[Sound Clip] My Truck at idle :D - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TIMSPEED · 04-25-2003, 08:34 PM

Here's what the new setup sounds like.
This is:
Hedman 1 5/8 Long Tubes -> 2¼" Y-pipe -> Stock Cat -> Flowmaster 2½" In/Out 2 Chamber 40 series Muffler, dumped just before rear axle.
This clip was taken with the camera 5' away from the muffler, at the same heighth from the ground. Enjoy!
BTW: This is in PARK @ 850rpm.
My Truck Idling

boataddict26 · 04-25-2003, 08:41 PM

Sounds good!! Need a good cam though to give it that lopey idle!!

TIMSPEED · 04-25-2003, 08:44 PM

Yeah...I was gonna cam it, but for $1200 with a 4 year/45k mile warranty..I just couldn't pass it up! If I bring the idle down to 600rpm, it's got a more noticeable lope.

boataddict26 · 04-25-2003, 08:48 PM

Do you have any pics.?

gldevall · 04-25-2003, 09:49 PM

Sounds good. I need to get mine on here. But I cannot get ny dam camcorder to load into my computer.

BaggedC10 · 04-25-2003, 09:50 PM

TIMSPEED---Where did you purchase that motor and how much? If you don't mind me asking...???

TIMSPEED · 04-26-2003, 03:51 AM

Daniel,
I got it from Rettig Bros., Here in Modesto. I paid I think $1500 up front (cuz I wanted them to put the oil pan and timing chain cover on for me), and then I got back $200, because my crank was TOAST and one of my heads was cracked. But I think if you just went in and had NO core (cuz you have a 305, and you're going to a 355cid), and you can put the timing chain cover and oil pan on yourself, it'd be like $1200 out the door. It's guranteed for 4 year/45k mile. The first year is 100% parts AND labor (meaning I'd just bring the entire vehicle to them and then they'd fix it)
But to get this warranty, you must have:
Brand New Water Pump, Radiator, Belts, Hoses, etc. So...I say it was a good deal. It's got a SMALL cam in it. They said with my setup, I should make 225rwhp, so...in a 3800# truck, that should work out nicely.

79BIG10 · 04-26-2003, 07:49 AM

Here's mine. Make sure to turn down because it gets revved up

Exhaust MP3 I did this awhile back and had my truck backed up to the window where the mic was. This is dual 40 series chamber Flowmasters with X pipe dumped under the bed before the axle and idling at 600RPM then up the power band as you will hear.

Since hearing LOHRTBT's truck with Aerochambers dumped I want those now. For the right price I'd sell these Flowmasters and get the Aero's

84Stepper · 04-26-2003, 03:30 PM

Whats the deal with these aero chambers? Everyone is saying how much better they are than flows. I dont think they sound any different than 40 series flows. I guess I just need to hear them in real life. Hopefully I will on may 10th.

BaggedC10 · 04-26-2003, 09:34 PM

Quote:

Originally posted by TIMSPEED
Daniel,
I got it from Rettig Bros., Here in Modesto. I paid I think $1500 up front (cuz I wanted them to put the oil pan and timing chain cover on for me), and then I got back $200, because my crank was TOAST and one of my heads was cracked. But I think if you just went in and had NO core (cuz you have a 305, and you're going to a 355cid), and you can put the timing chain cover and oil pan on yourself, it'd be like $1200 out the door. It's guranteed for 4 year/45k mile. The first year is 100% parts AND labor (meaning I'd just bring the entire vehicle to them and then they'd fix it)
But to get this warranty, you must have:
Brand New Water Pump, Radiator, Belts, Hoses, etc. So...I say it was a good deal. It's got a SMALL cam in it. They said with my setup, I should make 225rwhp, so...in a 3800# truck, that should work out nicely.

Thanks for the information. I may be purchasing a crate motor soon, so keep that place in mind for me.

04-25-2003, 08:34 PM	#1
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	[Sound Clip] My Truck at idle :D Here's what the new setup sounds like. This is: Hedman 1 5/8 Long Tubes -> 2¼" Y-pipe -> Stock Cat -> Flowmaster 2½" In/Out 2 Chamber 40 series Muffler, dumped just before rear axle. This clip was taken with the camera 5' away from the muffler, at the same heighth from the ground. Enjoy! BTW: This is in PARK @ 850rpm. My Truck Idling __________________ I have a few cars... See Them Here

04-25-2003, 08:41 PM	#2
boataddict26 Registered User Join Date: Mar 2003 Location: North Central Florida Posts: 726	Sounds good!! Need a good cam though to give it that lopey idle!! __________________ 1978 Chevy C10 Currently under resto. 350 Getting face lift. .060, JEpistons, Modify heads. More will come with money.

04-25-2003, 08:44 PM	#3
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	Yeah...I was gonna cam it, but for $1200 with a 4 year/45k mile warranty..I just couldn't pass it up! If I bring the idle down to 600rpm, it's got a more noticeable lope. __________________ I have a few cars... See Them Here

04-25-2003, 08:48 PM	#4
boataddict26 Registered User Join Date: Mar 2003 Location: North Central Florida Posts: 726	Do you have any pics.? __________________ 1978 Chevy C10 Currently under resto. 350 Getting face lift. .060, JEpistons, Modify heads. More will come with money.

04-25-2003, 09:49 PM	#5
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Sounds good. I need to get mine on here. But I cannot get ny dam camcorder to load into my computer. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

04-25-2003, 09:50 PM	#6
BaggedC10 Under construction! Join Date: Aug 2002 Location: NorCal Posts: 1,065	TIMSPEED---Where did you purchase that motor and how much? If you don't mind me asking...??? __________________ 2001 Silverado bagged on 22's. Sold

04-26-2003, 03:51 AM	#7
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	Daniel, I got it from Rettig Bros., Here in Modesto. I paid I think $1500 up front (cuz I wanted them to put the oil pan and timing chain cover on for me), and then I got back $200, because my crank was TOAST and one of my heads was cracked. But I think if you just went in and had NO core (cuz you have a 305, and you're going to a 355cid), and you can put the timing chain cover and oil pan on yourself, it'd be like $1200 out the door. It's guranteed for 4 year/45k mile. The first year is 100% parts AND labor (meaning I'd just bring the entire vehicle to them and then they'd fix it) But to get this warranty, you must have: Brand New Water Pump, Radiator, Belts, Hoses, etc. So...I say it was a good deal. It's got a SMALL cam in it. They said with my setup, I should make 225rwhp, so...in a 3800# truck, that should work out nicely. __________________ I have a few cars... See Them Here

04-26-2003, 07:49 AM	#8
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	Here's mine. Make sure to turn down because it gets revved up Exhaust MP3 I did this awhile back and had my truck backed up to the window where the mic was. This is dual 40 series chamber Flowmasters with X pipe dumped under the bed before the axle and idling at 600RPM then up the power band as you will hear. Since hearing LOHRTBT's truck with Aerochambers dumped I want those now. For the right price I'd sell these Flowmasters and get the Aero's __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson Last edited by 79BIG10; 04-26-2003 at 07:52 AM.

04-26-2003, 03:30 PM	#9
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	Whats the deal with these aero chambers? Everyone is saying how much better they are than flows. I dont think they sound any different than 40 series flows. I guess I just need to hear them in real life. Hopefully I will on may 10th. __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.