kicking a dead horse? IROC steering conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

INSIDIOUS '86 · 01-09-2012, 01:30 AM

so from my searches the general consensus is that our trucks have the same steering boxes as most other 3rd gen g body and f body cars just the mounting is on oppisite sides

IT WAS MENTIONED that it MAY be possible to transfer the internals of a quick ratio IROC stearing box into our trucks
after that was said there has been no word again about it being done or any mention

so has anybody rebuilt a steering box on either vehicles? camaro or truck
im half expecting keith to chime on this since he was an assembly line guy

right now if this can be done I will be providing the conversion as a service when I become a supporting member in march

http://shop.advanceautoparts.com/web...PSTERAMS_____#

bdiamond · 01-15-2013, 03:36 PM

No you can't. Our boxes are I believe Saginaw 808 and not the 800 put in passenger cars. The pistons are different sizes.

68Timber · 01-15-2013, 06:44 PM

I found a guy that can change our steering boxes to 2.75 turns lock to lock for around $225 with a core. I decided against it when I went with drag radials on the rear. I don't have that number saved on this computer but may still have it at home if you want me to look it up.

G8DAN · 01-15-2013, 06:57 PM

I would be interested in that. Could you please?

68Timber · 01-15-2013, 08:11 PM

Quote:

Originally Posted by G8DAN

I would be interested in that. Could you please?

I found it. Here's what I got from a search and inquiry in Nov 2009.

We can custom build a 2.75 turn box for $225 plus $75 core deposit. It would take a few days to build.

Feel free to contact us with further questions or to order.

Thanks,
Scott

1-800-399-7845
sales@CarSteering.com
www.CarSteering.com

bdiamond · 01-15-2013, 07:07 PM

The guy at AGR shot me a price of $300 if I picked it up and brought him a core. They make the 12.7 gears themselves. I think the only used part is the housing.

83GMCK2500 · 01-15-2013, 07:24 PM

I researched rebuilding or having my steering box rebuilt...came across this site: http://www.lee-powersteering.com/index.htm I see where they can change ratios, might contact them.

INSIDIOUS '86 · 01-15-2013, 09:48 PM

Sweet. Guys. I was just about to get e new box for my truck here soon too!
Posted via Mobile Device

wraprail · 01-16-2013, 07:28 AM

Quote:

Originally Posted by INSIDIOUS '86

right now if this can be done I will be providing the conversion as a service when I become a supporting member in march

Why wait till march..
It's only like $25 dude

INSIDIOUS '86 · 01-16-2013, 06:38 PM

Quote:

Originally Posted by wraprail

Why wait till march..
It's only like $25 dude

That was a long time ago. I have a kid and my truck the kid rent and all else comes first. $25 is a week of gas for me lol. I'm planning on getting my products going but a lathe failure has set me back big time
Posted via Mobile Device

wraprail · 01-17-2013, 04:29 AM

Didn't notice the date in op. 2012.. lol my bad. I'm jus messin with you anyways dude...
Good luck in 2013!

INSIDIOUS '86 · 01-17-2013, 02:19 PM

Quote:

Originally Posted by wraprail

Didn't notice the date in op. 2012.. lol my bad. I'm jus messin with you anyways dude...
Good luck in 2013!

Yah thanks!
Posted via Mobile Device

01-09-2012, 01:30 AM	#1
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	kicking a dead horse? IROC steering conversion so from my searches the general consensus is that our trucks have the same steering boxes as most other 3rd gen g body and f body cars just the mounting is on oppisite sides IT WAS MENTIONED that it MAY be possible to transfer the internals of a quick ratio IROC stearing box into our trucks after that was said there has been no word again about it being done or any mention so has anybody rebuilt a steering box on either vehicles? camaro or truck im half expecting keith to chime on this since he was an assembly line guy right now if this can be done I will be providing the conversion as a service when I become a supporting member in march http://shop.advanceautoparts.com/web...PSTERAMS_____# __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

01-15-2013, 03:36 PM	#2
bdiamond Registered User Join Date: Sep 2007 Location: Wichita Falls, Texas Posts: 459	Re: kicking a dead horse? IROC steering conversion No you can't. Our boxes are I believe Saginaw 808 and not the 800 put in passenger cars. The pistons are different sizes.

01-15-2013, 06:44 PM	#3
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: kicking a dead horse? IROC steering conversion I found a guy that can change our steering boxes to 2.75 turns lock to lock for around $225 with a core. I decided against it when I went with drag radials on the rear. I don't have that number saved on this computer but may still have it at home if you want me to look it up. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

01-15-2013, 06:57 PM	#4
G8DAN Registered User Join Date: Dec 2012 Location: Sylmar, CA Posts: 79	Re: kicking a dead horse? IROC steering conversion I would be interested in that. Could you please?

01-15-2013, 07:07 PM	#6
bdiamond Registered User Join Date: Sep 2007 Location: Wichita Falls, Texas Posts: 459	Re: kicking a dead horse? IROC steering conversion The guy at AGR shot me a price of $300 if I picked it up and brought him a core. They make the 12.7 gears themselves. I think the only used part is the housing.

01-15-2013, 07:24 PM	#7
83GMCK2500 Registered User Join Date: Sep 2009 Location: Beaverton, OR from WA State Posts: 1,515	Re: kicking a dead horse? IROC steering conversion I researched rebuilding or having my steering box rebuilt...came across this site: http://www.lee-powersteering.com/index.htm I see where they can change ratios, might contact them. __________________ Devin 1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt 1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050 1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350 My Introduction with my '83s History New Daily, the '96

01-15-2013, 09:48 PM	#8
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: kicking a dead horse? IROC steering conversion Sweet. Guys. I was just about to get e new box for my truck here soon too! Posted via Mobile Device __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

01-17-2013, 04:29 AM	#11
wraprail Registered User Join Date: Sep 2010 Location: Lake Havasu City Arizona Posts: 863	Re: kicking a dead horse? IROC steering conversion Didn't notice the date in op. 2012.. lol my bad. I'm jus messin with you anyways dude... Good luck in 2013!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.