VA Show quality tach dash - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 12-28-2011, 03:08 AM

I have a tach dash that's been tested and I've restored with a new lense, new (reproduction) tach, new printed circuit, new bulbs, cleaned bulb holders, perfect tins, and very nice original gauges.

The company I got the repro tach from says you can use it with HEI but others do not recommend using aftermarket tachs with HEI and several members have had issues...others have used for thousands of miles with no issues.

This is a show quality cluster and comparable to the $650 ones the parts places sell.

Price is $395 shipped total FIRM. There are well over $300 worth of new parts on this cluster.

OR 450 shipped if I put a very nice factory tach in place of the aftermarket tach

I also have a factory and an aftermarket wiring harness available. 25 for either shipped with the tach setup. 30 shipped for a setup to use for HEI

Please post in thread. First "I'll take it"

Check, money order, or paypal (I pay the fees)

Thanks

flashed · 12-29-2011, 12:02 AM

Man thats nice ,maybe someday . TTT for you anyway.

**Already Gone** · 12-29-2011, 12:47 AM

So the first picture is the way it was before you refurbished it and the second after the refurb.

VA72C10 · 12-29-2011, 12:54 AM

actually just no flash then flash. I don't have a before on this one. I used the best parts from two dashes and the new tach, bezel, lens, and printed circuit

70LonghornCST · 12-29-2011, 01:44 AM

As always, VERY NICE!

Midniteotto · 12-29-2011, 05:16 AM

I think you need to go on a long vacation and leave me a key under the doormat....I'll just pickup them old seats, consoles,BBC pumps and brackets and may as well get this ol' dash out of your way also..LOL! !! GLWTS! wish I had the bills to buy it all!!
Posted via Mobile Device

flashed · 12-29-2011, 10:56 AM

I wish I could buy it too but not happening at this time. Back TTT.

**72 paul** · 12-29-2011, 01:33 PM

I will take it. with factory tach and factory wire harness. 475.00. can send postal mo. need your payment address. thanks

**72 paul** · 12-29-2011, 10:40 PM

is dash still up for sale?

Midniteotto · 12-29-2011, 10:45 PM

Quote:

Originally Posted by 72 paul

is dash still up for sale?

I? Sure it is...he just bumped it up last night...I've noticeed he's usually not on till late night or early morning...be patient grasshopper..I'm sure the quality is worth waithing on..LOL!
Posted via Mobile Device

VA72C10 · 12-30-2011, 12:34 AM

Quote:

Originally Posted by 72 paul

I will take it. with factory tach and factory wire harness. 475.00. can send postal mo. need your payment address. thanks

yes, pm sent with payment info. Sorry for the delay. Just got in from "date night" with my wife

VA72C10 · 03-07-2012, 04:14 PM

Quote:

Originally Posted by 72 paul

I will take it. with factory tach and factory wire harness. 475.00. can send postal mo. need your payment address. thanks

Just confirming that I will be refunding 440. You still have the factory wiring harness which I generally sell for 35-45. Or if you want to send the wiring harness back I will refund the full 475. Let me know what you prefer. Also, I just checked and I will need to transfer funds from paypal to checking so it might take a couple days to have the cash for the money order.

**72 paul** · 03-07-2012, 04:29 PM

jonathan 450 with fact tach, 25 with fact wire. 450 ,ill keep the wire.

Lee H · 12-29-2011, 11:09 PM

Smoking hot deal!! I bought a "restored" tach/ vac dash here last year for 425. I've had to replace the vac, tach, and oil gages sense :-(. (not from VA72C10)
Posted via Mobile Device

VA72C10 · 01-01-2012, 09:05 PM

Sold pending payment. I will be making another one now with the aftermarket tach. Will post soon...

**72 paul** · 01-14-2012, 05:02 PM

jonathan do the usa circut. call when you can. thanks, Paul.

rickairbound1 · 01-14-2012, 08:12 PM

Do yo still have it? If so, let me know. I am interested in buying with after market tach and wiring.

Rick

VA72C10 · 01-14-2012, 08:34 PM

Quote:

Originally Posted by 72 paul

jonathan do the usa circut. call when you can. thanks, Paul.

Good talking with you. Will do the USA circuit and swap the factory tach in.

Quote:

Originally Posted by rickairbound1

Do yo still have it? If so, let me know. I am interested in buying with after market tach and wiring.

Rick

I have this tach as shown and can make another dash in a couple days that looks the same. I can use the green circuit board pictured or a white made in the USA one which Paul chose. Pm sent with payment info...

HeavyMetalChevy · 01-14-2012, 08:42 PM

Quote:

Originally Posted by VA72C10

Good talking with you. Will do the USA circuit and swap the factory tach in.

I have this tach as shown and can make another dash in a couple days that looks the same. I can use the green circuit board pictured or a white made in the USA one which Paul chose. Pm sent with payment info...

GOOD DEAL BUDDY!!! I almost finally got my hands on a fact. tach and it slipped through on me locally!!!

but still

for you

**72 paul** · 01-30-2012, 02:47 PM

whats happining today Jonathan?

boonedogs72 · 01-31-2012, 11:22 AM

pm me with a price on a tach dash with wiring harness for HEI.

thanks
boonie

VA72C10 · 01-31-2012, 12:10 PM

Quote:

Originally Posted by 72 paul

whats happining today Jonathan?

