FL KYB front lowering shocks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 12-23-2011, 12:07 PM

I switched to a shorter shock. These have less than 2K miles on them. $45 shipped CONUS.

R/

shawno72 · 12-23-2011, 12:32 PM

Will they fit 3" lowered springs. I'll take them if they do.

**Hart_Rod** · 12-23-2011, 12:54 PM

Quote:

Originally Posted by shawno72

Will they fit 3" lowered springs. I'll take them if they do.

I think so. Here's the part # KYB 344068. You should probably do some research just to make sure.

R/

shawno72 · 12-23-2011, 01:25 PM

Quote:

Originally Posted by Hart_Rod

I think so. Here's the part # KYB 344068. You should probably do some research just to make sure.

R/

Ok I'll get on the research right now. Keep me in line.

shawno72 · 12-23-2011, 01:31 PM

According to the Summit website it states that these are for stock height vehicles. Did you experience a problem with them and that's why you are going with a lower shock?

**Hart_Rod** · 12-23-2011, 07:33 PM

Quote:

Originally Posted by shawno72

According to the Summit website it states that these are for stock height vehicles. Did you experience a problem with them and that's why you are going with a lower shock?

They worked fine until I lowered the front end more - 4". I'm pretty sure they are not stock height as ECE sells them with their dropped spring kits. I would take some measurements and compare them to the expanded and compressed length of the shock. Here's a picture. Let me know. They also come with a set of new upper shock studs.

R/

shawno72 · 12-23-2011, 07:36 PM

Ignore the PM. If you could take some measurements I am extremely interested. What I have is 3" drop springs and plan to install drop spindles in the next few months to follow. I know that the spindles don't change anything with the shocks.

**Hart_Rod** · 12-23-2011, 07:48 PM

Quote:

Originally Posted by shawno72

Ignore the PM. If you could take some measurements I am extremely interested. What I have is 3" drop springs and plan to install drop spindles in the next few months to follow. I know that the spindles don't change anything with the shocks.

What measurements do you want?

shawno72 · 12-23-2011, 07:54 PM

Quote:

Originally Posted by Hart_Rod

What measurements do you want?

The compressed and extended measurements would be great. Thanks.

**Hart_Rod** · 12-23-2011, 08:01 PM

Extended - 15"
Compresssed - 9 3/4"

shawno72 · 12-23-2011, 08:03 PM

Hey Rob forget all the fuss and pm me your paypal if you do paypal. They are better than what I got so I'll take them.

**Hart_Rod** · 12-23-2011, 08:11 PM

Quote:

Originally Posted by shawno72

Hey Rob forget all the fuss and pm me your paypal if you do paypal. They are better than what I got so I'll take them.

, sent.

jbice70gmc · 12-23-2011, 08:21 PM

What shocks are you changing over to?

**Hart_Rod** · 12-23-2011, 08:23 PM

Quote:

Originally Posted by jbice70gmc

What shocks are you changing over to?

I installed a set of Porterbuilt shock relocators.

jbice70gmc · 12-23-2011, 08:25 PM

I'm going with the No Limit rears. Would be intersested in how these turn out, Have been watching your build thread.

shawno72 · 12-23-2011, 08:39 PM

Ok sorry for jumping the gun, I need a new set of lowered shocks badly, but I think these are going to be to tall. Thanks for being quick with the replies Rob. Have a Merry Christmas.
Posted via Mobile Device

**Hart_Rod** · 12-23-2011, 08:45 PM

Quote:

Originally Posted by shawno72

Ok sorry for jumping the gun, I need a new set of lowered shocks badly, but I think these are going to be to tall. Thanks for being quick with the replies Rob. Have a Merry Christmas.
Posted via Mobile Device

No worries. Same to you.

R/

**MisterC** · 12-24-2011, 02:22 AM

Tough to follow, but I think the end result is that they're still for sale. If that's the case, I'll take them. PM me the paypal info and we'll consider this post history.

**Hart_Rod** · 12-24-2011, 11:03 AM

Quote:

Originally Posted by MisterC

Tough to follow, but I think the end result is that they're still for sale. If that's the case, I'll take them. PM me the paypal info and we'll consider this post history.

PM sent with payment information.
Posted via Mobile Device

**MisterC** · 12-24-2011, 05:28 PM

Done! Thank you.

12-23-2011, 12:07 PM	#1
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	KYB front lowering shocks I switched to a shorter shock. These have less than 2K miles on them. $45 shipped CONUS. R/ __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

12-23-2011, 12:32 PM	#2
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: KYB front lowering shocks Will they fit 3" lowered springs. I'll take them if they do. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

12-23-2011, 01:31 PM	#5
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: KYB front lowering shocks According to the Summit website it states that these are for stock height vehicles. Did you experience a problem with them and that's why you are going with a lower shock? __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

12-23-2011, 07:36 PM	#7
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: KYB front lowering shocks Ignore the PM. If you could take some measurements I am extremely interested. What I have is 3" drop springs and plan to install drop spindles in the next few months to follow. I know that the spindles don't change anything with the shocks. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

12-23-2011, 08:01 PM	#10
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: KYB front lowering shocks Extended - 15" Compresssed - 9 3/4" __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

12-23-2011, 08:03 PM	#11
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: KYB front lowering shocks Hey Rob forget all the fuss and pm me your paypal if you do paypal. They are better than what I got so I'll take them. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

12-23-2011, 08:21 PM	#13
jbice70gmc Registered User Join Date: May 2011 Location: Atascocita, TX Posts: 188	Re: KYB front lowering shocks What shocks are you changing over to? __________________ 1969 GMC SWB Fleetside http://67-72chevytrucks.com/vboard/s...d.php?t=486320

12-23-2011, 08:25 PM	#15
jbice70gmc Registered User Join Date: May 2011 Location: Atascocita, TX Posts: 188	Re: KYB front lowering shocks I'm going with the No Limit rears. Would be intersested in how these turn out, Have been watching your build thread. __________________ 1969 GMC SWB Fleetside http://67-72chevytrucks.com/vboard/s...d.php?t=486320

12-23-2011, 08:39 PM	#16
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: KYB front lowering shocks Ok sorry for jumping the gun, I need a new set of lowered shocks badly, but I think these are going to be to tall. Thanks for being quick with the replies Rob. Have a Merry Christmas. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

12-24-2011, 02:22 AM	#18
MisterC Senior Member Join Date: Sep 2011 Location: Hanford, CA Posts: 1,027	Re: KYB front lowering shocks Tough to follow, but I think the end result is that they're still for sale. If that's the case, I'll take them. PM me the paypal info and we'll consider this post history. __________________ Poor and content is Rich...and Rich enough! - William Shakespeare 1966 C10 Custom Cab "Luigi" Big Window - SWB Fleetside 350 V-8 - Powerglide My not so much a build thread as a "Slow Progression Thread":http://67-72chevytrucks.com/vboard/s...d.php?t=486894

12-24-2011, 05:28 PM	#20
MisterC Senior Member Join Date: Sep 2011 Location: Hanford, CA Posts: 1,027	Re: KYB front lowering shocks Done! Thank you. __________________ Poor and content is Rich...and Rich enough! - William Shakespeare 1966 C10 Custom Cab "Luigi" Big Window - SWB Fleetside 350 V-8 - Powerglide My not so much a build thread as a "Slow Progression Thread":http://67-72chevytrucks.com/vboard/s...d.php?t=486894



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.