NC WTB: Dana 44 gears - The 1947 - Present Chevrolet & GMC Truck Message Board Network

47thriftmaster · 01-07-2012, 01:45 AM

Looking for Ring and Pinion gears for my Dana 44 front axle in 3.73 ratio, to fit my original carrier (3.73 down). I would like to match the front and rear gears. Post in thread if you have it. Thank you

47thriftmaster · 01-07-2012, 12:20 PM

ttt

47thriftmaster · 01-08-2012, 12:20 AM

Nothing out there I guess. ttt for one more try

**tll74** · 01-08-2012, 01:02 AM

No problem, I have many sets. 75.00 plus shipping

47thriftmaster · 01-08-2012, 01:42 AM

Are they GM part number gears or aftermarket? What would shipping be to 28327? Thanks

Quote:

Originally Posted by tll74

No problem, I have many sets. 75.00 plus shipping

ORANGBLAZ · 01-11-2012, 11:44 AM

Monte, are you looking for new or used?

47thriftmaster · 01-11-2012, 07:43 PM

Does not matter new or used, as long as it's a good set for my front end.

Quote:

Originally Posted by ORANGBLAZ

Monte, are you looking for new or used?

**tll74** · 01-11-2012, 02:46 PM

Quote:

Originally Posted by 47thriftmaster

Are they GM part number gears or aftermarket? What would shipping be to 28327? Thanks

These are original Dana/Spicer gears with Dana numbers. Dana gears typically only have dana part numbers. They are in like new condition. Shipping would be 24.60. Thanks

47thriftmaster · 01-11-2012, 07:44 PM

Sounds good to me, let me know how you want to take care of it. What is the part number on that set? Thank you for the help.

Quote:

Originally Posted by tll74

These are original Dana/Spicer gears with Dana numbers. Dana gears typically only have dana part numbers. They are in like new condition. Shipping would be 24.60. Thanks

47thriftmaster · 01-13-2012, 06:36 PM

Any luck on those numbers? Thanks

**D.PASSMORE** · 01-13-2012, 07:34 PM

It says 12 Bolt, I'm pretty sure it a reverse cut for a Dana 44. Maybe some one can verify. Good buy though.

http://www.ebay.com/itm/NOS-1963-196...item5ae3db0601

47thriftmaster · 01-13-2012, 11:08 PM

Thank you David, but that is for a 12bolt rear. Original part number for K10's with 3.73 gears.

**D.PASSMORE** · 01-13-2012, 11:35 PM

Rear 3.73 / 12 bolt is GM part # 38177781. This # has changed a few times. But, I'm sure the gear FS isn't one of them. I also emailed the guy selling and he confirmed that it is for a D44. Of course, its your call...

47thriftmaster · 01-14-2012, 12:32 AM

Thanks David, I'm going to wait for tll74 to get back with me about his Dana Spicer ring and pinion.

**tll74** · 01-14-2012, 01:42 AM

I went to get the gears for the numbers and they are gone. One of my guys may have tossed them out for scrap

. I do have them in a couple of front axle assemblies. I could get them out next week if wanted. Sorry for the delay. Thanks, Tom

47thriftmaster · 01-14-2012, 12:47 PM

Quote:

Originally Posted by tll74

I went to get the gears for the numbers and they are gone. One of my guys may have tossed them out for scrap

. I do have them in a couple of front axle assemblies. I could get them out next week if wanted. Sorry for the delay. Thanks, Tom

Just my luck

Sounds good, will wait to see if you can pull another good set out. No problem on the delay, thanks for the help, hopefully there is a good set. Thank you

1972CST · 01-25-2012, 07:23 PM

Hey I think it works over here!

1972CST · 02-01-2012, 08:37 PM

There are a few very slight pits from where the ring gear had some surface rust.

01-07-2012, 01:45 AM	#1
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	WTB: Dana 44 gears Looking for Ring and Pinion gears for my Dana 44 front axle in 3.73 ratio, to fit my original carrier (3.73 down). I would like to match the front and rear gears. Post in thread if you have it. Thank you

01-07-2012, 12:20 PM	#2
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: WTB: Dana 44 gears ttt

01-08-2012, 12:20 AM	#3
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: WTB: Dana 44 gears Nothing out there I guess. ttt for one more try

01-08-2012, 01:02 AM	#4
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: WTB: Dana 44 gears No problem, I have many sets. 75.00 plus shipping __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-11-2012, 11:44 AM	#6
ORANGBLAZ Registered User Join Date: Jun 2010 Location: Cairo,NY Posts: 353	Re: WTB: Dana 44 gears Monte, are you looking for new or used?

01-13-2012, 06:36 PM	#10
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: WTB: Dana 44 gears Any luck on those numbers? Thanks

01-13-2012, 07:34 PM	#11
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: WTB: Dana 44 gears It says 12 Bolt, I'm pretty sure it a reverse cut for a Dana 44. Maybe some one can verify. Good buy though. http://www.ebay.com/itm/NOS-1963-196...item5ae3db0601 __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

01-13-2012, 11:08 PM	#12
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: WTB: Dana 44 gears Thank you David, but that is for a 12bolt rear. Original part number for K10's with 3.73 gears.

01-13-2012, 11:35 PM	#13
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: WTB: Dana 44 gears Rear 3.73 / 12 bolt is GM part # 38177781. This # has changed a few times. But, I'm sure the gear FS isn't one of them. I also emailed the guy selling and he confirmed that it is for a D44. Of course, its your call... Last edited by D.PASSMORE; 01-14-2012 at 09:46 AM.

01-14-2012, 12:32 AM	#14
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: WTB: Dana 44 gears Thanks David, I'm going to wait for tll74 to get back with me about his Dana Spicer ring and pinion.

01-14-2012, 01:42 AM	#15
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: WTB: Dana 44 gears I went to get the gears for the numbers and they are gone. One of my guys may have tossed them out for scrap. I do have them in a couple of front axle assemblies. I could get them out next week if wanted. Sorry for the delay. Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-25-2012, 07:23 PM	#17
1972CST Registered User Join Date: Mar 2008 Location: Concord NC Posts: 511	Re: WTB: Dana 44 gears Hey I think it works over here! Attached Images

02-01-2012, 08:37 PM	#18
1972CST Registered User Join Date: Mar 2008 Location: Concord NC Posts: 511	Re: WTB: Dana 44 gears There are a few very slight pits from where the ring gear had some surface rust. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.