4k mechanical tach and a lens with ammeter, water temperature and oil pressure.

Thanks,
Burnett

[PT'S 70 CST]

Get in touch with board member Livrat. He had two of the made one for me and one for him. He can give you the details. You will have a very hard time finding one of these.


PT

[w314speed]

I have a mechanical tach. Not sure of the rpm. I will check in the AM and let you know. Thanks, Dan

[PT'S 70 CST]

If he wants the lens then I may be interested in the rest.


Thanks PT

[Leroy-B1]

there was one in my buddies private yard will check on it when I return but will be around the first of the year

[w314speed]

Here are the pics of the redline mechanical tach. Nice original color. $80 shipped. LMK Thanks, Dan

Had to use old camera and old computer, newer one has problems. If I get iy up I'll post better pics.

[PT'S 70 CST]

Hey Dan I do not want to hijack his thread but I am building this dash for a board member and his face is a little tarnished and bent. I will check with him and see if he wants to take a look at it. If you could I would like some better pics of the face where the screw holes are, it looks like they may be a little over torqued but it is hard to tell.


Thanks PT

[w314speed]

Originally Posted by PT'S 70 CST

Hey Dan I do not want to hijack his thread but I am building this dash for a board member and his face is a little tarnished and bent. I will check with him and see if he wants to take a look at it. If you could I would like some better pics of the face where the screw holes are, it looks like they may be a little over torqued but it is hard to tell.


Thanks PT

Out of respect for burnitg's thread, we will allow him to respond. Parts- they are what they are! I have other used and NOS tachs for gas and they all have flex marks around the screws, maybe ever so slight, but they are there. The used seem to be more pronounced, probably from the handling and positioning as we build the clusters, we handle the face plate to position, etc. I assume the face could be removed, straightened and maybe a micro thin flat washer installed between the housing and face plate to buffer the torque of the two screws.

Thanks for your input. Dan

[burnitg]

Dan:
I will take the tach. Please PM me with payment info.
Thanks,
Burnett

[PT'S 70 CST]

Good deal guys and sorry thread hijack but I was only inquiring on the parts if you (bunitg) were not interested. Glad it worked out.


PT

[w314speed]

PM sent. Thanks, Dan

[burnitg]

I'm still looking for the lens. I will consider tach + lens if you don't want to split them up.

Thanks,
Burnett