TN 1968 Stainless Grille Mouldings - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NoNeck · 01-26-2012, 12:55 PM

I have upper and lower stainless grille mouldings that were removed from a 1968 C10. I have not tried to polish them, so they are driver quality with a few small dents and scratches.

Asking $25 plus shipping from ZIP 37379. First "I'll take them" get them. Please reply in thread.

Thanks, Wayne (NoNeck)

mahanian · 01-26-2012, 01:07 PM

I'll take them pending shipping!
Posted via Mobile Device

NoNeck · 01-26-2012, 01:14 PM

Quote:

I'll take them pending shipping!

That was fast! mahanian, PM your address with ZIP to me and I will get you a shipping quote. It might be tomorrow, is that OK?

Thanks, Wayne

mahanian · 01-26-2012, 01:38 PM

Quote:

Originally Posted by NoNeck

That was fast! mahanian, PM your address with ZIP to me and I will get you a shipping quote. It might be tomorrow, is that OK?

Thanks, Wayne

PM sent Wayne, no rush on the quote, thanks!

**michael bustamante** · 01-26-2012, 01:13 PM

Ill be next

**kev2809** · 01-26-2012, 01:27 PM

ill take them if it gets to me

77471
Posted via Mobile Device

CC69Rat · 01-26-2012, 01:34 PM

No Neck's my dad ..

These hoops came off a very nice Wyoming grille I bought from Sharpie on the forums. If you know the quality of his stuff. Good deal on these.

chopnchaneled · 01-26-2012, 01:57 PM

WELL !!!!!!!! MISSED ANOTHER DEAL!

Posted at 11:55 AM sold 12:07

What do you guys have ??? Some sort of wireless notifier

BigCountryx · 01-26-2012, 11:45 PM

Dang, I needed these
Posted via Mobile Device

NoNeck · 01-27-2012, 01:03 PM

Hey Jared (mahanian),

The shipping on the grille hoops will be $28.98 to ZIP 85224. Sounds a little high, but the box measures 55" x 6" x 6" (oversize USPS). Let me know and I will PM my PayPal or Money Order works, too.

If Jared passes, next in line is Michael Bustamante then Kev2809. I would expect shipping would run about the same in the continental US.

NoNeck

mahanian · 01-27-2012, 01:08 PM

Thanks Wayne, I'll take them, does paypal work for you? Shoot me a PM with your payment info

NoNeck · 01-27-2012, 01:22 PM

Jared, PM sent. Grille mouldings sold to Jared (mahanian) pending payment. Thanks!

NoNeck

NoNeck · 01-30-2012, 06:07 PM

Jared -

Your grille mouldings have been shipped. I have PM'd you with your tracking number.

Thanks!

Wayne

01-26-2012, 12:55 PM	#1
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	1968 Stainless Grille Mouldings I have upper and lower stainless grille mouldings that were removed from a 1968 C10. I have not tried to polish them, so they are driver quality with a few small dents and scratches. Asking $25 plus shipping from ZIP 37379. First "I'll take them" get them. Please reply in thread. Thanks, Wayne (NoNeck) Attached Images __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

01-26-2012, 01:07 PM	#2
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 1968 Stainless Grille Mouldings I'll take them pending shipping! Posted via Mobile Device __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

01-26-2012, 01:13 PM	#5
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: 1968 Stainless Grille Mouldings Ill be next __________________ 1967custom

01-26-2012, 01:27 PM	#6
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: 1968 Stainless Grille Mouldings ill take them if it gets to me 77471 Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-26-2012, 01:34 PM	#7
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,212	Re: 1968 Stainless Grille Mouldings No Neck's my dad .. These hoops came off a very nice Wyoming grille I bought from Sharpie on the forums. If you know the quality of his stuff. Good deal on these. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

01-26-2012, 01:57 PM	#8
chopnchaneled Registered User Join Date: Dec 2009 Location: Atlanta, Ga. Posts: 1,050	Re: 1968 Stainless Grille Mouldings WELL !!!!!!!! MISSED ANOTHER DEAL! Posted at 11:55 AM sold 12:07 What do you guys have ??? Some sort of wireless notifier __________________ I don't think we get smarter as we get older. We just run out of Stupid things to do.

01-26-2012, 11:45 PM	#9
BigCountryx Registered User Join Date: May 2009 Location: Gonzales, LA Posts: 779	Re: 1968 Stainless Grille Mouldings Dang, I needed these Posted via Mobile Device __________________ 1972 Pale Yella 2WD Blazer ..... 350HO/700R4.... '68 Clipped 1970 Original Paint SWB Farm Truck ..... 5.3/4L80.... 2x HRPT Participant

01-27-2012, 01:03 PM	#10
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: 1968 Stainless Grille Mouldings Hey Jared (mahanian), The shipping on the grille hoops will be $28.98 to ZIP 85224. Sounds a little high, but the box measures 55" x 6" x 6" (oversize USPS). Let me know and I will PM my PayPal or Money Order works, too. If Jared passes, next in line is Michael Bustamante then Kev2809. I would expect shipping would run about the same in the continental US. NoNeck __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

01-27-2012, 01:08 PM	#11
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 1968 Stainless Grille Mouldings Thanks Wayne, I'll take them, does paypal work for you? Shoot me a PM with your payment info __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

01-27-2012, 01:22 PM	#12
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: 1968 Stainless Grille Mouldings Jared, PM sent. Grille mouldings sold to Jared (mahanian) pending payment. Thanks! NoNeck __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

01-30-2012, 06:07 PM	#13
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: 1968 Stainless Grille Mouldings Jared - Your grille mouldings have been shipped. I have PM'd you with your tracking number. Thanks! Wayne __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.