Quote:

Originally Posted by boonedogs72

pm me with a price on a tach dash with wiring harness for HEI.

thanks
boonie

pm's sent

**72 paul** · 02-02-2012, 01:24 PM

whats happening today, Jonathan???

rickairbound1 · 02-02-2012, 02:04 PM

Johnathon,

What was the total price?

Rick

VA72C10 · 02-02-2012, 04:37 PM

Quote:

Originally Posted by 72 paul

whats happening today, Jonathan???

Quote:

Originally Posted by rickairbound1

Johnathon,

What was the total price?

Rick

For another dash with GM factory tach and HEI wiring 480 shipped

sending pm's

12-28-2011, 03:08 AM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Show quality tach dash I have a tach dash that's been tested and I've restored with a new lense, new (reproduction) tach, new printed circuit, new bulbs, cleaned bulb holders, perfect tins, and very nice original gauges. The company I got the repro tach from says you can use it with HEI but others do not recommend using aftermarket tachs with HEI and several members have had issues...others have used for thousands of miles with no issues. This is a show quality cluster and comparable to the $650 ones the parts places sell. Price is $395 shipped total FIRM. There are well over $300 worth of new parts on this cluster. OR 450 shipped if I put a very nice factory tach in place of the aftermarket tach I also have a factory and an aftermarket wiring harness available. 25 for either shipped with the tach setup. 30 shipped for a setup to use for HEI Please post in thread. First "I'll take it" Check, money order, or paypal (I pay the fees) Thanks __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-29-2011, 12:02 AM	#2
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Show quality tach dash Man thats nice ,maybe someday . TTT for you anyway.

12-29-2011, 12:47 AM	#3
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,143	Re: Show quality tach dash So the first picture is the way it was before you refurbished it and the second after the refurb. __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

12-29-2011, 12:54 AM	#4
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Show quality tach dash actually just no flash then flash. I don't have a before on this one. I used the best parts from two dashes and the new tach, bezel, lens, and printed circuit __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-29-2011, 01:44 AM	#5
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Show quality tach dash As always, VERY NICE! __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

12-29-2011, 05:16 AM	#6
Midniteotto Registered User Join Date: Dec 2011 Location: Danville AL Posts: 121	Re: Show quality tach dash I think you need to go on a long vacation and leave me a key under the doormat....I'll just pickup them old seats, consoles,BBC pumps and brackets and may as well get this ol' dash out of your way also..LOL! !! GLWTS! wish I had the bills to buy it all!! Posted via Mobile Device __________________ SPID Decoder http://outintheshop.com/options.html BBC Engine Parts ID http://www.nastyz28.com/index.php?page=bigblockchevy

12-29-2011, 10:56 AM	#7
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Show quality tach dash I wish I could buy it too but not happening at this time. Back TTT.

12-29-2011, 01:33 PM	#8
72 paul Senior Member Join Date: May 2011 Location: las vegas'nv Posts: 499	Re: Show quality tach dash I will take it. with factory tach and factory wire harness. 475.00. can send postal mo. need your payment address. thanks

12-29-2011, 10:40 PM	#9
72 paul Senior Member Join Date: May 2011 Location: las vegas'nv Posts: 499	Re: Show quality tach dash is dash still up for sale?

03-07-2012, 04:29 PM	#13
72 paul Senior Member Join Date: May 2011 Location: las vegas'nv Posts: 499	Re: Show quality tach dash jonathan 450 with fact tach, 25 with fact wire. 450 ,ill keep the wire.

12-29-2011, 11:09 PM	#14
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,147	Re: Show quality tach dash Smoking hot deal!! I bought a "restored" tach/ vac dash here last year for 425. I've had to replace the vac, tach, and oil gages sense :-(. (not from VA72C10) Posted via Mobile Device __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703 Last edited by Lee H; 12-29-2011 at 11:18 PM.

01-01-2012, 09:05 PM	#15
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Show quality tach dash Sold pending payment. I will be making another one now with the aftermarket tach. Will post soon... __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-14-2012, 05:02 PM	#16
72 paul Senior Member Join Date: May 2011 Location: las vegas'nv Posts: 499	Re: Show quality tach dash jonathan do the usa circut. call when you can. thanks, Paul.

01-14-2012, 08:12 PM	#17
rickairbound1 Registered User Join Date: Aug 2011 Location: San Antonio, TX Posts: 91	Re: Show quality tach dash Do yo still have it? If so, let me know. I am interested in buying with after market tach and wiring. Rick

01-30-2012, 02:47 PM	#20
72 paul Senior Member Join Date: May 2011 Location: las vegas'nv Posts: 499	Re: Show quality tach dash whats happining today Jonathan?



Register or Log In To remove these advertisements.

01-31-2012, 11:22 AM	#21
boonedogs72 Registered User Join Date: Apr 2005 Location: redding ca Posts: 1,438	Re: Show quality tach dash pm me with a price on a tach dash with wiring harness for HEI. thanks boonie

02-02-2012, 01:24 PM	#23
72 paul Senior Member Join Date: May 2011 Location: las vegas'nv Posts: 499	Re: Show quality tach dash whats happening today, Jonathan???

02-02-2012, 02:04 PM	#24
rickairbound1 Registered User Join Date: Aug 2011 Location: San Antonio, TX Posts: 91	Re: Show quality tach dash Johnathon, What was the total price? Rick

Register or Log In To remove these advertisements.